🛠️ How to open ASUS ProArt P16 H7606 (2025) - disassembly and upgrade options

LaptopMedia
183 followers
5 Video Views·May 27, 2025
🔬 In-depth Review: https://laptopmedia.com/review/asus-proart-p16-h7606-2025-review-is-this-the-ultimate-4k-oled-workstation-for-creatives/
📈 💵 Specs and Prices: https://laptopmedia.com/series/asus-proart-p16-h7606/
🎮 Subscribe to our GAMING BENCHMARKS channel:
https://www.youtube.com/channel/UCLJ-FnaQC5P7DAJnZz9YZFQ?sub_confirmation=1
Today, we'll open the 2025 edition of
Asus ProArt P16. This is a high-end
laptop for creators, and you can read
our in-depth review on
laptopmedia.com. Two of the screws on
the back cover are hidden under these
rubber caps. We start with
them. Using a suitable tool, like a
utility knife, we sharpen one end of the
plastic tool. The goal is to remove the
rubber caps while preserving both their
integrity and the adhesive layer
underneath so we can easily reattach
them
later. The adhesive is applied here on
the narrow edges and in the center of
the
cap. Here is the adhesive layer on the
second cap as well.
We removed them without any damage and
with the adhesive layer preserved. Now
we start unscrewing the screws which are
11 in total. The first four are the
shortest. The screws are not of equal
length. We use a Torx number six tool.
The first screw doesn't want to come
out, likely due to a bit of thread
locker applied during assembly. We
continue with the
rest. We'll initially place them
carefully on a white surface so their
lengths are easier to distinguish.
We'll let the first one wait a little
longer. Let's use the plastic prying
tool to remove that first screw, too.
Now we remove the last four screws,
including the ones hidden under the
caps.
We transfer them onto a magnetic pad to
keep them organized and prevent losing
any. These are the shortest screws.
Right here is the most convenient spot
to start unclipping the bottom cover.
Last clips near the hinges.
This is how the laptop looks with the
bottom cover removed.
Now we need to disconnect the battery
connector. To do that, we need to slide
back the locking metal plate.
The connector is removed by pulling it
vertically upwards. The battery is a
four cell lithium ion unit with a
capacity of 90W hours. You can check the
results of our battery life test on
laptopmedia.com. The link is below the
video. Don't forget to visit and see our
top 100 laptops with the best battery
life ranking as well. Next, we'll remove
four screws securing the battery to the
laptop chassis. Avoid using Phillips
standard screwdrivers because they don't
fit snugly and can damage the screw
head. Philips standard number zero
doesn't fit well and may slip and strip
the
head. Philips standard number one
doesn't fit at all.
A gistype screwdriver fits tightly and
unlike the Phillips standard, the screw
head's slot profile doesn't affect the
torque when screwing or
unscrewing. Two more screws left.
The Wi-Fi card can be removed by
removing this
screw. Let's remove the
SSD. It has an aluminum protective
shield.
ASUS ProArt P16 has two M.2 slots, one
PCIe 4.0 with four lanes and one PCIe
4.0 with two lanes. Our two TB
configuration arrived with Western
Digital PC SN 740 SSD. Of course, you'll
find detailed benchmarks in our full
review.
After you're done upgrading or
maintaining your Asus ProArt P16, don't
forget to plug back the battery
connector.
If you need to know everything about
Asus ProArt P16, read our in-depth
review on laptopmedia.com. The link is
below the video.
