DIY Geode Soap _ Beauty Junkie.

Cosmetics and Beauty Ways
136 followers
Hey guys, it's Kirby.
So, DIY time.
It's DIY geode soap.
So, these soaps, you might have seen the kit
by Honestly WTF, and I think that's a great option.
If you can get it, they're sold out everywhere.
So, this is a really nice DIY option,
literally DIY option, where you can just go
to the craft store, get some stuff, and make it.
You wanna find white and clear glycerin soap.
They sell this at the craft store.
It's really easy to find,
and it's relatively inexpensive too.
You can get about two pounds for about five to eight dollars
depending on where you live.
The two pounders, all right, they're hefty.
So, you need to cut those into fourths.
So, cut it in half, and then cut those halves in half.
From here, set aside a quarter of each,
because we're gonna need that later,
and then you're gonna take another quarter,
and you're gonna melt both of them,
one white and one clear.
Now, this is your soap base.
I'm sure that you could use a bar of soap
that you have at home, but the key is
that you actually need a clear soap.
So, if you have a clear soap, great,
but that's why I highly suggest going out
and just getting a block of the glycerin soap.
Once you microwave those for about two minutes,
because that's how long it's gonna take,
you wanna set up little tiny containers
so that you can mix different shades.
You're gonna pour the white soap and the clear soap
into each of the four little containers,
and then from here, you can mix it with food coloring.
I just wanna advise you that if you're gonna use red,
use the tiniest amount of red.
Don't even use a full drop if you're trying
to make a pink pastel shade,
because that red is super pigmented,
and it'll look almost like radioactive red.
Now, I wanna create an ombre effect,
so here I'm using blue and a little bit of green,
and I'm adding more food coloring
to increase the intensity of the shade.
Also, have fun with it.
I did some pinks and purples too.
I added a little bit of shimmer
because I had some loose pigment
that I would normally put on my eyes,
but let me just say that I am not a fan of wasting makeup.
However, I just have so much loose pigment
and I can't get through it fast enough,
so I used a little bit of this
just to razzle-dazzle the soap.
All right, so once you have all your shades,
I kinda went crazy.
I was like, I'm giving these soaps to everybody.
So I have a variety of different shades,
different mixtures, some have sparkle in them, some don't.
You're gonna let them set for about 20 minutes.
You want them to be hard.
Then just dump them out and then cut them
into small chunks or small pieces.
You could probably even go smaller than what I'm doing.
The goal is that you want them to be small
so that later on, they're gonna melt properly,
which I'll get to in a second.
Okay, so you've cut all your pieces.
You have your opaque pieces,
you have your translucent pieces.
You're gonna put them into a clear plastic cup.
At one point, I just stopped caring
and I just started throwing them all in there,
but it looks really cool
when you put the darker pieces on the bottom
and then the lighter pieces on the top
because what we're going to do next
is we're gonna take those leftover quarters
of the white and clear glycerin soap,
we're gonna melt those again,
and then we're gonna take the clear glycerin
and we're gonna pour that first into the bottom of the cup.
So that way, those darker pieces really stand out.
Then we're taking that white
and we're gonna put it on the top of that.
So what this is doing is the heat from the clear
and the white is basically melting those smaller pieces
and they don't need to be completely melted,
but they're gonna melt them all together.
And you're gonna let it dry in this clear plastic cup
for about 20 to 30 minutes.
You just wanna make sure it's completely solid.
If it's a little bit warm, that's fine.
It's gonna make it easier to carve in a few minutes.
Okay, so you're ready to go.
You have your cup.
Your soap is ready to be carved.
So I'm just taking a sharp knife,
going through and cutting it,
and then you just tap it a few times on the table
and it's gonna come right out.
Now from here, this is the fun part.
This is where I feel like you really get into it.
You take your knife and you start carving it into geodes.
So you might be thinking,
wow, you went ham with this carving situation.
That's a lot of wasted soap.
No, it's not, because what you're gonna do
is you're going to cut it into small portions
like you did at the beginning, small little cubes,
and you're gonna take half of that
and you're gonna melt it and pour it on top
of the little cubes in the cup
and you're gonna create another soap.
I feel like even some of these pieces could be smaller
and melted a little bit more,
so it really kind of just melts together.
But I think this is really cute and I did a great job.
Cut on the back.
All right, let me know in the comment section below
if you'll make these geode soaps,
if you plan on gifting them to anyone,
and other DIYs that you wanna see me make,
just let me know, type away in the comment section
and I am yours, I am here for you.
So as always, you can follow me on Instagram and Twitter,
at Kirby Johnson, and Snapchat, behind the scenes stuff,
kirby.johnson.
I'll see you next time.
Oh, and subscribe!
Don't forget to subscribe, as usual.
Bye!
I have a geode soap, I have a geode soap.
Hello, my precious.
There's something really gratifying about having a knife
and just like slicing the little,
why do I make that voice every time I hold this one?
