FMS F-18 V2 Gray 64mm EDF Jet

Flap Fliers
1 follower
May 30, 2025
Another old video hope it helps someone interested in getting one of these.
Got the 64, Version 2, DF-18, here's the box, oh, a lot more information on the back.
Alright, when you open it, I'll just cut the tape away to give you a quicker look than
looking at me do it.
Um, it's very loosely fit in here.
I'm going to support that on the side.
And then you got a bunch of random, you got your book, and a bunch of random cut pieces
of the foam.
This is kind of folded up, let's see if something's in here.
No.
This was folded up a little bit to stop it from rubbing against stuff.
Um, so that's all your ordinance.
That's cool.
We got a big Amram Sparrow type mural in this one.
Oh, there's the sidewinders.
Uh, got your tail.
Everything is just loose in here.
Crazy, but I guess the foam packed it in tight enough, I don't see any damage.
So, so far so good.
I'm being delicate with it because I don't want to have scratches on the pretty ring.
Alright, something's in here.
Get this extra foam out.
The wing.
Put this back down.
Alright, there's a spar.
Be the wing, main wing.
Spar.
Sounds like carbon.
Alright.
Oh, and we got two big ol' drop tanks.
These kind of look like they could be missiles.
I mean, missiles.
Bombs, but because drop tanks don't necessarily usually have these little conical fins, or
there's different types of fins on real bombs.
But anyway, so that's all of that.
Let's see what we got in this little cubby in the front.
Some wadded up stuffy.
And, okay.
The wheels.
The wheel covers, and looks like a push rod for something.
One of the control surfaces, a nose cone.
Definitely a necessity.
Kind of weird.
Nose cone, not what I'm used to.
And the hatch.
Cool.
Looks like this is definitely going to be a gluing event.
Let's see if I can see down here.
Yeah, the duck.
One single fan.
Whoa.
Alright.
I thought this was noteworthy.
I flipped this over, and I was like, man, this is so familiar.
So, that's your underbelly.
Now, look at this F-15.
Crazy.
Same little vents.
Go all the way up the belly, all the way up the belly.
Now, the intakes are different, obviously, with the 15 versus the 18.
But so many similarities, just the way these two wires come across.
They're there, but they're under a piece of tape on this one.
So much.
The way this lug is, it's the exact same lug that this thing had.
These are the same jet, even though one is E-Flight and one is FMF.
They are the same.
The length is the same.
Virtually, the nose cone on the E-Flight is a magnetized deal, whereas this one isn't.
But everything else is so similar.
The nose gear, look at that.
The cones.
Maybe not exactly the same on the cones, but you get the picture of what I'm saying.
So, the first step is to put the spar through the wing.
And then there's these tabs with metal reciprocals.
You slide the wing on, which I've already done.
I got one screw in.
I had an extremely hard time getting it on one screw on that plane.
And I've already found that I'm going to have a similar situation with this plane.
It's hard to see the reciprocal.
But I just wouldn't put the second wing on before I even try to get that one.
So, I just want to show you how far this, the hole is off.
And like I explained, I had a hard time with the last aircraft.
And it's extremely hard this time.
Same thing, I got, well, last time I was able to get all but one.
Now I'm only getting two.
And at one time, the other two are going to be extreme fight.
Look at that, you can see that one completely off.
So, I'm totally disgusted with this.
Like I said, I had a super hard time with the last airplane, which is, I believe, to be the exact same thing with a different body style.
But, look, I think it's just to try to get this on tape.
Look how shallow the amount of threads there is when you have this whole chamber.
They could have made this screw a couple of millimeters longer.
So, you got this big block to go through.
But it's not, I got it where it was screwing.
I felt like I was in the hole, but it's not catching.
I feel like this screw is too short.
And everything I have in my little screw kits is just like stuff that's not going to work, basically.
Cap screws that's going to stick out.
This has got to be counter set.
This is stupid.
I don't know how they could have a kit that's not new and have something that's so off.
So, after much manipulation, taking all the size drill bits to drill out this hole slowly by hand, I got it to where it's tightened.
And it's going to be strong enough for flight, I would believe.
So, this is on the first step.
Let's hope the rest of the build gets better than this.
So, I'm installing all the glue on parts.
So, you get to these and they have a little area that's not painted for you to get some strength.
However, on the other part, in vertical and horizontal, it's not.
So, I just took and sanded off some of the painted area to just give me some styrofoam to bite into with this glue.
I'm using foam to foam.
It recommends medium CA, but it seems like everybody I see building is using this.
So, I'm going to follow the experts.
They're all flying them.
Now, when I did that one, I did use CA.
And like I keep saying, it's identical to this one.
I didn't have any trouble with it flying.
Nothing's falling off.
So, the CA works fine.
And I didn't strip anything.
Everything was fully on the painted surfaces.
So, so far, so good.
So, I'm just going to take my foam to foam and blow off any debris from me sanding and stuff.
And I'm going to put a nice bed of it in there.
Come back as far as I can this way.
Fill the gap on that side.
Just put a lot in here so that it at least has its best...
Oh, sorry.
Has its best chance to...
Really hard to film yourself doing stuff, but I'm trying.
And it looks like when I'm doing a good job filming, I'm not doing a good job of what I'm doing.
So, once I get the foam to foam in there, I usually take and put some on this side.
But I can't do that one-handed, so hang on.
So, I just run a nice smear bead on the other surface.
It's hard to see with all the paint stuff, but I just kind of...
You can see it if you look at it.
Different angles.
Just kind of a smear bead.
And I'm going to kind of position this on here.
And pour it down where it goes.
And I'm going to let it bubble up a little bit.
And I got plenty of glue in there, so I'm going to pull it apart.
Let it air and check my surfaces.
Make sure I'm getting enough contact.
And it looks like I am.
It's not the perfect way around, but yeah.
Getting a really good area.
So, I'm going to put the phone down for a second and wipe off that excess glue.
You see that glue right there on that ledge?
That's what I'm getting.
Alright, I got that little glue off.
And some more might come out in this process.
I'm just going to get it set in like it goes.
This aircraft has a very positive seating of where the stabilizer goes.
You could probably rock it back and forth trying to figure it out, I guess.
But it sits in pretty good right there.
Yep.
So, I have a lot more seepage than I did on the other side.
Because I probably put a little bit more glue.
But anywho, I am going to clean it up now.
So, the next step in the directions is to connect all the linkages and such.
I'm going to skip that for now.
I'm going to skip the wheels for now.
Because I'm going to let the glues dry overnight.
But I am going to go ahead and hit this nose cone.
And I'm on the fence about the ordinance.
This guy has like a slide on ordinance job.
Whereas these ordinance glue on permanently.
I don't know.
I don't know. I love the look.
So, I guess I'm going to probably go with it.
But I'm thinking about it.
Let me do the nose cone first and go from there.
So, it's an interesting situation with the nose cone.
It's not like a pop off.
Like that one has a magnet.
So, if you put it on in all kinds of positions.
It points up in weird little things.
And it doesn't fit just right.
But I figured out when you get it to the right position.
Where it looks good.
You just kind of.
Of course, I dropped it again.
Yeah.
You spin it until you get it kind of where it looks right.
And then you try it on.
And boom.
I think that's it.
So, let me get some glue on it.
I'm going to use CA for this because this is not foam.
Well.
I think one of the coolest things about an F-18.
Is that the side winders on the tips.
Make it just look cool.
So, I'll probably end up knocking these off.
Or some variation of.
But I'll just keep taping them.
And gluing them.
Or whatever it takes.
So, this of course.
Has just a little bit of foam showing.
Of course, no foam showing here.
I might try to do a little score in there.
Just to give me a little more bite on the glue.
And I probably will use CA for this.
Um.
I don't know.
I guess the foam should work.
Maybe I will.
Give me a little extra time.
Because man, the nose cone.
I got the glue on there.
And then as soon as I seated it.
It was done.
It just fit.
So, fortunately I had it where I think it goes.
It could have been bad.
If I needed to slide it a little bit.
Because it wasn't going to slide.
I went ahead and.
Uh.
Got some of the paint off of.
The uh.
These missiles.
I don't know what these are.
I might have to look them up.
They're definitely not Sparrows.
Maybe Amrams.
Not sure.
And the Mark Series Bombs.
I'm thinking about maybe painting them.
To kind of match missiles.
And bombs better.
I'll probably also do the same with the wingtips.
Because the sidewinders are the focal piece.
But at this point.
I can fly it like this I think.
Because.
It has the look.
I don't need the bombs.
You know what I'm saying.
That's the look I'm after.
The wingtips are the only thing that's necessary.
So.
I'm going to hold off on the other stuff.
Uh.
I'm going to hold off on the landing gear for now.
Because I want to be able to flip it over.
I probably should have put it on like they recommended.
Because I was going to be able to flip it over.
And kind of.
You know.
They recommended it.
After these anyways.
So that means you couldn't flip it over either way.
So alright.
It is what it is.
But they weren't hard to put on on the last aircraft.
So I'm pretty confident on how they go on.
Alright so.
Battery and radio.
So I'm just going to let this dry.
And then perhaps.
Tomorrow.
Give it a try to finagle with things.
And put the horns on and such.
To get things lined up.
But.
Beautiful thus far.
So of course.
Being impatient.
I put the gear on so I could hang it on the wall.
Like I do that one.
Um.
But as you can see the bottom.
It's not going to bother me that those.
Uh.
White foam spots are going to be showing.
Uh.
Yep.
So I'm going to keep going.
But.
Like.
You can see the whole.
I like the little locking mechanism for the servo.
But there's extra wire.
As you can see right there.
And there's these grooves for the servo wire.
Which they came pretty tucked away from out the box.
But you know.
You can see them.
The E-Flight bird has like.
Matching color tape.
It even has like blue and gray.
Covering the areas where the.
The orange wire is showing.
Like that's weird for that to be showing.
I might have to.
Figure out some kind of tape to put over it myself.
Because I'm.
It's terrible.
Just another added thing.
So.
There's only one hole.
That this will fit in.
It tells you in the directions to put it to the bottom hole.
But the second hole is big enough to fit in.
I mean I could have drilled it out.
Don't get me wrong.
But I think it's.
That's where they wanted it.
Alright.
So I used the AR630.
For this.
And.
It's going to be really hard.
To get a shot.
Oh there it is.
Good shot right there.
So if I can get it to focus in the right area.
Alright.
You see I mounted it to the top upside down.
With the bind button facing forward.
And the plugs facing back.
The reason why I decided to go with this configuration.
Was because the wires were coming out of the back.
I was going to.
Maybe extend them.
And put them up here.
And I'll explain why.
Alright so this is the F15 obviously.
And I was just like.
To me these birds are almost identical.
In most ways.
But you can see it's real busy.
In that little.
Wire chase.
Of this one.
Let me take the nose cone off.
Yeah there we go.
It's cool that the nose cone comes off.
So I'm going to see if I can get it.
Focusing.
You see it's real busy in there.
When you pull this out the way.
And you stick your battery in.
You're fighting a bunch of wires.
I might eventually.
Tape this stuff on the side.
Because I haven't flown it very many times.
But anyway.
So then up in the front.
All of your business.
Comes to this.
To the AR630.
And uh.
They got it neatly set up.
Like there's like a bulkhead there.
For it to sit on.
Kind of perfect set up.
And I was like oh well this seems good.
They even got like a little hole.
Where the wires chase through.
So when I get in here.
Alright there is no bulkhead.
It would be sitting way down low.
Unless I made something.
And the wires would.
You know I could definitely chase them through.
Like they had it but.
I noticed that the directions.
For the receiver said to.
Place the receiver as close to CG.
As you can get for best results.
So the CG is way back here.
Obviously.
So I'm closer to it than I would be in the nose.
And this aircraft.
Oscillates a little bit in flight.
I'm trying to figure out how to fix that with a gain or whatever.
But anyway that's not the point.
The point is.
All that wire was in here.
Just a big ball of mess.
I wish I would have showed you all.
Before I went this far.
But I'm doing this all by myself.
So it's kind of hard to film.
Like this build myself.
I should just probably set up the tripod.
But the problem is.
When I do set up the tripod.
It's like I can't get the angles that I need anyway.
So for the most part.
I'm still taking it out and putting it on.
Which I probably should do anyway.
Anywho.
I'm to this point right now.
I've taken a piece of wire.
If you can imagine.
All of the wires were just a big ball of mess in here.
Kind of like that other bird I just showed you.
So I took a piece of electrical wire.
Made a little flat surface.
For it to gain into.
And then I just went in here.
And I pushed them all back.
So they are all back in that little hole.
And I was like where does that hole go?
I looked in here.
And I can see that it tapers.
To like a V.
And then I guess there must be like.
The smallest chase for the ESC wires to go.
So at the end of the day.
The basic concern that I had.
Was that they might go into this area.
And get by the fan or something.
But they definitely can't.
So.
And I'm looking deep in there.
Trying to show you guys deep in there really.
There's no way those wires are coming in there.
So it's just a chase for wires.
So.
They end up balled up in most aircraft.
That I've seen from eFlight and everybody else anyway.
So they're not exactly balled up.
They're nice big loops in there.
I just ended up neatly tucking them all in.
So the one for the steering.
It comes in a nice little bedded chase.
And there's no provisions for it after that.
So I'm just going to take some tape.
And kind of fit it in.
So I'm going to see if I can't do this.
To kind of show you what I'm going to do.
I'm just going to take some clear.
Tape.
And I usually have fairly decent results with this.
I'm going to end up.
Blocking that little vent right there.
So I don't want to do that.
I'm going to cut a thinner strip.
Because I want it to look neat at the end of the day.
Alright I got a thinner strip.
Kind of see that.
I'm going to lay it on the wire.
And I'm going to flatten the wire out.
It's still covering that little gap.
That I didn't want to cover.
So I'm going to have to.
Rethink that whole process.
But.
I can definitely maneuver it.
Like I want to.
It's so hard to do this by yourself.
My wife always says.
She's so ridiculous.
This cannot be done.
By yourself.
The people that do this are a team.
And that's how it works.
So.
There we go.
I have what I wanted to achieve.
Was getting that wire neat.
In that area.
I kind of wanted to illustrate that.
Because it's one of the things.
That's important to me.
I don't just want it to be.
Uh.
You know.
I want things to be neat.
And aesthetically pleasing.
When I'm looking at it.
When I open the hatch.
I don't want it to look chunky.
And wires everywhere.
So I'm going to get rid of that little V.
That I didn't like.
Folded in the gap.
Alright.
Now.
I'm going to see if I can't get one more piece.
Just to secure that wire.
You get the idea.
I don't need to show you all that.
I'm going to pause.
Alright.
Now that that's all not dangling.
I got a very clean area.
To install my receiver's guide.
Velcro on it at the top.
Seems to be holding well.
Shouldn't be doing much.
Because it's just going to sit there.
And flight.
So now I can do my gyro configuration.
Which is brand new to me.
Make no mistake.
I'm not one of these guys.
With the crazy YouTube channels.
That give you super duper details.
Because they know it.
And they do it.
I am just figuring this out on my own.
And I'm aggravated in most of these situations.
Because there ain't much info out there.
For the things I'm trying to do.
In YouTube.
There's thousands of people.
Not thousands.
But there's a lot of people on there.
That take this aircraft and fly it.
But they don't even show you with the canopy off.
Which aggravated me quite profusely.
Because I wanted to see.
Did everybody put it up here?
Or what were people doing?
I was so frustrated a few minutes ago.
I did.
What's up Flip?
We got the F-818 Super Hornet.
Wow that's pretty.
All views.
Do a thrust in the face like normal.
Piece of cake.
Nah you're fine.
Wheel came off.
That was the hatch that I was worried about.
Just keep flying.
Yeah it's just the hatch.
Maxed out on my trim.
Still coming down some.
I definitely need to adjust it.
I got to put a magnet in that hatch for sure.
It's a weird.
But it's fine.
It's the first bird ever set up like this.
It's working that's the difference.
Yes it is.
I know you didn't get that.
I had to give it all of my trim.
All my trim is down already.
And I'm still having to give it some sticks.
So I definitely got to adjust it.
Not bad.
Awesome.
Got a gyro in that?
I do.
Let's see if I can land a stick.
Pulling down?
Yeah.
I'm coming in.
Oh yeah.
Still in one piece.
