#corsetmaking#sewing#fantasyinspired I want to morph into a ~fantasy girlie~ and this is the first step! While shopping at Home Depot I noticed that a drop cloth was very cheap and it would probably be sturdy enough to make a corset out of. So I bought it and the rest is this video, enjoy!
__________________________________ Find me! Instagram: / karen.clement Website: karenclement.ca Business Inquiries: [email protected] __________________________________ Chapters: 00:00 Intro 00:55 Prep the Pattern and Cut Fabric 04:05 Sew the Pieces 06:28 Add Bias Tape 07:36 Add Zip Tie Boning 09:01 Finishing Details 12:30 The Reveal and Outro __________________________________ PLEASE BE SAFE! Please note that I am not a professional! All DIY projects attempted from my channel are completed at your own risk. I am not liable for any harm, damage, or injury that may occur. __________________________________ Additional Footage Attribution: Loading Circle Animation by King God on Vecteezy.com
All right, before I get into today's video,
I just wanted to show off my latest fabric haul
from my favorite fabric store.
Oh, are you guys not buying all of your fabric
from the Home Depot?
Like many people on the internet,
have fallen very far down the like,
renaissance fair, fantasy, whimsical clothing rabbit hole.
And all I want in my life right now
is a beautiful handmade corset.
However, they are very expensive, and I get it.
They're a lot of work, they take a lot of time,
they are very finicky pieces of clothing
because you want them to fit perfectly.
So this week, instead of paying hundreds and hundreds
of dollars for a perfect corset,
I'm gonna take my amateur sewing skills
and my very strong delusions,
put them together and try to make
what's hopefully a very nice corset
out of a bunch of zip ties
and a canvas drop cloth from Home Depot.
What could go wrong?
I have some very basic knowledge of sewing.
I have made like napkins in the past
and can sew a straight stitch.
I've followed a pattern one time
and it came out with very mediocre results.
So I definitely feel qualified
to tackle this project this week.
What I have purchased for this endeavor
is a four foot by 15 foot drop cloth.
This entire thing was less than 20 Canadian dollars.
If you're in the States, that's like 15.
With this and some very large zip ties for boning,
I'm gonna attempt to make a corset
based off a pattern from corsetpatternmaker.com.
Basically what you do is you put in
a couple of your measurements
and it spits out a free,
customized to your body corset pattern.
Is this delusional?
100%.
Am I stalling by continuing to talk?
Also 100%.
I'm gonna cut a chunk out of this.
I don't need to wash all 15 feet.
That'd be crazy.
I'm gonna cut a big piece of this
that I guesstimate is about enough for this corset,
throw it in my washing machine,
and print out the pattern.
I don't know.
What I understand of patterns that you print out,
you have to tape them all together
and then you cut around the lines.
In theory, easy enough.
Did that fabric really scare you?
And then I fear I am missing a piece.
Next, we cut.
Hey.
Piece number one.
Piece number two.
Piece number three.
Okay, our fabric is all washed.
It is honestly pretty flat.
I don't think I need to even iron it,
which is excellent.
Saves me a step.
And now it's time to cut everything out.
The beauty of using this cheap canvas fabric
is that I'm not so worried about messing it up
because I have lots left over.
Think I only need two pieces of each pattern piece.
So, let's see how this goes.
So, my mic was off for most of that.
Excellent.
To recap what I said.
Yesterday, didn't get a whole lot done.
That's because I went on a side quest
to try to make bias tape,
which I have no right trying to make.
I can barely sew a straight line.
Who did I think I was making bias tape
out of scrap, like super slippery fabric?
Instead, I bought some bias tape.
So, that'll be here today or tomorrow, hopefully.
I went ahead and pinned all of my pieces together
so we can just get started sewing them.
And that's where we're at right now.
So, a lot of today was just stitching
all of my pieces together,
making sure that everything was connected properly.
Plus sides, I don't think that this fabric
really has a right or a wrong side.
The one thing I did have to watch out for
was it did fray quite a bit on the edges
just because it's a cheap canvas fabric.
So, I did a little zigzag stitch to try to mitigate that.
And also, this is proof I tried to be a good sewer
and I did, in fact, iron all of my pieces
into my seams to lay flat.
Please admire just how little thread is left.
This is all I have left of this cream color.
We cut it so close.
Next, I followed the pattern
and just marked off where all the boning channels
were supposed to sit.
I started out by pinning everything
and realized that wasn't gonna go
through my machine very well.
So, I just started eyeballing it.
I really need to invest in a washable marker.
Using the contrasting black thread,
we just continued to sew and sew
all of these boning channels,
making sure that they fit the zip ties as I went along.
Later that night, my bias tape had finally arrived
and I was able to begin the very slow process
of pinning it meticulously around the edges
and sewing it down.
But as you can see here,
I was very encouraged by the clean finish
I was actually able to get
with just a little bit of patience.
In theory, the bias tape will help this garment last longer
because it helps with the fraying edges.
We'll see as I wear it if that actually is true or not.
This process took a really long time
because there's actually a lot of edges
that needed finishing,
even though this corset is pretty small.
So, I turned on an audio book and just kept working away.
Next, I added in all the zip ties.
I made sure to push them in,
measure them with a Sharpie,
trim the edges, and then round off the corners
so they didn't stab me once the garment was done.
And then we just kept adding in boning.
Once all the boning was in,
we did our last piece of bias tape along the bottom.
When I was attaching the bias tape to the sewing machine,
I was very careful not to hit any of the zip ties
because I would probably have broken my machine doing that.
This is where we're at now.
This is what it looks like on.
Please, hey, hey.
It's all boned, it's all lined.
All the edges are finished.
My wonderful husband told me this morning
that I looked like a child
who's playing sports in middle school wearing a pinnie,
and he's not wrong about it,
but hopefully the next step will fix that problem.
I need to put grommets in these sides
so I can actually lace it up and make it fitted to my body.
We do have some options for colors
that I wanna figure out before I commit
to cutting holes in this.
So, the kit I bought comes with four colors.
We have bright gold and silver.
Which I immediately think are gonna be a no.
I don't love how these look.
The two that I'm going between are,
there's this black gunmetal dark gray color,
which I think is really pretty with the dark lining.
But the one I'm leaning towards the most
is this aged brass look.
I think my gut instinct is telling me
to go with this brassy color.
I should really measure these.
I don't wanna measure them.
What if I just say I get them close enough?
Because what are the odds that I'm gonna be able
to actually punch these holes accurately
and put these on perfectly?
So maybe we just accept good enough in this moment.
We've committed.
We're just gonna eyeball it
and it's gonna be good enough for us.
So, I'm gonna go ahead and put these on.
I'm gonna use our old friend, the X-Acto knife,
and an awl, just to punch the holes out in here,
and then we'll go outside
and hammer all of the grommets in place.
And then that slides at the top.
I just finished the grommets.
We have one last step to do.
I just took a little bit of straightener
to measure out how long I want the laces.
I'm gonna make them pretty generous in length
so that I have lots of room to play.
Also, I can do interesting lacing techniques,
have a nice big bow at the bottom.
But we're just gonna measure out two pieces of bias tape
that's the same length as this,
stitch this edge closed,
and then we have a finished garment.
Do we see this?
Do we see how professional this looks?
I am like thoroughly impressed with myself,
I'm not gonna lie.
When I set out to make a corset
with basically no garment sewing experience,
I was like, I'm crazy, this is gonna be the one that fails.
But like, look at how nice she looks.
This truly is a testament to this pattern.
Like, without a doubt,
this pattern is 10 out of 10, would recommend.
There's a couple little things I would tweak
if I did this again.
Some of the seaming is like a little bit janky.
There's one little spot that's a little bit wonky
with the bias tape, but like, you don't really see it,
so that's totally fine.
I also definitely would measure the shoulders properly.
I kinda just YOLOed it when I did it myself.
But that's on me for not following instructions,
that's not on the pattern, that's fully on me.
I also really enjoy that this corset can be dressed
like a little more fantasy,
like I did in some of the reveal clips,
or also a little more casual.
It's super comfortable.
The canvas breathes surprisingly well.
I put this on to try it after I finished it yesterday,
and fully had a nap, so take that for what you will.
The Home Depot canvas is a steal, let me tell ya.
I have so much leftover fabric from what I bought.
I could make so many corsets.
I already wanna do a front-lacing one.
If I can do this, literally anybody can do this
if you have a machine.
Like, if you can sew a straight stitch,
you can probably do this corset,
because I was able to do this corset,
and it's so good, it's so good.
Let me know in the comments below
if you have other ideas for corsets in the future,
because I am almost 100% gonna make more.
If you enjoyed hanging out, make sure you subscribe,
so you know when my next video goes live,
and with that, I'll see you guys next time.