Beginner friendly! In this sketchbook painting tutorial, I show you how to paint realistic landscapes on paper with acrylic on paper. I'll walk you through, step by step, how to create a realistic landscape in your sketchbook using acrylic on paper, and the best part is that you only need four colours. In this video we'll cover preparing your paper for painting, mixing colours and tones, how to paint mist, basic landscape painting rules, and detail work. Enjoy this video in full 4K!
To download my reference photos, please visit this link: https://mariannevanderdussen.myflodesk.com/m963djkwkt These reference photos are COPYRIGHT FREE and you may do with them what you'd like! Keep them, sell them, make prints of your paintings, just have fun!
For mixing colours, treat the burnt umber like a red in your palette. So if your colours are coming out too green, tone them back with the burnt umber. Remember that you can use complementary opposites to tone colours, not just greys. Green tones red, yellow tones purple, and orange tones blue (and vice versa).
I am using Liquitex Professionals acrylic paint, but you can use whatever brand you'd like. I don't usually use any medium when I am painting in sketchbooks.
For tape, I am using both the purple Scotch delicate brand and the yellow Frog delicate strength tape. The reason I am using two is because I actually prefer the Scotch as it seems to leave cleaner lines, but I like the yellow because it allows me the width to tape the whole book closed, which helps prevent buckling.
Here are specific products that I used in this video: Sketchbook: https://geni.us/strathmorewatercolor (Amazon) Artist Butcher's Tray: https://geni.us/artbutchertray (Amazon) Acrylic Paint: https://geni.us/liquitexstarterset (Amazon) - note, this is a starter set. This is a great way to get your feet wet with acrylic paints, but for actual colors in this video, I used burnt umber, ultramarine blue, titanium white, and a hint of cadmium yellow light. You can just buy the individual tubes for this, but if you're looking for a nice set, I do like the colours and items included in this.
Video Chapters: 00:00 Introduction 00:23 Getting Started: Priming your Pages with Gesso and Taping 02:03 Mixing Colours with a Limited Palette: How to Create Tones 02:57 Beginning the Painting 05:01 Painting Water: How to Blend Between Two Colours 06:27 Second Layer 09:28 Second Painting - Closeup of the Marsh Grass 11:48 Final Reveal
Hi there and welcome back to my channel. My name is Marianne and in this tutorial I will be walking
you through how to paint these beautiful misty marsh scenes in acrylic paint using only four
colors. I absolutely love painting in sketchbooks and know you will too and if you'd like to follow
along I've made my reference photos available as a free download through the link in the
description below. Let's get started. To paint along with me you'll need a limited palette of
titanium white, burnt umber, cadmium yellow light and ultramarine blue. I like to set my paints on
a wet palette which I make by adding two or three layers of paper towel to an artist butcher's tray
before dampening the paper towel with water and laying a piece of wax paper on top.
This keeps my paints workable for hours. To start the painting tape off the edges of your sketchbook
using a delicate strength painter's tape. This can be peeled off easily and creates a nice crisp
border while preventing the pages from buckling. For my sketchbook I'm using the Strathmore 400
series watercolor book which has cold press paper and can handle the heavy weight of acrylics.
I'm also a big fan of the Stillman & Byrne Zeta series which has heavyweight hot press paper and
a smoother texture. Once the pages are completely taped up I like to use gesso as a primer as I find
it helps to slow the absorption of the paint by the paper. Squirt it all over the page and spread
it out with a foam brush, careful not to leave any ridges as they'll remain visible even under the
painting. I visited this marsh back in the early winter and was completely stunned by the mist
that left frost on the tips of the marsh grass and knew I just had to paint it. Once the gesso is
fully dry I like to give it a quick sanding. I do this on all of my canvases as well as paper
to smooth out any grittiness. This allows your brushes to glide. Now I'd like to let you in on
my secret to mixing colors. I like to use tones as the basis of all my color mixing. Tones are grays
ranging from light to dark which I mix by using a combination of burnt umber, ultramarine blue,
and titanium white. Burnt umber has a reddish orangey base so if you use more burnt umber
than ultramarine you wind up with warm purplish tones. If you use more ultramarine you wind up
with cooler blue based grays. From here we can use color theory to help us figure out how to mix the
colors we'll need for this wintry scene. When you look at the sky in the reference photo it has
almost a greenish undertone to it so we'll add some yellow into this mixture. Not much, just enough
to tint the tone that we've mixed. If your tone is too green add some burnt umber. If it's too red
add more yellow and blue. If it's too dark add more titanium white. Now it's time to get painting.
For my horizon line I like to measure it out using tape, a mechanical pencil, and a ruler to ensure
that I can blend and swirl in my sky without losing that very important line. Next let's add
in that beautiful gray green sky tone we mixed on our palettes where we see it in the reference photo.
To create the effect of a misty background mix a tone that is only ever so slightly darker than
the sky and dab that in. A general rule for landscapes is that the farther away something is
the less contrast it has and the more bluish gray it appears. The closer an object is the more
contrast you see and it's generally warmer. So while I'm layering in these trees I'm mindful of
the fact that my eye will pick up on the subtle difference between the sky and background and I
use colors that are barely different from each other to create the effect of mist. I also use a
technique called dry brushing where you use very little paint and scuff and swirl it over previous
layers to create a foggy effect. Next we'll add in some hints of color to the trees in the left
background. All you need to do is add a little more yellow to your gray tone to make it seem more
golden and a little more blue and yellow to create green. Look at how these little changes of color
when added to the tone create this lovely soft effect. Before we add in the water let's roughly
sketch in the lines of the marsh grass. I like to use a lighter color to do this a burnt umber tone
with a paler value that would be easier to cover up if I make a mistake. Remember that this is just
a sketch and even if your marsh grass lines don't match the reference photo exactly that's perfectly
okay. When doing a smooth blend with acrylic I like to use two brushes and pre-mix my colors in
advance. I'm using two large filbert brushes in this case. Once I have my two colors mixed a lighter
value and a darker one I layer them both in and allow them to dry fully. I don't worry about
blending them at this stage and just get them onto the page. Once they're fully dry you can go ahead
and blend between the two colors switching between brushes as opposed to between colors to achieve a
nice smooth blend. Full disclosure I realized after I put the water in that I had made the color a bit
too blue so you're going to see me do a correction shortly. Once the water is fully dry you can
eliminate the remaining white paper on your page by adding in a dark base to build your next layer
on. The grass in the bottom left is a darker warmer brown and the grass a little further away is toned
to be paler suggesting some distance. I also add in a few shadows that I can see in the reference photo
to create depth in subsequent layers. Here's that color correction I was talking about. To reduce the
blue I mix the two colors again this time with a slightly greenish undertone that really reflected
the colors in the sky. I was so much happier with this blend and it really pulled the whole painting
together. From there it's second layer time which is my favorite because we get to add in the details.
I start by measuring the tree in the distance to ensure that the reflection is equal in height
and mark that in with my mechanical pencil.
Then I dab in the reflection again using a soft tone which implies mist.
Now let's work from back to front using very soft brushwork with loose strokes to start
which when combined with a toned back color creates the perception of depth. Softly scuff in
the shadows and the misty highlights looking at shapes as opposed to creating individual pieces
of grass. Keep building slowly and softly until you come to the mid-ground and can finally pull
out the detail brushes. The danger here of course is getting too detailed too quickly. Even though
you're starting to suggest individual blades of grass try squinting at your reference photo to
keep your brushwork impressionist. You'll notice that sometimes I wipe away errors with a damp
q-tip. As long as the paint isn't fully dry but the paint underneath is you can use a wet q-tip
as an eraser. I'll admit to being a little stumped for how to approach the grass in the foreground
but this is why I love sketchbooks because I get the opportunity to practice and experiment.
I knew I wanted to work from dark to light so I first added in a scratchy layer of burnt umber.
I also worked in the shadow in the water from the grass and some lily pads both in the foreground
and the background. From there I just kind of made it up as I went along. I would squint at
my reference photo to try and figure out where colors were clustered as opposed to worrying about
every individual blade of grass and slowly as the burnt umber was covered up this haphazard
approach seemed to be working. Just keep chopping in variations of color using yellows greens and
browns to break up the monotony of the undertone. To finish up the piece I marked areas that I
wanted to adjust or finish with a small piece of green painter's tape which helps me keep track of
areas that need a little love. I adjusted both the grass and the lily pads and added the reflection
in on the mid-ground grass. A little tip that I use to help make my reflections pop is to add a thin
line where the water meets the grass. Even though you don't see this in the reference photo it helps
the viewer understand the separation between object and water. I was thrilled with how this
painting turned out but let's keep going with the second painting showing a close-up of the marsh
grass. I'm going to take this file folder that I've cut in half and place it over the painting
that I've just finished to protect it while I'm working. The process for creating the second
painting is almost identical to the first starting with the sky and blocking in rough shapes for the
tree line. The trees are roughly blotted in with the tallest trees in the distance receiving the
I make them lighter and rougher than they appear in the reference photo. When you're working with
a photo it's important to remember that the camera captures details that aren't visible
with the human eye so you can soften the background and still maintain a realistic effect.
When it's time to block in the marsh grass I like to use a light warm tone to place my
grasses where I want them since it's easier to cover them up if I make a mistake.
Even though my composition is pretty close to the original photograph
don't feel like you have to include every single piece of grass that you can see in the image.
Just because it's in the photo does not mean that you have to include it in the painting.
To help pop the grass we're going to add in some contrast with a dark
warm tone and break that up with some ultramarine based greys to suggest the snow.
I found that it was helpful for me to roughly dab in these colors where I saw them fall in the photo
as opposed to trying to capture each and every individual tuft of grass or cluster of snow.
To finish up our paintings let's brighten up these lines with a pretty golden base tone.
I mix this using my regular grey tone but I warmed it up with a bit more yellow and burnt umber.
Then it's time to take the tape off and see how they look together as a set.
And there you have it the completed spread! Thank you so much for following along with this
tutorial and if you have any questions please don't hesitate to write me a comment below.
You can follow me on all social networks and tag me in any artwork that you'd like me to look at
especially paintings inspired by my videos. You can also join my free Facebook art incubator
support group through the link in the description below.
Keep making your life beautiful and I'll see you in the next video!