We met up with Jonathan Ferguson, Keeper of Firearms & Artillery at the Royal Armouries Museum in Leeds, to learn about a weapon that was made famous by the Boer and Zulu Wars: the Martini-Henry rifle.
During the 1860s, several European armies began to equip their troops with modern breech-loading rifles, leaving behind the now-outdated muzzle-loading musket. By the turn of the decade the British had adopted a breech-loading single-shot lever-action rifle - the Martini-Henry, named after Friedrich von Martini, a Swiss engineer and Alexander Henry, a Scottish gunsmith.
Produced at the Royal Small Arms Manufactory at Enfield, the Martini-Henry Rifle became the standard issue weapon for the British army from 1871 until 1889 and was used in campaigns across the British Empire, in Afghanistan, the far east, Sudan and South Africa.
The speed of innovation during the mid-19th Century was truly staggering. Within a few decades of the Napoleonic Wars, the British army’s standard issue weapon had evolved from a heavy, smoothbore Brown Bess musket to a deadly rifle equipped with a new breech-loading, ignition and rifling system.
The Martini-Henry rifle is still perhaps best known for being the weapon used by British redcoats during the Zulu Wars in southern Africa, made famous by the film ‘Zulu’ starring Sir Michael Caine, and in the Anglo-Boer War - both costly campaigns for the British.
During the latter conflict, the iconic rifle was actually outclassed by the Mauser Bolt-Action Rifle supplied in admittedly limited numbers to the Boers by the German Empire. Concerned with the superior performance of the Mauser, which, combined with guerrilla tactics, was inflicting heavy casualties, the British sought ways to improve the Martini Henry - leading to all sorts of innovations, some more successful than others...
In this video filmed at the Royal Armouries Museum in Leeds, History Hit presenters Luke Tomes and Louee Dessent are given a crash course in the history and development of arguably the most iconic British Empire rifle by firearms expert Jonathan Ferguson before testing out just how effective the rifle was in the hands of novices.
Later, Jonathan Ferguson would be firing the Martini-Henry rifle at simulated flesh and bone, to assess the deadliness of the weapon and the damage it would have inflicted on the battlefield.
Now, about a year ago we came to the Royal Armouries Museum and we shot three iconic weapons.
We shot an Arquebus, we shot a Brown Bess and we shot a Lee-Enfield.
But you were clamouring for another weapon.
That's right, we saw the comments. All of them.
But don't worry, we're not going to disappoint you this time.
No, in this video we're going to give you everything you could possibly want to know about the Martini Henry.
Don't say we don't spoil you.
As always, helping us handle the weapon and explore its history is firearms expert Jonathan Ferguson.
Later, Jonathan would be testing just how much damage this rifle would do against simulated flesh and bone.
Nice. Look at that. Fantastic.
This should be everything you need to cover the history of the Martini Henry.
During the 1860s, several European armies began to equip their troops with modern breech-loading rifles,
leaving behind the now outdated muzzle-loading musket, where the projectile had to be pushed down the barrel.
By the turn of the decade, the British had adopted a breech-loading, single-shot, lever-action rifle, the Martini Henry,
named after Friedrich von Martini, a Swiss engineer, and Alexander Henry, a Scottish gunsmith.
Produced at the Royal Small Arms Manufactory at Enfield,
the Martini Henry rifle became the standard-issue weapon for the British Army from 1871 until 1889
and was used in campaigns across the British Empire in Afghanistan, the Far East, Sudan and South Africa.
To fill in the gaps between the Brownbess and Martini Henry, we'd be relying on our expert.
Right, Jonathan, last time we came to this place, we fired a Brownbess musket
and then we sort of skipped ahead straight to the Lee-Enfield, the bolt-action,
and we left a pretty big gap, and our people in the comments section certainly reminded us of that fact.
But we have now, potentially, can we fill that gap in for the audience?
We can definitely fill in a fair bit of it, the important bits, I would say.
So the Brownbess musket kind of leaves active service for the main army, maybe in the 1820s, 1830s, is that about right?
Yeah, well the interesting thing is this term Brownbess, I've done some research into,
regardless of all the nerdy variations that we're going to look at and that I talk about and know about,
the general public, the soldiers, they all refer to Brownbess, they didn't care how it exactly worked,
it was a long gun that you shoved the ammunition in the front of, basically.
The key thing being smooth bore, really.
So Brownbess is used for everything from the thing you shot through the percussion era, the Patton 1842 musket,
and the critical thing is the introduction of the, on a global sense, the Minie rifle.
For the Brits, the main show there was the Patton 1853 Enfield,
the first Enfield rifle that people might be aware of.
It shows up in the American Civil War, it's pretty critical to firearms history.
I have one behind me.
Nice.
Okay, let's see it.
Ooh, lovely.
Nice.
So we have many like this, but this is an important one.
The important message here, this operates just like the old Brownbess musket,
the percussion version, but they were still calling Brownbess.
Lock, stock and barrel, very recognisable to the soldiers of the day.
Yes, okay, we've got the advanced percussion lock that we had on the last version of Brownbess,
but down the barrel are those spiral grooves.
Now back in the day, you would have to essentially jam the lead bullet into the grooves
so that it will be twisted, otherwise it's just going to rattle down the bore.
It has to fit to be spun, to be accurate, to be powerful.
We had a hard time doing that last time as well.
It's very tight.
It is.
There you go.
Come on.
I think he would have been shot by now.
Yeah, and that's with smooth bore.
So imagine now that you've got a super tight fit where the grooves are biting into the lead.
So what was the way around that?
That was to create a new form of bullet, shaped like a bullet rather than a ball,
with a hollow base, and the gas pressure of firing makes the bullet fit the rifle in.
So it goes down the muzzle like a musket ball, easily.
You ram it down with the rammer, just like you guys did,
but then when it blasts out, it's expanding to fit those grooves, if that makes sense.
And that doesn't sound like much, but it's revolutionary in terms of range,
well, velocity, and therefore range, accuracy, power at range.
That's the first step of opening up the battlefield and starting to move away,
just starting from the sort of old-fashioned close range linear tactics.
Suddenly we rattle through, new ignition system, new rifling system,
and then it's breech loading.
Breach loading, yeah.
Yes.
So you can't get anything in the back of this.
No.
Why would you want to?
Well, speed, for one.
It's quicker to just insert a made-up cartridge.
So instead of having your ignition sitting on this nipple,
that's in the back of the cartridge now, and you just shove the cartridge in.
But how do you do that?
So we're getting closer to the Martini Henry now, but not quite there yet.
That's right.
So the obvious thing to do there, to make it breech loading,
instead of a percussion hole, that's just a glorified touch hole at the end of the day,
this is not, this is a firing pin.
And the face of what used to be the, well, it's still a hammer,
but that's now, instead of crushing a copper cap to fire the gun,
it's hitting this plunger, and then inside, at the front end of the block,
it pokes out and hits the cap in the back of the cartridge,
just like a modern firearm.
And do you load one bullet at a time?
That's the limitation here, yeah.
We've moved to load it from the back, so greater rapidity of fire.
You can load prone.
So it's more convenient.
It allows the weapon to be more efficient as well in terms of powder burning and all of that.
Breach loading literally means you are popping the bullet in the back,
into a hole in the back of the gun.
Just like once more onto the breech, the hole in the wall,
it's the hole in the back of the barrel.
The speed of innovation during the mid-19th century was truly staggering,
with global powers like Britain, France, and Russia
involved in a near-constant arms race on land and sea.
Within a few decades of the Napoleonic Wars,
the British Army's standard-issue weapon had evolved from a heavy smoothbore musket
to a deadly rifle equipped with a new breach-loading ignition and rifling system.
Without further ado, it was time to bring out the weapon we had come to see.
Right, so this is the one we've all been waiting for.
This is everybody's favourite, I think.
So this is the true Mark I.
You can see the I on the body there.
We called it a body.
And you can see it's starting to look slightly more like a Lee-Enfield
rather than an old smoothbore musket, sort of in between.
You're right to say that, because this is a two-piece stock.
Once you've got a lot going on back here with the mechanism,
you have to move away from that old Brown-Bess-style one-piece stock.
But in other countries, we're looking at early bolt actions,
the Prussian Dreiser, the French Chassepot.
Britain looked at everything that was available, as countries often did,
and went, we're going to go our own way.
We're going to adapt another American patent, Peabody's patent,
and have a lever.
Push that lever down. You'll be doing that a bit later.
And that opens up that breach.
I've actually got here for you an example, inert, of an original round.
It's a little tired.
You can see how bumpy that looks.
That was made from foil brass early on,
well, for the service life of the rifle, I should say.
And we're going to see later on in the video what a bullet like this,
the damage that it can do to simulated flesh and bone in this case.
That's the plan, yep, depending on what we hit.
We haven't quite got the velocity of a modern rifle that is more consistent,
but we'll see what we can do with it.
And does this new sort of breach-loading system,
does it revolutionise warfare in a way?
Does it change the tactics on the battlefield?
Eventually, I think is the answer.
So what this does is open up even more the battlefield,
flatter shooting, longer range,
or alternatively a bit more precision within that range.
You have still got guys in red coats lining up and exchanging fire.
Interesting.
Yeah, but they have a bit more possibility to exploit the technology.
And we can see that if we look at the Boer War,
where these guys were still around in that calibre,
being used very capably by the Boers
against the guys with even more advanced rifles
who were still a little bit hidebound by their tactics.
The Martini-Henry rifle is still perhaps best known
for being the weapon used by British redcoats
during the Zulu Wars in southern Africa,
made famous by the film Zulu starring Sir Michael Caine
and in the Anglo-Boer War,
both costly campaigns for the British.
During the latter conflict,
the iconic rifle was actually outclassed
by the Mauser bolt-action rifle,
supplied in admittedly limited numbers
to the Boers by the German Empire.
Concerned with the superior performance of the Mauser,
which combined with guerrilla tactics
was inflicting heavy casualties,
the British sought ways to improve the Martini-Henry,
leading to all sorts of innovations,
some more successful than others.
One of the things that was tried...
So we already have, by the 1880s,
we have early magazine rifles.
The French Lebel pops up in 1886
and suddenly you've got eight rounds under the barrel,
a bit like a Winchester but bolt-action,
and various other things are going on.
So the Brits are going,
OK, right, we need to make the next leap forward.
Magazine rifles.
Rounds on the gun,
so you don't have to reach into the classic cartridge pouch.
Or, well, there's always a cartridge pouch, really.
And one experimental way of doing that,
and there were at least three versions submitted for trials,
this is the Haasten loader,
was to graft on a magazine.
So obviously this rifle was never designed to have a magazine.
It's very much open it, put one in, close it, shoot it.
That's exactly why, because it's bodged on, essentially.
So it actually...
slides on and off.
You have that loaded with five rounds.
And had this seen service in some alternate steampunk past,
I suspect they'd have been ordered to carry this
as a separate piece of kit.
But I can demonstrate for you,
you saw a little hint of it there.
When you pop it open,
you can load it singly if you want to,
but what it's doing is storing up the next round,
and then when you close it...
Feeds into the chamber.
That's pretty smart.
Round drops out, gets shoved in,
all in closing up the breech.
Not the prettiest weapon we've seen,
with the box kind of just wedged onto the side,
but that's pretty smart.
That shows that they were really thinking about it.
It's absolutely ingenious,
but it's bulky,
it's heavy, it's expensive,
it's vulnerable, fiddly,
it's vulnerable to damage as well.
There are other experiments to try to make this thing,
keep this thing relevant.
So this is, well, 1886 they managed to...
So pretty quickly.
So this one, well, I say 1886 in terms of,
yes, we're going to have it.
This one was made 1887.
And weirdly enough, that sort of looks
quite similar to the original.
They've gone back.
They've absolutely gone backwards.
They've got the reinforced receiver,
which is just better to have, because why not?
And the long lever,
which was part of the experimentation as well,
wasn't on that rifle.
Why would you want a long lever?
It's easier to open things with a long lever.
Think of trying to open a paint tin
with a pen knife versus a screwdriver.
Exactly the same thing.
It's way easier to open it.
After trying to upgrade
the standard model numerous times,
simplicity was preferable in the end.
And even as technology surged forward
at breakneck speed,
having the edge in hand-to-hand combat
was still crucial for regular infantrymen.
The Martini Henry bayonet
was referred to by soldiers as the Lunger
due to its exceptional length of 22 inches.
At the Battle of Rourke's Drift in 1879,
where a force of 150 British troops
defended a supply station
against an assault by 4,000 Zulu warriors,
bayonet charges led by Lieutenant Gonville Bromhead
were used to great effect,
on top of the 20,000 rounds reportedly fired.
OK, so Jonathan, understandably,
we're not going to be able to use the bayonets
for the Martini Henry today.
There's no meaningful way we can test them, really.
But can you tell us a little bit about them?
I mean, bayonets still in use today, really,
but what stage are we at here?
Yeah, so the bayonet today
is really a minor player on the battlefield.
I'd say the further you go back into history,
the more essential they become.
And it's because the push toward ever more firepower
from 30 rounds on your rifle today
back to 10 in an EN field,
back to, in this case, none.
You have one round in the chamber
and then you have to load from the pouch.
So apart from the tactical imperative for the bayonet,
that's still part of the doctrine.
You train to assault with the bayonet.
Even if it's just you versus the other guy,
you want that bayonet because you only have one shot.
You can hit people with a rifle,
but it's not very efficient at all.
A good old-fashioned bayonet is still the way to do it.
So can you show us how this bayonet attaches to the rifle?
Yeah, sure.
You can actually see that there are two fittings.
So this is for the alternative sword bayonet types,
one of which we just looked at.
And then the standard attachment is just like old Brown Bess,
only this time we have a nice, accurate iron sight on top of it.
And then we have our socket,
slips over the muzzle.
Try and show you that.
Over the front sight.
And then just like a...
There's a reason why it's called a bayonet light fitting.
Just like your light bulb, you turn and then push it on.
And the final step by this point in history
is that you can turn this locking ring
and there's absolutely no way this thing can come off now.
And you can get to work.
A truly terrifying prospect.
After Jonathan demonstrated the different ways
the bayonet could be used in anger,
it was time for us to see if the rifle could still be effective
in the hands of novices.
Louis was up first.
OK, Jonathan, so we've got the opportunity to fire this one
and we're going to be able to load it as well,
which is very cool.
Can you show me what I'm doing?
Yeah, if we step forward to the firing point,
you've got three rounds.
Take the rifle with us.
So if you take control, obviously both hands,
you'll notice the thumb rest there.
Make sure you put your thumb on there
when you're ready to shoot, of course.
So to load, you just put your thumb into that lever
below the action there and push down,
watching where the muzzle goes.
It does slip in the shoulder sometimes.
You take your first round,
insert that all the way into the chamber.
Push it in or is that fine?
All the way in.
OK.
Then close it up.
Yep.
So that's one round ready to go.
Pulling her in tight.
That is quite a kick.
Wow, that's a big boom.
Well, you haven't finished yet,
so thumb in the lever, give it some welly.
OK.
Some welly.
Once that's happened,
you just need to get that out of the way.
OK.
And then second shot, load.
All the way in, lever up.
Same point of aim.
Don't worry if it's going high.
Final round.
Shot.
Thank you.
Closing.
Click it in and then ready to go.
Same point of aim.
Good.
Yep.
And push down.
There you go.
It's all about technique.
I'll take that.
Thank you very much.
Oh, sweating.
Holy moly.
It sounds, from what I remember,
it almost sounds like a bigger kick than the musket.
About similar.
Comme ci, comme ça.
Yeah.
Right, OK.
Same again.
Same again, OK.
Well, I think it's fair to say
I wasn't exactly oozing confidence at this point.
Insert that cartridge all the way forward.
And then close it with a bit of authority.
Like that.
Finger on the trigger when you're ready to shoot,
i.e. when it's in the shoulder.
So you're on the bottom target.
Bottom target, OK.
I'm going to try and lean into this one.
Finger on the trigger.
Squeeze when you're ready.
Good.
Second round.
Push it in.
That's it, close it up.
Excellent.
That went in.
Same again.
We'll do everything exactly the same.
Good.
A little bit higher on that shot.
Last one.
See if you can split the difference.
Good.
Let's try and hit the target with this one.
Good.
There we go.
So final, I didn't quite get it clear there.
See the importance of giving it some...
Is that really hot at the moment?
Can you feel it?
OK.
Pretty warm, smoking, of course.
Perfect.
Click that back in.
Thank you very much, Jonathan.
You're welcome.
Time to assess our marksmanship at the target boards.
That was an absolute cannon, Jonathan.
It's a beast.
Yeah.
It's quite an experience.
OK.
So...
Oh, yeah.
Grouping's not...
Grouping's what matters.
Awful, isn't it?
Oh, it's the grouping that matters.
I keep forgetting that.
Jonathan, do you think our technique was better than last time?
I think you've picked up a few.
Yeah.
The more you do, the leaning into it a bit more.
I was impressed, yeah.
Oh, thanks.
Awesome.
Right, well, we're going to let you have the next shot.
OK.
And we're going to see what this thing does close up to simulated flesh and bone.
OK.
Very interesting.
Let's do it.
Today, we were using a gel block and a forensic simulated cortical bone
as a target to demonstrate the deadliness of the Martini Henry.
At, admittedly, very close range.
Someone could grab the bone.
Yep.
Wow.
OK.
Well, first of all, well done.
That was a great shot to get it bang through the metal, but...
Close range, but I'm glad I hit it nonetheless.
That came flying out as well, didn't it?
Yeah, and obviously, without more, dare I say, meat to retain it,
this broken bone is just ejected straight out the top.
So you can see the jagged edges there.
Yeah.
This is forensic simulated bone, sort of cortical bone.
And then very small entrance wound.
That's typical.
It stretches and relaxes, so that big .45-calibre bullet
has stretched its way into that hole and made a small entry wound.
It's going to bleed less.
But then inside is a chunky old wound track.
If you can capture it either from the side or the top,
you'll see the temporary stretch where it's stretching you apart
and then relaxing back down.
So you've got the crush of the bullet crushing through your tissue,
you've got the stretch of the tissue,
and then you've got the, if I turn it around, much bigger exit wound.
Wow.
Which is the size of a musket ball exit wound, pretty much.
The bullet will be going sideways when it comes out,
most likely we'll see on the high-speed footage.
And there are shards of bone in the wound track.
You can probably hear them.
Yeah, I can hear them.
That's just going to complicate.
Pretty grim.
I can't retrieve them, but you might be able to see.
And they will be distributed throughout the wound,
or at least from the bone aft, as it were.
Got to make healing.
Well, you're losing that limb.
Yeah.
With that level of bone damage, it's just going to have to come off.
And you've got more of these bullets going off all the time because you load it quicker.
Oh, yeah.
Don't forget, most of the use of this is still en masse,
so you've still got them zipping through the air at you.
You're going to get hit by potentially more than one.
It's pretty brutal.
So that shape there, that's how much you are stretching at the maximum.
That collapses back down, but some damage is done.
And if that hits your liver, anything, obviously your head, that's game over,
but anything that has a lot of water in it,
it cannot relax back down and save that tissue.
That tissue is destroyed.
To be honest, the thing that surprises me is the size of this wound.
It's such a large bullet.
We saw the size of that shell, and it's really kind of sucked in almost, hasn't it?
Do you get that with most sort of bullets, that it's the exit wound that's really devastating?
Always, nearly always.
There are some forensic exceptions, but, yeah, exit wound is always bigger.
This obsession in Hollywood with, must get the bullet out.
Well, first of all, it probably won't be in there,
and if it is in there, that's good times,
because you haven't got a gaping exit wound to worry about.
You've only got the entrance wound to dress.
Bullets, less of a concern.
There were guys rocking around in the 1910s, very, very old,
from the American Civil War, still with bullets in them, absolutely fine.
So forget about all that.
It's about stopping the blood loss and then saving as much tissue as you can.
We hope you enjoyed our deep dive into the history of the Martini Henry rifle.
Do make sure to check out our other firearms challenges, which are up on the screen now.