Making ceramic pendants lights for my kitchen!

History culture hero
16 followers
2 Video Views·Jun 3, 2025
Hey friends, my name is Lisa. If we haven't met, if we have, welcome back to my pottery studio. I'm very glad you're here today.
The objective today is to remedy a failed attempt at making some pendant lights.
So a few videos back I threw some bowls that I'm planning on turning into pendant lights and when I trimmed them
I trimmed the hole in the bottom just like that so that the light mechanism could go through and then I, well two things happened.
One, I threw two. One of them cracked in trimming. The second one cracked at the bisque and I got to thinking about it
and I realized my approach was actually pretty dumb.
So I threw a bowl like it threw like this, right?
And then I, when trimming I was, I trimmed the hole out for the light mechanism to go through and I now thinking back on it
that was probably dumb.
I should have thrown it with the hole in the bottom to begin with but that leads to a whole debacle about how do I
get the right size given that there will be the shrinkage and all that and then I had a brilliant idea and I think I
can solve this and I get to use some new technology that I recently got. So you want to see my new plan
please stick around. I hope that sounds interesting to you and let's get started.
Okay, I should say before we get started here
I do need to do a little cleanup in the studio and
one of the things that I want to do I need to do before I can do the thing for the, sorry for all that.
I am going to use my 3D printer for this project. The thing is I got a 3D printer a while back
I just put it on this countertop and I like having this countertop for putting like finished pieces on and so last weekend
I worked on building a little stand table situation over here for it and the top for that
I finally got finished and painted. So I'm going to install this and move the 3D printer over.
Then my plan is to use ChatGPT to identify how big of a disk as like a template
I would need for this specific light fixture that I've got given the shrinkage of my clay and then I'm gonna use my printer to
print that out as a template. Then I'm gonna throw my bowls and when they're just about done, but not complete yet
I'm going to put that template in the bottom
I'm gonna try and have it centered and then cut the clay out based on that size and diameter
while it's still wet. Lisa Brain is thinking I'll be less likely to have it crack like it did.
I won't have to deal with trimming that hole out which is also puts less risk into the whole process
So I think it's brilliant and I get to play with my 3D printer. So let's go
Let's get this cleaned up first and then we can go. So fortunately last weekend
I was able to kind of design and build this little setup all with scrap pieces. I actually already had pretty remarkable
That like a glove. What do we think here? Can I lift this as is?
Yeah, I can do it, okay, it's not too bad actually not as heavy as you might think that it is
But I do want to make sure it's unplugged
That's cord in the way
New home
We have a new home right here
Okay, I'm glad I got that moved that gives me that counter space back and then we can start this print
But got a design at first. Here's what I'm thinking
So I picked this up at Lowe's I think they have a whole area where you can buy all these different
Pendants and then you can choose the actual like glass part
I think most of them are all glass, but obviously I want to use what I'm making instead
So this is one of the tests that I did that didn't crack when it trimmed
But you can see oddly enough it cracked on the outside, but it did not go all the way through the inside
But I'm just I'm probably gonna toss this out, but I'm gonna maybe use it as like kind of a reference for now
Okay, so there's it looks like okay, there's two sort of collets, I guess
Okay, and according to this it looks like this would go
Look at that. I mean I almost nailed it. I mean just I whatever I did then it would say this
Well, I'll be damned
There's no way I expected this to just work like look at that look at that, I mean obviously this would all be like
Hanging but shoot if only you hadn't have cracked, but this isn't like fully fired yet, so it would shrink again
So there's actually a good chance that this would still be how ironic that it worked. This is just bisque
There's also a good chance that this would shrink again and shrink more and then I wouldn't be able to actually get
This through either way, I only have one of these I need to I was also kind of thinking that maybe I make them a
Little bit more like undulating maybe a little bit more organic looking like this just looks like this looks like anything
You could just go by so what's the point in that? Let's do some
Calculated measurements what I'm going to do is I've got these
calipers digital calipers
And I'm going to see like how wide does my hole need to be upon
Completion to fit in here, and I don't want it to be too tight
So it looks like I could go about exactly 40. You know what I'm gonna use my brain this hole is
perfect as is so upon
final firing
40 to 43 millimeters, I think would work
Okay, so the next step I'm gonna use chat GPT if I have a disc flat disc that is
41 millimeters
After it had shrank by
12% what would be the original diameter of that disc?
Awesome, okay, so it says to find the original diameter of the disc before it shrank by 14% you can use this formula
But given the final shrunk diameters 41 millimeters shrinkage rate of 14%
Da-da-da-da-da-da the original diameter was approximately
47.67
Millimeters, so I just need to go upstairs and model a small disc. That's
47.67 millimeters and get that printing okay, all right
That was a little bit more involved than what I thought I had to like calculate the radius because that's what you put in when
You model it, and then I forgot to do the little finger hole to center it
So I had to go back and do that, but I think I got it. It's sending
I hear the printer starting right now. It's warming up
So and the cool thing too is I can I can monitor it on my phone which helps a lot
I think that this says it's gonna take all of seven minutes to print that little tool
So while we're waiting for that, I'm gonna go ahead and get some clay ready
There is a life I lead in this city
Hurrying to cut my teeth. I can take what I need to get by
Doesn't make it easy
The other piece of my heart
Well in less than 10 minutes
I got two balls of clay wedged up and my little jig has finished printing should be the exact
Diameter that I need if we did all of our maths, right?
Put you back in here for the next
Definitely like the new home for this but
So I've got
Pretty well set up here
You're wondering why I use two buckets I have a whole video about that
It's just a preference
You just make sure I have everything this plaster bat that I like to scrape wet clay on to
Makes it easier to reclaim. I've got my new little jig
I did measure it with the same calipers just to make sure all good. I got my shammy
I got my cutoff where I've got the sponge and I've got my clay. All right
Check check check
All right, big money big money. No whammies
Don't know if I mentioned but today I'm throwing with a different clay body than I normally do this is Rocky Mountain Aspen
It's my Rocky Mountain clay and it's a porcelain called Aspen. Oh and every single time I kid you not
this bats rattling don't know if it's just my bats that do this, but I
have some older bats I think and they just
Lost a little bit of their
Mojo, so I use this little bat mate. I love this thing
I use this also on plaster bats all the time with these like MDF bats. They start like really
You know like that bat mate will really help a lot of whack there
Together take me back
Anyway, what was I saying? So
Yeah, this is another cone six porcelain
It's made here in Colorado. I normally throw with Laguna's number 16 porcelain, but my
Supplier didn't have any when I went down, but it's okay. This is also a lovely body
I did have to look it up and confirm it also shrinks this shrinks at 14%
So I did change my calculation just FYI to 14% shrinkage
So before opening
I'm at I have all about five inches
So I'm just making a note of that so when I throw the next one, you know
I'll Center it down to a cone shape like this about five inches at the bottom
I
Could take you back to my
Show you what I wish
My will is strong with the place to me
In the moment, I hung this
The other ring on my wrist is
Pairing with the light
My other thought is if I make them kind of like
Undulating or sort of you know, like not perfect then they don't have to like perfectly match either. So a little cheat
It does mean though if I modify it then trimming
Trimming is gonna be harder
Let's see. Let's see where we're at. Let's try to get
Walls evened out as much as we can
We are measuring about 10 inches
Diameter
I'm gonna clean up the wall and then we're gonna test the jig
The disc the measurement device and y'all are gonna cross your fingers for me
Huh
That went better than expected. Okay, I'm gonna just push it down
Okay, and now
We'll use
Hold your breath
Okay, I think it worked. I mean, I
Think that's pretty awesome. Let's see
I guess I shouldn't have pushed it on there that hard, huh? Okay, it really like it really really stuck to the clay
So that's fine. That's fine. What I think I'm gonna do is see if I can clean this up a little bit
okay, so what I think would have worked better is if I just put the template down lightly and
Then created my line my guide and then took it off and did this but I'm pretty sure this is still gonna be great
Now for the undulating the desire to undulate it
What I think so
I'm not gonna cut it off from the bat and I'm gonna hope that if I flip it upside down and shake it that it'll
Create some subtle subtle interest. I want to still be able to flip it over and trim it
So I don't want to do too much of that
Okay, I want to use
so
Okay, I'm gonna like this, all right, I'll hang it upside down I'll set it here
I'll put the other one over it like that and it can rest like that. We're gonna work work, but we don't know is if
It's actually gonna be like oh, oh it did it worked. Look at that. Yeah. Okay. Can you get more consistent? Yes. I
Don't know. Can you tell this is exactly kind of what I was hoping for. I don't want to touch it. I want it to be
Sort of happenstance
Yes
These are gonna be cool. They're gonna be a bugger to trim. We are gonna say that I'll do like so and
Like so now obviously we don't want it to dry or too long like this. I've got look you guys gotta see this
That makes me so happy
That was exactly what I was hoping for
All right, I just gonna do one more and you see what I'm saying, like if I don't get them perfectly like consistent
Do you know there's it's still gonna look cool
I should do three because then I have one backup in case
There's another kiln crack that shows up should have thought of that when I was wedging though
Now obviously you don't have to have a 3d printer to do this, right?
I
Will say that chat GPT that came in clutch for the geometry
But you could do the same thing and then just you know
Cut a circle out with like cardboard or something. But now that I have a 3d printer
I want to use it for all the things I do plan on doing a video coming up
Hopefully maybe the next month or so on just all the fun pottery tools that you can make for yourself with a printer
And if you have a 3d printer
Put a comment below and let me know and tell me like, you know
If you have any tips or what your favorite filament is
In other news
On the home front. So I have a I have a five-year-old yellow lab named Ellie. She's not really a studio dog
She doesn't like it down here. I wish she would
Come hang out with me, but she doesn't she had to go to the ophthalmologist yesterday
Because one of her eyes was looking a little cloudy a little worried about it
I thought maybe she had scratched her eye out running through the shrubbery and stuff in the back
But it turns out she has an eye condition. I want to say I called it pana
It's a condition where it gets more aggravated and kind of damaging to her
I the more she's exposed to UV light and she likes she loves to be outside. She loves it
So they presented us with the option of
doggles
We got some they're called Rex specs and
Oh, she's such a champ
But just the cutest thing ever and what's hysterical is that like in the winter time if it's too cold
I make her wear booties in the summertime. If it's too hot. I make her wear booties and now she's got her glasses
She's surprisingly tolerant of it though. She's of course, you know, she'll take a few steps
On the walk and then try to palm off but when you correct her she stops
And so I think we're gonna have a good go of it
My home
I look for the things. I don't know
I stand alone
Show me where the Indian goes
I should be the last
Show
See the other thing I've been really working on a lot kind of behind the scenes is this
Glazed database that I have created and next video. I plan to record after this video. I'm gonna give you a tour of it
It's online. It's my new favorite tool
Any favorite pottery tool that's not in the pottery studio
I'm mr. Q for the engine. I guess you always seem to know
I push back the serious
To get back
And this I stand alone show me where the engine
Honestly, I should be the last
Show me where the engine
Another tip if you are if you buy
Furniture that's like delivered and it has these like cardboard corners on it that like protect it
I use these surprisingly a lot in the studio like surprisingly a lot
I definitely use them all the time when I'm making test tiles for glazes and someday. I will definitely make a video on that process
They're also coming in pretty handy for this right now
So once again and hold your breath with me
I'm very very sad
That's not supposed to happen
Okay, well it happened it happened
Which makes me think this one. Let's go ahead and get it right side back up and hope that
it will
Not collapse this way
This one's still good
safe safer
That worked, I mean that that was good I
Don't think I don't think this is quite the level of
Alteration that I was going for so shoot. It appears as though the bat was still a little bit too dry
The next one I'm gonna use a plastic bat not an MDF bat
but since I have to do that I am gonna wedge up two more balls and so my goal would be to have three and
That's smarter because you know, just in case one cracks. So I'm gonna take a break though. I might cry for a little bit
But I'm gonna come back and it's gonna be fine
There is a life I lead in this city
Hurrying to cut my teeth. I can take what I need to get by
Doesn't make it easy
The other piece of my heart moves slow
Somewhere in the greater unknown
When I return from the afterglow
Will you carry me like I am whole again
Wait, put me together take me back where I belong
I want it all
And it's all gone
Wait, put me together
Take me back where I belong
I want it all
Had a feeling
But the feeling is all gone
And it's all gone
If I could take you back to my youth
And show you what I wish I knew
My will is strong with a place to leave
In the moment I hung desperately
The other ring on my wrist is gold
Pairing with the life it holds
When I return from my spinning ball
Okay, well I spent a little bit of time just hanging out in the studio watching these babies and watching some YouTube to give
Them enough time to stiffen up
Enough so that I flipped him back over and they didn't just like, you know
Settle down too much. I did give him a little bit more encouragement to get some good character
Because I'm quite confident that as these dry and as I put plastic over it, they're gonna relax
And so this might seem a little bit more undulating than you might expect
But I am pretty confident that once they settle they're gonna kind of relax a little bit
So I think this is where I'm gonna leave you for today
It means the world to me that you'd stay and hang out with me. So I really appreciate you being here
I very much promise that on an upcoming video
I will highlight and show how these come out and I'll probably do a whole video on like installing them as long as I have
Again, this is my second second attempt. So
Wish me luck cross your fingers for me. I will keep you posted, but it means the world that you're here
Thank you so much, and I'll see you on the next video. Bye guys
