Would you have saved this? Fixing Damaged Veneer on a Vintage Art Deco Table Full Restoration

Antique Art Deco
12 followers
50 Video Views·May 28, 2025
This poor old Art Deco table had been through a lot — chipped veneer, deep wear, and years of neglect. In this video, I bring it back to life with careful restoration.
You’ll see:
How I repair and blend damaged veneer
keeping the character while restoring beauty
Before & after transformation shots
Whether you're into antique furniture, DIY makeovers, or just find restoration videos oddly satisfying — I hope you enjoy this one.
Subscribe for more vintage transformations and behind-the-scenes process videos: / @rustyandunhinged
Comments are disabled for this video.
So my next project, something small for a change, this lovely art deco table
is going to have a restoration overhaul. So you can see at the top
lots of watermarks and stains and so forth and so on. That one especially concerns me
and that one concerns me but I think they might come out okay with oxalic acid.
The edge banding veneer around here is around the rim so this one looks okay. The top seems okay.
It's intact. I don't know how thin it is so I'm going to be very hand sandery on the top
in no electrical equipment as much as I can. But the edge banding there's issues all around it
actually so I'm just spinning it. Problem, problem. No, not a big problem but
bits of little veneers, bits and bits, chunks, somebody's chewed on it. I don't know.
So all that needs attention and then the rest of it is just filthy, dirty, gross
and it's going to be brought back to its beautiful self. Well that's what my intention is anyway.
So starting with disassembling the curved legs from the top part because I want to
on the top part first. So just doing a little bit of unscreening.
So now that I've got the legs off I've just got the top to focus on. I am a bit of an
impatient person so I want to get stuck straight into that so I'm just going to use a hand sander
as I said. I don't know how many times this has been restored in the past, if any, so I've got
no way of knowing how thin the veneer is and how close to the surface of the veneer I could be so
I just want to go nice and easy. So the grit on this sandpaper is a 120 which I generally wouldn't
do anything less than that when working on the veneer and I'm not pressing too hard either.
I'm just keen to scratch the surface, see what does come off
and get some oxalic acid onto it to see what stains come out.
So I've already started applying some oxalic acid onto this. I'm pretty keen to just see
what I have left to work with and the oxalic acid, which is a crystallised substance mixed
with water that you use to remove certain types of stains from wood such as rust stains,
water-based stains or iron stains. Once the oxalic acid has removed the stains that it can
remove that then gives me a clearer picture of any other repair or work I might have to do even
potentially swapping out the veneer, which I don't think I'm going to have to do.
So now that the oxalic acid is on I'll be leaving that
for overnight. I won't even look at that now until tomorrow morning, give it time to work.
So while that tabletop is drying I'm going to take the legs off of the bottom. So I've only
detached the legs from the top of the table so far. I now want to detach them from that
little circle on the bottom and also detach the
little feet from the legs as well so that everything is separated and I can clean everything,
sand everything, stain everything, etc. So they're all detached now. I did actually
have the help of my very kind neighbour who popped down to use his brute strength on some
screws because I couldn't undo some of them. Some of them haven't been moved in a long time.
Anyway, you know, that's just how it is sometimes. He got them off with no worries and I'm pretty
strong. I'm just showing you some of the, there's a couple of little bits of veneer
damage or edge banding damage on this as well and I'm just contemplating whether it's small
enough to just use a wood filler or whether I need to pop some veneer on there
later. A little bit of sanding, the same as the top one. I'm just flipping this over
and just getting rid of all the glue using the electric sander on the underside. There's a lot
of glue sticky up bits that I just want to sand down without impacting the timber too much.
So I'm ready to do something with the legs at the moment. I've got the bottom circles,
now I've got oxalic acid on it, same as the top bit. I'm waiting for that to all soak in.
And with these legs, I can use the electric sander with these legs because they're solid wood,
there's no veneer and not only that, I'm using the sander because they're very old and the lacquer
on the timber is very, very thin. You can see, I've barely touched that and it just came right
off. So it won't even cost me one sanding sandpaper. So I'm going ahead with all of that,
getting off what I can. I haven't been able to work out how to get the feet off yet.
I'm going to miraculously figure it out very soon. I haven't been able to figure it out.
I've undone all the screws and yes, anyway, you'll see what happens.
Quite embarrassing, accidentally find out how to get them off.
I've struggled to get that foot off and I'm about to be stung because after hours and hours of
trying to get it off, I chopped it off with the slightest tap of the hammer. Goodness, goodness.
You didn't see the hours, luckily I didn't film the hours and hours of trying to get it off.
So with this one, there was a little screw in there and when I pulled it out, I noticed a
longitudinal split just there, just in that, where I'm kind of in the middle of where I'm showing you.
So what I'm going to do is go ahead and, just there, yep, it's quite a long one.
I'm going to go ahead and put some glue in that and clamp it and leave that for the night.
So I did go ahead and pop the glue in there off camera. I didn't do it off camera for any
particular reason, just to watch this record, so I'm just in the clamping process now. But what I
did do, instead of using an injection or a little syringe, sorry, of glue to put that in there,
which would have probably worked, I actually used a very tiny screwdriver that I had,
pushed it into the hole and just did a little twist to separate the split and then
pack some glue in there and then I'll wrap it in some painters tape,
just to protect the clamps from sticking for no other reason.
And now I'm just applying the glue and I'm applying it both ways so that it doesn't dry
crooked. It looks like I'm over clamping in but really sometimes you can't have enough clamps,
especially when you want to set timber to timber.
I'm just popping some oxalic acid on the legs and feet now and I almost, to be honest,
don't need to do that. I'm doing it because I did put oxalic acid on the top circle and the
bottom circle, so I just feel like I should complete that with the whole furniture piece
now. It's just really a game of even Stevens and probably a little bit of a waste but that's what
I'm doing. So just sanding off the leg that I'd glued and clamped, just sanding off the residual
glue and that has set beautifully overnight and it's perfect. You can't tell that it had
any damage to it and it matches in beautifully with the others now.
So finally the legs are ready for stain. They're all beautiful, cleaned, sanded, glued, clamped,
what have you, and the pieces of timber I believe on this Art Deco table are walnut timber. So based
on that assumption I'm going with walnut stain. It looks divine in real life. I'm not sure if
that's coming across on camera. I just want to comment about these legs. Whoever came up with
the idea of bending timber for legs and particularly during the Art Deco period,
which is one of my favourite periods, it's just gorgeous. They're just lovely. The wood is
beautiful, the table is lovely, the way the wood is bent is beautiful. It really is a pleasure
working with these designs and kudos to the, I'm going to call them artists, but furniture makers
that even came up with these designs. It's beautiful. I've started to do a bit of sanding
on the edge banding here because I'm having a bit of a look to see what I need to do here.
I've also gone and put a little bit of bog or what's it called, what's bog called,
wood filler. Oh my gosh. There's teeny tiny little gaps in this edge banding. I really couldn't
probably cut the veneer as small as what it requires so I've decided to just put some wood
filler in the gaps and just sand it off and see how that looks as a start on the small one,
only on the small one. The damage wasn't as drastic on the small one as it was with the big
one. It's just the tiny little, tiny chips. I think that might work out.
I'll add to that too that I'm using a very fine sandpaper on this edge banding.
I think I might have used a 180 at the very least.
I'm happy to report that this small little foot circle came up absolutely perfectly.
I'm going straight in with the walnut stain. The edge banding using the wood filler technique
turned out perfectly and I meant to say before I said I couldn't cut them that small. Probably
what I meant was it's rude to glue them that small. Look at that, that's turned out stunning
and I'm just going to do the edge and honestly it's all turned out perfect, absolutely perfect.
What I've gone and done off camera was the same process that I did with the small circle. This
is now the top circle so by no means is this an adequate repair just yet but the top circle
on the edge has also got teeny tiny little chips out of it here, there and everywhere so I've
decided to fill those in before I go in with the veneer repair just to see how they turn out as
well and they're coming up okay which we'll get clear in a minute.
So I've gone ahead and put walnut stain on the top which looks fantastic and I'm now going to
put walnut stain on the edge banding. Now by no means have I repaired the edge banding yet properly
but I've decided to, it's a bit backward and it's a bit skew it probably and on paper it's
probably not the right way to do it but it's the way I, it's what I've decided is going to work for
me on this occasion so what I want to do is stain it all so I can see the imperfections and once
they're stained they're going to be easier to see and I can repair the veneer so that's
and then I'll have to re-sand and re-stain. I know but for me that works because once it's sanded
it's so white, it just looks like sand, it's very hard to pick up the individual imperfections so
it works for me.
So as promised this section of veneer right here is absolute rubbish and it needs to come out and
it's really popping because I've put stain on. I could have used water but it just keeps drying
so it's hopeless so I prefer to use the stain. So I've scratched the surface, I've cut out as much
veneer as I can, that veneer looks like it's still there on that spot but it's actually
a stain or a shadow of it and I've scored it as well to make sure that the new veneer piece
that I've cut out to shape will fit and I'm putting glue on where I'm going to put the
new piece of veneer as well as on the piece of veneer, important to do all of the surfaces.
I've got a bit of excess glue on the veneer so I'm using that
glue stick. I just need to hold it there for a minute until it sort of grabs and then I'll
sit around upset about figuring out the best way to apply it but that looks pretty smart,
that looks lovely and it's proper, good, but the painter's tape won't, is not sufficient
enough to create a bond between the timber veneer and the table
so a little bit more reinforcement is required but it's a very good start.
You can see that I've gone ahead and put a couple of clamps in place there. I've used that little
plank to put pressure on the veneer to hold it in place and then some clamps around that to just
really make the bond stick. So it's the next day and moment of truth, the painter's tape is coming
off the veneer so I have more than one veneer to do on this table but this one is the biggest one
and probably the one that I'll end up using as a demonstration
and I've just gone and forgotten that the camera's not
on the table and I think I'll wake up any second. I think I suddenly woke up, there you go, sorry about that.
I just forget everything sometimes.
We've got it, here we go, perfect, perfect, perfect. It doesn't look perfect yet because
it hasn't been stained but that is perfect. Now it's a little bit raised, it does need the sand
but that is lovely. I also did one earlier and spotted one and I just thought I'm going to add
to this one as well, just a little one.
So you can see from that process that repairing the veneer isn't that difficult, it really is
just a case of repairing the area well, making sure it's ready to receive the veneer, whatever that looks like and then gluing it and clamping it so really the veneer isn't that scary.
It's got a little teeny tiny repair to do here so I'm just using a little like
quarter of a centimetre of the veneer really for this bit. It could almost just have wood filler
but I've decided I will for this one so I've just cut out a piece to fit and I'm just going to glue it in
and that will receive a clamp later on as well so I might just speed that up for you.
So I'm just doing this little bit here now too, same process, I'm cutting out the old very thin
bit of veneer and I'm also scoring a little bit whatever's left as well just to give it something
sort of structurally to adhere to, giving it something substantial to adhere to.
So now just getting the shape, just cutting out the shape of the veneer to make it
an exact fit as much as I possibly can. It's a lot of eyeballing honestly, well that's how I do it anyway.
So I've glued it and I'm just holding it in place for a bit until it grabs.
Cutting this tight, that was just a little tiny like quarter of a centimetre of veneer there.
So I've gone ahead and clamped all of those little veneer repairs and what I've done is I've put a
bit of flexible plastic over the top of all the veneer repairs and then pressed the clamps up
to just really push it in which works well.
