BRILLIANT 🤩 Dollar Tree Tin Can DIY HACKS | Budget Friendly & Beautiful!

My corner of crafts
13 followers
Hey Bestie, it's Lisa.
Welcome or welcome back.
Today's episode is about using Dollar Tree tin cans.
I've got this tin can.
Actually, this one didn't come from Dollar Tree,
but you certainly can get one the same exact size
from Dollar Tree.
I just use the cans in my stash.
I've also got this gorgeous napkin,
and I have a handle that I got at Habitat for Humanity.
You could pick a handle like that in any hardware store,
or if you have an extra one at home.
I'm gonna pull off the label and everything,
and then I'm just gonna get rid of the sticky stuff.
I'm gonna take this can,
and I'm gonna start squishing one side
of the top open part.
Now, this was possible to do with my hands,
because these cans aren't that strong.
I'm gonna take my Plaster Color Chalk Paint by Waverly,
and I'm gonna cover the whole thing.
And the reason I'm doing that is I want a nice,
light base underneath before I put my napkin on.
I'm gonna take a little piece of masking tape
to separate the plies of my napkin.
If it's two ply, you only have to pull off one piece.
If it's three ply, you've gotta pull off two,
just so you're left with the one with the design.
I'm gonna cut a piece that's around the same size
as my can, a little bit bigger.
And then I'm gonna cut a piece for the bottom.
I do wanna finish off the bottom of the can as well.
I'm gonna be using Mod Podge for this.
You can use whatever adhesive that you want.
But with decoupaging, this is my favorite one to use.
And then I'm just gonna put a piece of the napkin
on the bottom, press it down carefully
with my fingers very gently.
And then I'm gonna cut off the big edges as much as I can.
And if a little bit is left over, that's okay,
because then we'll just push that down
with some more Mod Podge.
And I'm gonna cover the whole thing with Mod Podge as well.
So now I'm gonna cover the rest of it with Mod Podge.
I'm gonna take that first piece that I cut out,
and I'm gonna start at one point towards the back.
And then I'm just gonna lay down Mod Podge
in smaller sections.
I like to do that so I can make sure
that I get it positioned correctly.
And the reason I make the piece bigger
is because it's very hard to go around
and make a perfect circle.
So if I have extra edges, that really helps.
I will cut off the excess when I get all the way around,
and I'm gonna Mod Podge over the top of where they met.
And then I'm gonna go cut off the excess
on the top and the bottom.
Again, it's okay if there's a little bit left over.
It's hard to hold that straight when you're cutting it,
because you'll just use some Mod Podge
and press down those little pieces across the very bottom,
and then into the top of what...
This is gonna be like a little decorative picture.
Now I've gotten rid of the pieces at the top,
and I put some Mod Podge around that.
Now I'm gonna take the handle.
I'm not gonna use screws or drill it in,
because it's just a tin can.
So I'm gonna fill in the gap on the backside of the handle
where it's kind of hollow with some hot glue.
And once that dries, I can also use E6000 and hot glue
to attach this to the side.
We're really not gonna use this as a functional picture,
so I'm not worried about the weight of that.
I'm gonna take some of my Antique Gold Rub and Buff,
and this particular handle was very bright gold,
and I wanna tone it down
and make this look a little bit older.
So I'm gonna do the whole handle, and I love the look.
I'm also gonna go around the whole top of the can
and the very bottom edge of the can,
just to give it some more of that accent
using the Rub and Buff.
I haven't used mine for a while,
and I keep forgetting that I have it,
and I sure love using it.
It does add a really nice look to things,
especially if you have a bright gold.
And not that the edges on this one,
you know, the top and the bottom are bright gold,
but I wanted it to kind of tie together
with the handle that I have on there.
There it is.
It just looks so beautiful.
I love this look.
What a cute little decorative piece
to sit on a shelf or anywhere that you want.
And what a great way to use a tin can.
Let me know what you think of this one.
I have another tin can.
This one's a little bit smaller and taller.
And then I've got a piece of tissue paper.
Isn't this paper gorgeous?
I received it with a gift that I got.
So I thought, I'm gonna use this.
So I'm gonna take off that label on the soup can.
Again, you can definitely get these cans at Dollar Tree.
This particular one was in my stash.
I'm gonna take a hammer
and I'm gonna start pounding one side of this,
except for the very bottom.
Then I'm gonna turn it over
and I'm gonna pound the other side.
I wanna crunch this can down.
Kind of like a smashed can.
I'm sure you've seen things like this before.
Of course, it does close it up a lot.
So I took the other side of my hammer there
and I'm just kind of widening the opening.
Now I'm gonna crunch a little bit
in the very middle of the bottom
so that the can will stand up better.
So now I'm gonna take my plaster chalk paint.
Because I'm using a lighter patterned tissue paper,
I like to paint white underneath
because otherwise it would look darker
with the silver or the can color underneath.
So I just put a light coat all the way around.
And there it is.
I did the bottom as well.
Now I'm gonna take my Mod Podge
and I'm gonna put some on the very bottom.
And then I'm gonna take a little piece
of that tissue paper just for the bottom.
I like to do the bottom first
because that way you can get rid of those edges
that come up around the circle there.
And you won't see them because of the paper
that's gonna go around the can itself.
So I'm just trimming off any excess.
And of course, it's okay to leave a little bit there
because we're just gonna take the Mod Podge,
cover the bottom, and put it around all the edges
to make sure they're laying down flat.
Now I'm gonna put some Mod Podge on one side.
We'll start on one side.
And I cut a piece of tissue paper
that's larger than the piece I need on both ends.
And I'm gonna start gently pressing it down with my fingers.
And then I'm gonna add more Mod Podge.
Do the same thing and then cut off the excess on the side.
And I will also cut off the excess
at the top and the bottom.
And I do this before I put Mod Podge over the top.
Otherwise it would be wet
and pretty much ruin the scissors.
And now I'm gonna go around the bottom
and I'm just gonna get that edge to lay down.
And then I'll do the same thing on the top
and just make sure that you don't see those edges
that I tuck them in and then add the Mod Podge over that
so that it will lay down really, really nice.
Now I'm gonna go around and do Mod Podge
over the entire thing to seal it in.
Here we've got our little smashed can,
which is now a beautiful flower vase
or you could put a hanger on it if you want it.
I've got this gorgeous kind of twine ribbon
from the Dollar Tree.
And I'm gonna put one piece all the way around the top.
I thought this looked so beautiful as a trim
for this particular piece.
Using hot glue to make sure that that is nicely adhered.
Now I'm gonna take some beautiful flowers
I found at the Dollar Tree.
I love these little purple ones and they're so cute.
And I'm just gonna kind of trim them
and start sticking them on the inside.
You really don't need to fill the inside with anything.
They're gonna stay in there just fine.
I found some other kind of lavender-ish looking flowers
and some greenery that I also got,
but that one's from Amazon, the greenery.
And you can usually find most of the things I use
from Amazon in my Amazon store.
Just gonna put them into my liking
and just kind of decorate it
the way I think it will look really, really pretty.
I love full lush type of floral look.
I mean, unless I'm just doing an accent.
When I'm doing an actual flower arrangement,
I love all different like textures and shapes and sizes.
So fun.
I've heard the saying,
you should do a thriller, a filler, and a spiller.
We're gonna go ahead and use this greenery as the spiller.
And then we've got the other little flowers as a filler.
And then the thriller are the larger flowers.
I think this turned out beautiful.
You'll have to let me know what you think.
You could use any kind of tissue paper that you want
or napkin, or my gosh, even scrapbook paper.
Let me know what you think.
Here we have another can
and I've got this three panel board from the Dollar Tree.
We're actually only gonna use two of the panels.
It's a little long for this particular project.
So the first thing we're gonna do as always
is take the label off of the can.
And all I just do is take a blade,
score down the side, and then start ripping it off.
And all you're really left with is the part
where it's got the adhesive.
And depending on what you're doing to the can,
you might not even need to do anything with that.
So here I'm gonna pull off that last piece of this panel.
I just left the staples intact.
And then I'm gonna snip the excess of the rope
and I'm gonna add some hot glue just to secure it.
I've got a book here.
This is a book that I use a lot for book page things.
I'm just gonna pull up some pages
that have a lot of words on them.
And I'm gonna start ripping them into pieces.
I like to rip the edges.
I don't wanna cut them
because that looks a little bit too perfect.
And I kinda like the rip edge look
when I'm decoupaging with book pages.
You can do that any way that you like though.
I'm gonna take my Mod Podge
and I'm just gonna start putting some on
like one little area.
And then I will add book pages.
And I like to try to work all the way across the can
or whatever the surface is.
And then I go back and fill in wherever I need to.
So I'll work around
and see if I can get it all done that way.
And if there's anything left,
I'll just tear a smaller piece and I'll add that.
And this worked out really, really well.
And as I go, I add Mod Podge over the top to seal it.
Now I'm gonna take this beautiful ribbon
from the Dollar Tree.
You could use any ribbon that you want.
And I'm gonna put a border
all the way around the bottom.
Just gonna hot glue that right on there.
And I just thought that looked beautiful.
When I get around, I'll cut off the piece
and I'll add the last little bit of glue.
And if there's any excess left, I'll cut it off.
If not, I'll just tack it down.
I did decide to do it on the top as well.
I felt like that made it look a little more finished
and just needed it, I thought.
Now I'm gonna set that on the lower of the two panels
on that hanging sign.
And I'm gonna drill two holes.
And I have a piece of wood under there
so it doesn't go through my desk.
And then I'm gonna drill the other one.
And this is gonna be how we're gonna attach this can
right to these two hanging pieces.
It's almost like planks.
If you don't have a drill, you could take a very big nail
and hammer it in and that will make your hole.
And then I kind of pushed out, it's like MDF board,
so I kind of pushed out the debris
using a little screwdriver
just to make sure the holes were big enough.
So now I'm gonna position the can
and I'm gonna figure out how much of this rope that I need.
And I'm just gonna thread it from the back,
each end to the front.
This is gonna make this very secure.
Plus, we can add a decorative element because of it.
Once I turn it over, I'm gonna make sure
when I pull up the rope that it's even on both sides.
Take the can, position it in the middle,
and I am gonna add a little bit of hot glue
because I don't want it rolling around while I tie a bow.
So I'm just gonna position it there.
That's not really the way it's being held on there,
but that's just temporary.
And then I'm gonna make a cute little shoestring bow
and just tie that right there.
And then I'll play with the bow and position it
and trim the ends till it looks exactly
the way I want it to look.
And I'll tack down any pieces
that aren't laying the way I want.
I cut up some greenery.
This greenery is from Amazon.
And I'm just gonna start filling it up.
It's gonna be so pretty.
And then I've got these beautiful blue flowers
from the Dollar Tree.
I'm gonna add those for accent.
This is just gonna be such a cute piece.
You could use any florals you want.
And that was all there was to it.
So easy using a tin can that I would have otherwise
put away or put in the recycle bin.
You'll have to let me know what you think.
I've got this little tuna-sized can.
And then I had this little house from Dollar Tree
in my stash.
I thought I would love to use this.
So the first thing I'm gonna do is score the label
on the can and then take it off.
Now, this one we're gonna paint.
So I don't wanna leave behind any of the adhesive
or paper that's left after removing the label.
So I warmed it up with my heat tool
and I'm using my little Cricut spatula.
You could use whatever you want
just to kind of scrape off the excess.
Now, once I get that off, it's still a little sticky.
So I'm gonna use some Goo Gone and rub it around the sides.
And then it leaves it a little oily.
So I always take some rubbing alcohol
and that's how I end up cleaning it.
I'm gonna use my heat tool to heat up that little heart.
And then I'll take my spatula and just kind of rub
under it gently until I pop it off.
And that way, if I wanna use the heart
for something else in the future, I will be able to.
I'm gonna add a little hanger to the back.
I thought just in case I wanna hang this one,
you could use it as a shelf sitter or you can hang it.
So I've just put a little piece of twine on there
with some hot glue and I added a piece
of masking tape to secure it.
Now I'm gonna take this aqua folk art paint.
It's such a gorgeous color.
I usually get that at Walmart.
And I'm gonna paint all around the trim
of the house with that color.
I thought the contrast with the black and white gingham
was beautiful and I also did around all of the edges.
I'm gonna paint the little tuna can the exact same color.
Took a couple coats to make it nice and solid
so I wouldn't see the brush strokes all the way around.
I've got these little moss balls from the Dollar Tree
and I'm gonna start adding them on the inside of this can.
Now you could do any kind of florals that you want
or what would be really cute is make it look like a nest
and add a little bird there.
The succulent was a little too big for this can
so I'm trimming off some of the leaves
on the back of the succulent.
Now I'm just gonna be able to glue it right in the center
and it's gonna fit perfectly.
So I'm only gonna add glue where it's gonna touch
green moss balls that I put in there already.
Now I'm gonna put a generous amount of hot glue
around the outside edges of the can
and then place it right in the center on the house.
Look how cute this is.
Oh my gosh, I love it.
That was all there was to it.
Yes, you could put a bow, you could dress it up a little bit
but I was very happy with how it turned out.
I love the color scheme.
You'll have to let me know what you think
and what would you do with this one?
Are you ready for more inspiration?
I've got another video here I think you will really like.
Click on it, I will see you there.
You are truly a blessing to me.
Bye.
