For any first-time fifth-wheel trailer owners looking for the best 5th wheel hitch! Are you new to the world of fifth-wheel towing? In this video, we break down everything you need to know about the PullRite SuperLite 5th Wheel Hitch — the perfect solution for first-time 5th wheel trailer owners!
From its lightweight design to its unique mounting system that fits standard truck beds without needing a traditional 5th wheel hitch rail kit, the SuperLite makes hitching up simple, safe, and stress-free. Whether you're upgrading your setup or diving into RV life for the first time, this video will show you why the PullRite SuperLite could be the game-changer you've been looking for.
We'll ask all the dumb questions to try to wrap our first-time 5th wheeling brains around how to choose the best fifth-wheel hitch system and why we think we found the perfect one!
⇒⇒⇒ PLEASE CONSIDER SUPPORTING US: We're able to continue to travel and produce videos thanks to the support of viewers like you! Please consider supporting us so we can keep providing engaging content from the road!
✜✜✜ ABOUT CtW: We're passionate about helping people as we live full-time in our RV. It is our goal to inspire you to begin your next adventure and to provide you with the best information possible to help you prepare for the journey!
We love sharing stories through photos, videos and on our blog. Thanks for taking the time to watch this video and please SUBSCRIBE, comment, like and share to help us help more people!
✔✔✔ SOCIAL MEDIA: Please "SUBSCRIBE" and follow us on social media:
We are currently on the way to go get
our new fifth wheel hitch
installed, which is really exciting. We
don't um we are first time fifth
wheelers, if that's what you want to
call it. We have been RVers. Um we're on
our seventh year of full-time RV life,
but we have only done a truck camper and
then a motor home. So, pulling a trailer
is brand new. Lindsay's done a lot of
research and she found a great company
that we're going to be working with and
that is uh Pullright. So, we are going
to go and we're going to get everything
installed from bottom to top or top to
bottom, whatever you want to say. And
we're going to ask a lot of dumb
questions that aren't dumb because we
don't know what we don't know until we
know to ask. And uh so we're going to
help you figure out as well if you're
new to to being in the in the fifth
wheel, if you're shopping for a fifth
wheel. If you don't know what kind of RV
you want and you're thinking about a
fifth wheel and what kind of stuff is
going to go into it, we're going to show
you that today with our friend Nick over
at Pull Right. It's going to be a great
time because literally he's going to
have the truck from from empty truck bed
all the way to putting the hitch in. And
you may also want to stick around and
watch this video if you're shopping for
a hitch or a new hitch. if you don't
like the one that you've got and you're
researching Pulite, we're going to show
you everything you need to know about
how awesome the company is and how great
their products are. Um, because we're
going to have a wide selection of things
to talk through. All their newest
technology, all the standards, all
everything that we could possibly talk
about with PullRight, we're going to go
through that in this video. Hello.
Yay. We uh How's it going? Good. How are
you? Really good. Good. Awesome. Well,
welcome to Pollite. Because your your
truck does not have the fifth wheel prep
package or what a lot of people call the
puck system, we're going to have to put
a set of rails in the bed of the truck.
So, we need an attachment point that
connects the hitch down to the chassis
or truck frame. So, we have several
different hitch rail options. I got one
that I've kind of picked for you, but if
you guys see one that makes more sense,
we can we can switch it up. This is, you
know, the really the entry level
mounting system or I say entry level,
but really it's the installation kit to
install. It's the least expensive. It's
what we call a universal kit. So, this
one we we we don't necessarily like
selling it, but some of the old school
technicians that have been doing a lot
of installs or if you're doing an
install on a really old truck frame, um
where you're drilling, you have to drill
into the truck frame to do that install.
So, if we decided to install that on
your truck, we would be taking a drill
bit and drilling through the sidewall of
the truck frame, which is something that
I don't want to do. Yeah. So, what we
typically recommend is at least a custom
kit. Custom kits are the same exact rail
in the bed of the truck. Um, the
difference is everything under the bed.
It's more of a custom cut bracket that
fits and hugs along the side rail of the
frame. Uses pre-existing holes so we can
line up our hardware. It's really
noninvasive on the truck. All we're
doing is drilling down through the sheet
metal to the truck bed. That way, we can
tie our base rail down to the down to
the bed. Okay. Now, those are great
options. That's what most RVers use that
are pulling a fifth wheel with a truck.
The custom the custom kit there. We do
have a couple of options above that. We
have what we call our heavy duty custom
kit, which is designed for heavy
applications. So, anything above 20,000
lbs all the way up to 24,000 lb. Um, in
this industry, there's not a whole lot
of testing requirements, but we hold
ourselves to a testing standard that um
makes it to where we want a heavier rail
to tow a 24,000lb coach. Now, the kind
of the premium option here is a fully
removable rail system. This would be if
you obviously you want to tow your fifth
wheel trailer, you need a connection in
the bed of the truck, but you want to at
least have the ability to have access to
a smooth bed. You know, that's great for
somebody that's a weekend warrior
wanting to load things up on on during
the week using their truck for work
because basically we're still using a
similar custom bracket under the frame,
but the you know, this would be my hands
are going to represent where the bed is,
right?
So to pull the base rail off, there's
going to be pins and clips on both sides
that we can pull out. Then the base rail
can just be pulled right out of the
truck bed. Yeah. And then you're left
with four posts that are sticking up
through the bed. Those can be rotated a
quarter of a turn and removed. That way
you can go from having a fifth wheel
hitch in the bed to having nothing in
the bed. That's really nice. Yeah. So So
that's what I'm hoping you guys will let
me install on your truck is this one
because we have a a test fit that I'd
really like to get done on it. Twist the
arm. All right.
Thought you were giving me a fist pile
there. I'll make it work. We'll It'll be
a good fit for your truck. I think it'll
work system. And if it's Yeah. It's what
you're leaning toward. You're not I
think it'll be popular, too, cuz that's
like the biggest complaint I hear about
people with the rail system. Yep. They
want to be able to use the bed and then
it's hard to, you know, slide stuff out.
So, the reality is is um not a whole lot
of people know these rails are an
option. You know, if you want a
removable fifth wheel hitch, there's
limited options out there. This is a
great system because it gives you four
points of contact to the frame. Yeah.
Which is a much more stable platform. It
very much mimics a fifth wheel prep
package and it's something we've had on
the market for gosh almost the whole
existence of Pullright. It's a super
rail system. Yep. Something that we've
had um and sold several or lots of them
over the years. The other thing is we
still have the hardest part of getting
that hitch out, which is lifting
everything out and pulling, you know,
your physical weight. Fifth wheel
hitches are known for being pretty
heavy. Um, now in today's world, we've
designed a whole new line of products,
what we call our OEX line, which is
designed for fifth wheel prep packages
or lightweight, easily removable
hitches. They've been pretty popular.
So, now we're releasing what we call our
ISRX, which is an industry standard rail
version. So, it's a lightweight hitch
with two different hitching options and
we can fit it onto the base rail. So,
that's what I'm hoping to put in your
guys' truck as far as your hitch goes,
which we got a couple of options that
you get to get to choose from on that.
So, this is
a version of this I'm going in the bed
of your truck. The base anyways is going
to be designed to fit onto this base
rail that I'm going to put in the bed of
the truck. So, we have the base rail and
then the hitch will sit and it just pins
right onto the base rail using pins that
slide through the base rail. It's
already got a pin in there. So, it's a
real simple product, high capacity. It's
24,000 lb. It's going to tow anything
that you're going to need to tow. Yeah.
But let's talk about hitching options.
This has the standard tolerate hitch
plate, but we got two options. So, I
want to actually go over to our OEX over
there where I have both of them so we
can look at the two hitching options.
Okay. All right. So, when we look at the
OEX line, um, obviously you guys are
getting the ISRX, which fits on industry
standard rails, but this one's designed
to fit into the different fifth wheel
prep packages. So, Ford, Chevy, Ram, we
have an OEX it's going to work in. What
makes it the same as the ISRX is that
we're using the same components for
hitching. You can either use a standard
hitch plate or the ball and funnel. The
standard hitch plate is more more of a
traditional type fifth wheel hitch where
you're going to lower the trailer down,
scoop the trailer up, the kingpin gets
wrapped around by the jaw and it l
latches and hooks onto the king or hooks
onto the coach. Um, follow a series of
safety checks and it's a nice safe good
product that's going to work for you
without any issues. This has been on the
market for, you know, the existence of
fifth wheel towing. This is a type of
fifth wheel hitch plate that's been used
similar to the way a semi is going to be
towing their trailer down the road. The
other option is something that we've
created several years ago, which we call
our super light, which is a ball and
funnel connection. So, it makes the idea
was to create a product that was easier
to hook up, lighter weight, and created
a tighter connection. Um, the reality is
when you're hooking up to a kingpin, a
cylinder shaped pin and fits in that
opening and the jaw has to be able to
operate, it's typically a little
clearance in all fifth wheel hitches.
So, how can we which that little bit of
clearance when you're towing a big heavy
trailer can turn into a little bit of
chucking. So, how do we get rid of that?
How do we eliminate that as much as
possible? So, that's where the um
Superite was born. Essentially, the
Superite is a funnel system that gets
put in the bed of the truck. This piece
gets put on your fifth wheel coach, gets
mounted onto the kingpin box. It's a one
sizefits-all. So once that gets put on
your trailer and this item's in the bed
of your truck, your hookup process is
really easy. We just lower the ball into
the funnel. Now we machine that ball and
we machine and we use a special material
for that funnel. So it's a very tight
connection between the ball and the
coupler. You're getting a zero chucking
situation between the the ball and the
funnel there. You slide this
on and remove these two bolts here. Then
this slides onto the kingpin and we can
choose to either put the ball in front
of or behind the kingpin itself in Y if
you need it. Yep. And then you tighten
down the or you put those bolts back in
and tighten up these set bolts and
that's going to essentially clamp this
onto the kingpin box. The one for the um
ISR or the OEX and ISRX is a little a
little stronger, a little more stout
than what this one is, but uh it's
essentially the same thing. It's going
to drop in. So you're you will have to
take that back and you will have to put
that on the coach. Um you're going to
need a couple of tools which we can go
over what you need for that. But it's a
real simple simple task. Yeah. So the
Rolex would require a what's essentially
called a lockout kit that prevents it
from prevents that Rolex from having too
much movement. That way it allows for it
basically maximizes performance with
that pin box with this particular fifth
wheel hitch. So, the OEX, like the ISRX,
is just like um it's nice because you
can get your base and then you can pick
what hitch you want, which allows you to
choose how you're going to hook up to
your coach. Um how you're, you know,
what that all looks like for you. When
you have a when you're allowed to pick
which connection you're going to use, um
it allows you to kind of sit back and
think what works better for you. That is
more of your traditional hookup. If
you've ever towed a fifth wheel before,
um that makes a ton of sense. uh you've
already accustomed to how that operates.
You know how high to get the trailer. Um
you know that you want to hook up
relatively straight with your coach. It
makes it a lot easier. You're more
accustomed to like travel trailer towing
where you have a um where you're just
lowering the coupler over the ball.
Well, the super light makes a lot of
sense because all you're doing is
putting the ball over the coupler and
lowering your jacks on your coach. It's
a real simple idea and it works really
well. You're getting zero chucking.
you're getting an easier connection. And
because we're getting rid of the hitch
plate and the rocker, that's a lot of
material, a lot of weight. Um, this is a
lot lighter. Get your base down to right
about that 75 80 lb range. What do you
find most people prefer? What they know
or it's 50/50. I mean, I'm asked that
quite often. I could be talking to down
in Tampa, the Tampa shows, good example.
while I was talking to customers back to
back and one absolutely said, "Well,
gosh, why would anybody want anything
but that?" Um, then the next person
says, "Well, gosh, I'm all about new
ideas and that that looks really cool.
It makes a ton of sense." Um, I think
that that that makes I'm going to get
that. The other variable though is the
um if you had a short bed, we'd be
talking more about the flexibility of
this product as well because it's a uh
obviously it's best for an 8ft bed. Uh,
fifth wheel towing is easiest on an
eight foot bed, so you can put your
weight right over the axle. Or if you
had a short bed, we'd be talking about a
sliding fifth wheel hitch. But in some
cases, if you have a short bed truck and
a relatively narrow trailer that has
some nice cutouts on the corner, you can
get away with a product like this that
um because what we're doing is we're
actually has the ability, the hitch has
the ability to offset back in the bed of
the truck a little bit. So, when we put
this together, we can either assemble
these plates to where the um rocker arm
is situated directly over the rear axle
of the truck or we can assemble it like
this one is where the plates are
reversed and it's all shifted back. You
can see there's a set of hardware on set
of weld nuts on both sides of the hedge
that allows you to essentially move your
connection point back 4 in. So, if you
had a short bed, that would mean an
extra 10° a turn roughly. Now, the other
advantage with the Super Light, and this
is why it it's a little bit more
popular, is because if you had a short
bed truck, this adapter on your coach is
going to give you an an additional three
and a half inches of offset, bringing
your trailer 7 12 in back from the tra
from the truck, which is going to get
you the maximum turn you're possibly
going to be able to get without putting
a sliding hitch in the bed of the truck.
So, it's a product that would work good
if you had a short bed, um, but it's
going to work really good cuz you had a
long bed. It's really boils down to your
personal preference and choice. The
learning curve is going to be easier on
this one. Um, this one you'll have
people say, "Well, gosh, what what is
that thing when you're at the campsite?"
I mean, that happens quite a bit. So, it
really is boils down to personal
preference. It really does. Um, I like
Super Light just because the hookup is
nice and easy. It can I think it's cool.
I was leaning towards that one, but the
and that's what I was hoping. Um, the
other thing is with the a standard hitch
plate, there's an unhooking process that
has to be followed with and if you don't
follow it, you could struggle unhooking
the the hitch. You basic, it's simple.
You just need to chalk the back of the
wheels and back your trailer firmly into
the wheel chalks. And what that does is
it relieves any pressure on the jaw.
That has to be done in every case, no
matter the fifth wheel hitch. Um, so
you're backing into that coach,
relieving pressure on the jaw, and then
you can pull the handle. It's a pretty
simple process, but if you're in a
uneven terrain, a weird situation, um
some people can you can struggle with
that. It could be a little more
difficult. Whereas with the super light,
it it is really simple because it
doesn't matter where that pressure is
being applied, that ball is going to
come out of the coupler. Um it's just
might shift or move a little bit. So,
you guys are brand new. Regardless of
what you do, um I think this probably
makes more sense. It's just simple and
easy. Yeah. And it looks like the design
You make it so your margin of error, as
long as you get somewhere on that, it's
naturally going to slide. So, you've got
some room for error. Yep. In terms of
whether you're here or there, just You
had made the comment that uh you know, a
goose neck would be a little more
difficult to hook up. And you're
absolutely right. But a gooseeneck is
easier to hook up because you're
lowering it down. If you could take
those the best of both worlds and put it
together, it's basically what we've done
here. the ease of the gooseseneck
connection, even though it's not a
gooseeneck, it is a fifth wheel hitch,
but it is it's also elevated up in the
bed of the truck. Um, the negative is is
you still have a hitch when you unhook.
That hitch is going to weigh right
around 80 lbs. So, it's easy enough to
where, you know, the two of you guys
could probably get it out pretty easily.
Once you lower the ball in, comes with a
remote latch handle. You're going to be
operating the electrical jacks right
here. Plugging in your electrical. Um,
rotate that and it goes in and now
you're latched. We wanted to create a
really simple latch that was intuitive.
Um, it's in, it's latched. When it's
out, it's unlatched. So, you pull it out
and twist it either direction and it
holds it out. After you lower your coach
in, you're just going to put it in and
then store away your rod maybe in that
fishing pole thing. Yeah. So, so if
you're coming into this maybe having
pulled a bumper pole Mhm. you might be
okay
with that because it's traditional and
it's what you've most commonly seen. I
would say if you come in pulling a
bumper pole, you've you're already that
saying, "Wow, that makes a lot of sense
because that's what I've been doing at
the campground." Anyways, it's just back
behind the truck where I can't see. Now,
we're moving it into the truck. Okay. If
you were towing fifth wheels before, you
were, you know, spent your career as a
trucker, um, you're absolutely going to
pick that one. I mean, if that in most
cases, uh, this one is, you know, it has
proven itself over the last few years.
Uh, so it's a product that we're seeing
more and more people gravitate towards,
but it's still relatively new technology
compared to the classic fifth wheel
hitch. I know they're both your
products, but it's like why even talk
about that anymore? Because this
we felt that way when we intro when we
initially introduced it. Um, I will say
there's been more resistance to change,
I'd say.
the that fifth wheel hitch plate is a
great fifth wheel hitch plate. There's a
lot of people that buy Pullright
products because of the latch design. We
have a really tight connection. It's a
single piece latch. Um so I can
understand people wanting to continue to
use the same latch they've used um over
the years and a lot of I believe a lot
of people buy hitches based upon
recommendations. Um and those
recommendations of course if you're
asking somebody that's been doing it for
30 years they're likely going to
recommend something like that. Um, if
you look at it from a clean perspective
and and look at the pros and cons of
each, um, this is what really makes more
sense. The ball and funnel, um, we
believe is going to be the best option.
And the nice thing about this unique
connection, it's the only unique
connecting fifth wheel hitch, um,
between a truck and a trailer that's
available for OE or all the OE
platforms. So, all the fifth wheel prep
packages and an industry standard
version. So, and a ball mounted version.
We have a full line of this type of
connection. As we're looking at ease of
of hooking up, all the things that I'm
worried about, how do we back up, which
we can't back up until we even get
hitched up, I'm thinking of all the
little stressors. And for me, just being
able to have that you line up, get
within that margin of error, and then
drop the trailer down and you're good to
go. Fifth wheel towing, especially if
you've never done it, can be stressful
initially. Um, we try to create products
that take the stress out of that. That's
kind of the basis of the automatic
sliding fifth wheel hitch. If you had a
short bed, we'd be talking about that
because it takes the stress of hitting
your cab completely out. Um, you don't
have to worry about that. This takes
the, you know, this does take the stress
of hooking and unhooking. One of the,
uh, problems that people do run into is
you get in a hurry hooking and unhooking
your coach. Um, if you hook up and
you're, you know, it's raining, it's
you're just in a rush, right? You don't
follow your normal order, you know,
procedures. It's easy to shouldn't say
it's easy, but it it's easy to skip
steps, right? If you skip steps when
you're hooking up a 15,000lb trailer to
a truck, you could run into major
issues. Um, drop trailers are definitely
a thing with a standard fifth wheel
hitch, whether it's ours or anybody
else's. Um, the kingpin has a a slot or
that hitch plate has a slot that the
kingpin slides in and you're relying on
the mechanism inside there to latch on
the kingpin. So, there's a series of
safety checks that have to be done. As
long as those safety checks are done,
you'll never drop your trailer. But what
if you know you hook up and you know
that as soon as you hook up, the dog
jumps off the car and goes running and
you lose track of what you're doing,
right? It's easy to come back to the
coach and say, "Okay, we're hooked up.
Let's go." And skip those safety checks.
If you do that, you could drop the
trailer. It happens to people. um this
product. I'm not saying you could never
drop the trailer, but there's no slot
that the kingpin can slide out of. Once
you're you're hooking up, that ball is
dropping a good ways down into that
funnel. Of course, we do need to latch
it. If you didn't latch
it, you're once you latch it, we know
for a fact that that ball is not going
to come out of the coupler. So, it's
harder to drop a trailer. I'll never say
that it's impossible, but it's much much
much harder to drop a trailer with a
product like this. Also, that hooking up
is happening right here when you're
running the jacks. You can see it happen
that you're you're finishing up the
hooking up from the cab of the truck and
you're just feeling that impact as you
hook up. So, this is a little smoother
and easier for sure. Yeah. Since we did
not have the puck system in our truck,
the first step was to install a custom
base plate on the chassis, ensuring a
solid connection to the inbed ISR super
rails.
I told him it was okay cuz it was cute.
Then we drilled four small holes in the
bed for the connection points between
the frame, allowing us to secure the
super
rails. The PoolRite ISRX Superite hitch
requires some assembly before mounting
it to the super rails.
My conservative thinking is I know we're
going to be making some turns that 90
degrees aren't good from everything I've
read because of actually the wear on the
axles. Yeah, it's it's best to not do
it, but you'll have situations where
you're going to have to. I mean, it's
it's just going to be and so I'm not
worried about hitting the truck, but I
am worried about when everything's
pivoting over over this. Mhm. And then
also when we're making a turn into a
place, I know there's a couple places
we're going to turn almost 90 and go
downhill at the same time.
How this responds to that situation,
like knowing my limits, in other words,
so I don't break stuff that I don't want
to break. Well, and every coach, every
setup is a little bit different. Um,
what's nice about this, we can custom
tailor it, get it the way we want it.
Um, it'll be a lot easier to go over
that when we, you know, have a coach and
hook it up even though it's going to be
really, really cold that day. Probably
still do some turning clearance and make
sure that everything's going to be good.
Um, yes. I mean, those are good
questions because there are situations.
There are pin box and truck combinations
where that that can be an issue,
especially um, if you were dealing with
a short bed and you were trying to
create all that offset. That's going to
be a bigger issue. with this, you know,
the pin box hitting the bedside. We can
rotate the adapter around and basically
bring the trailer a little closer. Um,
the negative of that is when you hook up
your pin your your tailgate's probably
going to be pretty darn close to the
front of the underside of the trailer.
So, it's going to make it to where you
probably want to hook up at a straight
in a straight line. Um, all coaches are
different. Um, trucks are obviously got
Ford, Chevy, and Ram, but they're all uh
dimensionally different. So, we need to
figure out what that um how that trailer
is with this particular truck. And
I'm going to set this up in the lowest
position when I build it because I think
um four-wheel drive truck. Um you know,
probably want a nice low hitch anyways.
Trailer's going to be or the truck's
already nice and tall. Yeah. Um what
alliance is it that you're getting? 23
ML brand. It's brand new. Yeah. So, it's
not I'm not extremely familiar with that
last. Yeah. No, they just came out with
it. It's a 2025. So, you know, the ride
height of that, you know, we'll get
we'll get it all set up. I think it
replaced the 22 rear kitchen or
whatever. Well, is it a half ton towable
or a light? They say it is, but really
shouldn't. It's 105 is the max. That's
that's the case. The reality is is half
ton towable. Most people are using a 3/4
or one ton. Well, the problem with it is
a lot of half ton towable coaches, they
ride a little lower. So, when you then
have a 3/4 ton truck that's riding
taller than the half ton. Now, a lot of
times you'll be a little nose high, so
I'm not surprised if that's what you run
into the most. But we'll run this in the
lowest position. That way, we got a
fighting chance of being as as level as
possible, even with a heavier duty
truck. With the custom base plate
secured to the chassis, we are now able
to assemble the entire hitch system. It
starts with securing the ISR Super Rails
with four points of contact. Then, you
set the Super Light ISRX hitch to the
rails and secure with another four
points of contact. To remove the hitch,
you follow the same steps in reverse and
have access to your entire truck bed.
We can put lawn chairs and stuff up
here. Absolutely.
Yep. And when you're towing, you have to
keep in mind the pin box on even
terrain. But yeah, you should be able to
you probably fill the whole truck bed up
to here and be good. Yeah.
In terms of that angle. Yeah. should pin
boxes typically come up. Even if you
were going down some weird angle, it's
still going to
any any of our lawn chairs
that or the aluminum fold out tables or
quick grab stuff. Yeah, we can just
start with
So, as you can see, we went with the
super light because this is honestly
this is the simplest
um easiest worry-free.
I'm overly conservative, overly worried
about all the things that could go
wrong. And this eliminates all of that
for me. I just think it's way too
simple. The idea once this is mounted
onto a kingpin to just simply go back
and slide in and it locks into place so
simple. You know it's locked in. There's
no way to high hitch because you know
it's locked in and uh and then it's
really easy to loosen and pull right
out. So, I think I think this is
phenomenal. I'm excited personally. I
I'm going to feel safe. I'm going to
feel comfortable and uh we're not gonna
we're not going to have to worry when it
comes to actually towing the trailer.
Backing in somewhere. Well, that'll be
another worry. But for now, this is
pretty awesome. So, our fifth wheel
hitch install is done, but because we
chose the super light and we don't have
our fifth wheel yet, we still have to
install the kingpin adapter. Um, so once
the RV is finished on Friday and we get
a time of when when it will be basically
um the trailer will be moved to where we
are, um, we will let Nick know when he's
going to come out and install there's an
the kingpin adapter and then because we
have the U Kurt Rotolex pin box, it
needs a special lockout plate that
basically keeps the adapter from moving.
Um, so he's going to install that for
us. He says it's super easy. It takes
about 10 minutes and then we can hitch
up our brand new trailer and take it for
a drive. So that'll be in just a couple
of days. And super excited to uh learn
how to tow and uh back up a fifth wheel.
It's going to be fun. Yikes. Yikes.
Welcome back. We are picking up where we
left off. I am about to go and meet with
Nick again. Nick is coming out to where
the fifth wheel is and he's got to
install the adapter that's going to
allow us to put that into the hitch.
Once Nick gets it all set up, we're
going to we're going to hitch up and I'm
going to go putts around the parking lot
and uh and see how that works out. Try
to use my mind over the biggest concerns
I have such as how to pull this trailer
and backing up into spots or what if I
get in a tight squeeze or the gas
station issue of pulling up to a pump
and trying to get out when there might
be crowds or or whatever. So anyway,
first step is let's go get Nick and
let's get that trailer uh all figured
out and set up so we can hitch up. With
the fifth wheel on hand, the first step
is to install the kingpin box isolator,
which will keep the kingpin adapter in
position. This is only necessary if you
have a Rotolex pin
box. Should just slip right on. Might
have a little paint on the kingpin we
have to address, but should just slip on
pretty easy. If I had to have somebody
tow me for whatever reason, that just
slides right off. Yep.
Are there torque specs on these bolts or
tight as tight? Um, there is torque
specs on it. Cross bolts are going to be
75. You can see how tight that was
getting on there. Yeah, it's a pretty
tight fit. A very tight fit.
Some cases if the pin has some rust
buildup on it, you got to clean that up
a little
bit. You really got to press it on
there. And these cross bolts going to go
finger tight for now.
What are the six bolts on either side
that
are? So
those these six bolts are going to once
I tighten them down, it's going to, you
know, push this down and we'll create a
little gap here. Okay. And tighten up
into the surface of the or bottom skid
plate of the pin box. And it creates a a
clamping effect where this is
essentially clamped onto the king here.
Gotcha. We'll go ahead and we'll tighten
those up and get them all torqued to
spec. Is this your first venture up into
northern Indiana? It is last probably at
this time of year. So, right now I'm
just making sure that it's nice and
square and straight, which it appears to
be. Let's start tightening these up.
Like putting on a spare tire and cross
tightening. Yep, exactly. this side.
There we
go. Now, we can set this up to where the
kingpin or the ball's forward or behind
the kingpin. We're going to start off in
this situ in this setting. Um, this is
relatively short. I think we're going to
have plent This will give you extra
clearance between the back of your
tailgate and the underside of that.
Okay. You know, your storage part looks
like we'll need it.
Although we have a long bed truck and
we're not worried about the trailer
hitting the cab during turns, we still
decided to install the super light hitch
in rear position to give us a few extra
inches of clearance between our tailgate
and the trailer. If you have a short bed
truck, this is also a great alternative
to a sliding
hitch. Just like that. So,
it's ready to hook up to the super
light.
My turn to work. First time hooking up.
This will be uh this will be fun. I'm
glad Nick's
here. All
right, lubrication points. I always
suggest spraying the the dish, the
funnel. That way when you drop the ball,
it's going to want to go in. And then
we'll hit the ball. Get the whole
outside ring of that ball. And that's
it. It's all it really needs. So do that
before hooking up. So because this is
your first time hooking up to this
trailer, let's look at a couple of
things. We know that, you know, we still
have this much distance before that ball
gets to the coupler. We have Do we have
that much distance between the tailgate
and the front of the trailer? Yeah, I
think we have plenty of room right now.
Yeah. Um we went ahead and put the ball
forward to the kingpin to give us a
little more. That way you can hook up at
different angles. That probably will
never be an issue. You'll probably be
able to tow with your tailgate down, but
let's look at it. And not that I'd ever
recommend that. I'm just saying, yeah,
um, you know, you'll be able to hook up
at any degree of angle. But let's let's
check all that out. Let's first uh just
back the truck up to where the ball is
somewhere over that dish and lower the
coach. Pretend to be Lindsay for the
moment. All right. Keep coming. About
another foot, another 6 in. about
another three to
four right
there. Okay. When you're hitching up,
all you have to do is lift the front of
the trailer, back your truck under,
lower the front of the trailer, and then
unhitching is a reverse. Lift the front
of the trailer, pull the truck out, and
then level your trailer back out. So,
it's nice and
simple. So, let's lower the ball down in
the funnel.
It'll slide itself in. It sure will.
It's going to actually just push the
truck a little bit or move the
suspension a little bit. It goes in
really nicely.
So, and then the once it bottoms out
now, you just go ahead and keep going.
You could just retract all at this point
if you needed to go about your stuff,
but you know, just basically retract the
front jacks
down. I'm nervous.
She squatted a little bit.
Now, something that you're going to want
to be get in the immediate habit of
doing is right after you've done that,
you want to latch in shut. So, that's
where we'll get the remote latch handle
in there and just tip it and make sure
it goes in. So, now it's set, ready to
go.
[Music]
Look at that. So, just like that, you're
you're hooked up. So, now it's just a
matter of uh hooking up your electrical.
Yeah, you can click the gate up at this
point.
Now, the other thing that we need to
address is the breakaway switch, but
what it does, it activates trailer
brake. Should the truck and or the the
uh trailer and tow vehicle become
separated, you need to just be able to
hook it somewhere to where that pin box
can rotate all the way around and not
pull it out. So you need to have enough
slack in it. Looks like Right. Yeah. So
now the ball is all the way down. We can
physically see the pins through. It's
very This product is really easy to tell
when you're latched up. You can see all
pieces of the of the puzzle from right
here. So, we know it's latched up. Sure,
you could do a tug test where we lift
our jacks up and hold the trailer brakes
and pull forward. Um, just to ensure
everything's hooked up. But, at this
point, we're hooked up and and ready to
tow. So, let's go ahead and pull the hub
jacks the rest of the way up. Little
clip that we've got all sorts of
clearance so they can unhook the
electrical. Um, do a little light test
on your coach. Make sure that your
sevenway is transmitting your everything
you need it to and then we'll go from
there. So now plug the seven way
in. Once it's all the way in, the door
kind of locks it. So yeah, this is going
to be
perfect. You don't think I need to
secure it in any way? No, just good.
It's the perfect length really for that
setup. Pulling it for the first
time. Runny nose.
Got a big boy in the back of my
truck. Grateful Nick is
here above and beyond service.
You're never going to hit. You can cut
your wheel and drive in circles, but
you're never going to hit. Awesome.
But go ahead and kind of cut to the left
side. I'm going to have you do a
full drive in a circle. Okay.
It's going to be a lot easier than
you're worried about. I can tell you
that with this truck and trailer.
I can feel it. I mean, I feel the weight
of it. Oh, yeah. It's back there.
Okay. If you think you can do a U-turn,
do a U-turn.
That's as tight as your truck and
trailer's ever going to get in front in
a straight line. Yeah.
Take a look at that. Take a look at
everything. Yeah,
you know, this is this is a this is a
fairly tight I mean, this is a really
tight turn. You're almost you're at
probably 70 or you're probably 80° or
better. Yeah. Um the one thing we got
going for us is everything's flat and
level. So, you know, your pin box,
everything's relatively level. What we
need to think about is what happens if
you're on uneven terrain. The trailer's
pitched. So, that's where your clearance
is over here. You know, you have seven,
eight, 10 inches of clearance even on
your your box cover there. Um, plenty of
room from the cabs. You got a long bed.
So, no, no real concerns as far as
clearance goes. Because we did put the
adapter forward to the kingpin, we're
going to look at the back of the pin box
here. Um, you can see that there's never
going to be an issue with that pin box
getting close to the bedside. Um, maybe
the electrical box maybe, but I I don't
even think that's going to be uh
anywhere near it at any point in time. I
don't think so. Um, and of course, we
would have to be at a pretty Yeah,
there's there's clearance all day long.
Well, you want to do some towing and
actually put a couple miles on it with
me in the passenger seat. You're down?
Yeah, I'm down. Let's do it. I'm going
to grab my phone out of the car now.
Okay, I'll pick you up. So, we're we're
doing a little bit of a stress test.
That's what I like about having Nick
here is uh making sure that the things
that I worry about, he's already ahead
of the game. So, we put it at not quite
a 90° turn, but you can see with our
long
bed, there's about a foot in between the
trailer and the cab of the truck. And
then the clearance again underneath
here, the kingpin's never going to come
and actually hit the side of the truck.
So, that's good.
Um, we will address the wiring issue if
we can make a longer wiring harness, but
this is
uh this is about the worst situation it
could be in on flat ground. I'll see
what will happen if if we were making a
turn with this. Not quite at the same
degree, but if we were making a turn
where we had to go up or down, because I
can imagine some places where in Baja
we're definitely going to make a turn
down. Uh, just want to make sure that uh
that I understand what's going to happen
and kind of what my limitations are. I
am super conservative. If you know
anything about following us, I don't try
to break anything. Uh, if Rich, if
you're watching, I know you watch all of
them, you're laughing right now, uh, cuz
you're the guy that would take me out
and make me break everything just so I
know one, how how my limits are, and
two, how to get myself out of those
situations or how to fix things. But,
uh, for now, I'm going to take Nick's
advice on everything. He is the pro when
it comes to the hitches. I feel pretty
comfortable right now. Haven't done any
backup, so that's why I'm gonna go grab
Nick and we're gonna go take some
maneuvering. I can feel it compared to
when it wasn't hooked up, but I love
that the truck doesn't really It's It's
a big truck. That's what That was our
plan. Big truck, little trailer. Yep.
Which
is a lot of sense. I mean, most
campsites I wouldn't necessarily be at
that 90°.
No. They try to make them angled for
you.
want to hit the road road or pull around
here. Completely up to you. You want to
hit the if you want somebody on the road
with you when you or if you want to come
around here and check your turns and
just feel yourself out around some
poles. I'm 100% down for whatever. I'm
going to pretend like pulls a gas
station. I think that's a good call.
So, I'm pulling up to the gas pump and
this will be the farthest out that it
is.
So, I get my gas
and that's that front post. So, if I
want to swing to the left.
Yeah, swinging to the left's going to be
pretty easy cuz I can see it. You can
see it. Your blind side's over here,
which makes it a little more difficult.
I'll do it both ways at some point.
Yeah, I'll go right first. Going right
what what you
typically going right is a little tip
little harder, especially if you have
tail swing to worry about. you don't
have much tail swing to worry about, if
any at all. But let's assume you do. Um,
what you'll want to do is, especially if
you have a limited area up in front of
you, Yeah. you want to try to start
getting heading that direction, you
know. So, I usually would, you know,
let's say that the, you know, you have
to cut it by the time the the parking
spots end in a checkers. Let's call that
a wall there. Yeah. Um,
but you can actually start going this
way all the way to the to the right side
of those lines. You know what I'm
saying? That way you can because you
have cars over here, but you can get
close to them before you cut it that
way. Um, that way you're avoiding this
quick swing of the trailer. It's pretty
simple. It's especially with this setup.
I think he'll
be.
So, in my opinion, if there's something
that makes
your that makes your your trailer
difficult or your setup difficult is the
length of your truck
for me. Yeah. I think the length of
your, you know, because it's an 8ft bed.
Yeah. I think it makes it a little more
difficult.
Just take a look really quick just to
have an idea of
Yeah. Not even close. Yep. You probably
You probably have You probably have no
tail swing,
honestly. Here, let's do something. Do a
do a U-turn. Get yourself parallel to
that wall right
there. Not too close to it, but let's
say line up the left side of everything
with this concrete to to cement
transition down there towards the end
like this.
Yep. So now once you're go ahead and
stop right now come to a complete
stop. Cut your wheel well remaining
stop. Cut your wheel all the way to the
right. Okay. 7 and 3/4. What I want to
do is actually see if you have any tail
swing whatsoever to worry about because
this is going to be the worst possible
scenario as far as producing tail swing
and do what you did. Yep. So now what
you just look down the side and know
that if you had an imaginary wall here,
that trailer, the amount that the butt
end of that trailer moves that way is
the maximum amount of tail swing you
ever have to worry about. Okay?
And that's if you This is literally
trying to hit that pole, right? We got
that wheel cut really hard.
None.
If the line is the wall that never touch
the line, right? So maybe 12 in. Does
that mean if you have anything closer
than 12 in is when you need to sweat. If
you got a foot away from it, you're
never going to hit it. Worst case
scenario on the right turn. Yeah. And
that's left turn. It's just you're going
to the opposite side of your trailer.
Yeah. I just won't see that. As long as
you have a foot of clearance.
So where you're going to have where you
have to worry is you're going down, you
know, a really tight road and in, you
know, eastern Pennsylvania where the
roads are real narrow and you're you're,
you know, really tight to everything and
and you know, you're in two lanes of
traffic and you're in the right hand
lane, you got to go make this really
tight, you know, and that car's this far
from you. I mean, if it's a foot away,
you're good. If it's six inches away,
you got to worry. Yeah. So, um, that's
an unlikely scenario you're going to be
in. And that's where I just stop and
wait for the cars to go by and exactly
get my get the space that I need. So
that's I think you know knowing what
your boundaries are, knowing what your
worst case is so you don't
precision will be leaving those boxes
there. I think I can do that. That's
going to be your challenge because
that's going to be your your side.
So, I come
up tires past where I want to pivot back
into the
spot. Or is it the butt of the trailer
that needs to go past the spot? I would
even get the butt of the trailer past
the
spot. So, that's where I have Lindsay
saying, "Hey, forward or whatever."
So yeah, that's probably a good a good
starting point there, I would say. Um,
actually go forward a little bit more.
Forward a little bit
more.
Okay, so now putting it in reverse. I
mean, the hardest part in my opinion is
trying to figure out which way to turn
the wheel to get the butt end of the
trailer to move. So, a secret that I if
you uh put the hand with the bottom of
the wheel, move the hand move the h your
hand the direction you want the butt end
of the trailer to go. So, I want the
butt to go this way. I want to go this
way. Yep. So, I just move So, usually
when I'm driving, I'm driving up here.
But when I'm backing up, I just move my
hand to the bottom of the wheel. And
when I want the, you know, move my
trailer that way, I just move my hand
that way. Um, with a fifth wheel, when
you back up, once that angle begins,
it it gets it takes a little bit for the
angle to begin. That's why you're
pulling up past it. Okay? But once it
starts going, you then have to you don't
want to keep making it more. You've got
to then um So, what you're going to do,
you're going to start off pretty
aggressively backing into it just to get
those wheels to to just get this trailer
to start moving. But then you'll start
straightening up your truck at from
there. So aggressively meaning like
turning the wheel. Yeah. Turn the wheel
a good amount. Yeah. I I would maybe go
all the way to the all the way to the
lock on it even. Okay. And watch the
wheel cuz right now you can't quite
gauge whether you're going to shoot into
the snow or past it. But once you start
moving you'll be able to see. You'll see
what's going to happen. And don't forget
to watch the front end of your truck too
while you're doing this
stuff. I should have gone in a different
site.
Okay. So, right about here is where
you're starting to get to where your
truck's going to really get a tighter
angle between your trailer. So, I would
start um go straight with your truck
almost like or straighten your wheels
out a little bit. Yep.
Not all the way, but just to
lessen
Actually quite a bit straight.
Straight. Yeah. So now even turning
around and looking is a good idea even
because you can kind of see. Oh yeah.
And then be off just a little bit. Yep.
So you're going to want to
uh try straight back out and hit it
again. So we know that we turned maybe
too hard into it. So now, just don't go
all the way to the lock of the wheel and
back up again. And just try
to lightly point it that
direction. Going with it. Keep going
with it. So once you get the angle, keep
following it around. Keep following it.
Still cut. Keep keep that wheel cut to
the right or the left. If you cut it
real hard to the left to the Yep. to
follow that around to try to straighten
your truck and trailer up. Even harder.
Hard hard.
And you can adjust that pretty quickly,
right? But you're still you're still off
a little bit.
So, the disconnect process is super easy
on this. Once your, you know, trailer is
to the site where you want it, just open
the
[Applause]
tailgate
and up your remote latch handle and
release the pin. You can do this with
the jacks still up before you touch
anything. Um, then we want to make sure
we lower the jacks down, drop the feet
to 13 and a half and and run the actual
jacks down. So, we'll do that. Um, and
just lift the front of the trailer off
and pull the truck out. All right. So,
Nick was a huge huge help and hopefully
some of this helped you out. I don't
know what I was able to put in to the
video based on um the tips that Nick was
giving me and we couldn't fly the drone.
Lindsay's not here. Um, I didn't want to
try to figure out how to put the drone
up in the air and then have it just
record. It's freezing cold. I think the
battery would die and it' probably fall
out of the out of the air like a shot
goose. But anyway, um, so I don't know
what made it, what didn't make it, but
what's my task, what is my challenge now
is I've got to back up and rehitch. I'm
going to do that with confidence right
now, which means I'm going to leave the
camera away because I don't want to be
thinking about is the shot good or could
I get a better shot or did I show this
or show that. I just want to make sure
that I take my time and do it correctly.
Which what I really love about this
super light hitch is you can't mess it
up. You really can't high hitch. Either
you back it your truck up so that the
ball goes into the funnel and it when
you lower the trailer, it's fits
perfectly down. It won't go any lower.
The bed will then the truck bed will
then sink down a little bit. Uh and then
you just pull one little latch and it
locks. I love that there's no um false
hitching or or the high hitch where uh
we've read and we've heard about people
who thought they were hitched up and
then they go to pull away and they're
not actually in the proper position. So,
um I've got a lot more confidence in
doing this myself because it's it's the
best one on the market. It's the easiest
one to do. I'm not saying I want to do
this on my own all the time because I am
going to have to get out. My backup
camera does so good of a job. But um if
you don't have a backup camera, you got
to have that other person or like what
I'm going to do today. I'm just going to
make a move and see where I am and then
make another move and see where I am and
just try to fit it all together. So, I'm
going to go do that right now. My gosh,
if it wasn't so cold, never got above
freezing today, but if it wasn't so
cold, this is a beautiful, beautiful
sunset. I guess that's how it is up
north. Maybe that's what keeps people
living up here uh in the winter. But uh
so I did more than just hooking up. I
went decided I'd spend the next hour or
so running myself through every ringer,
every scenario I could possibly think of
um for what I know we are going to get
into in Mexico. And uh what I don't
know, I don't know. But I was able to
get back into the campsite a couple
times. I tried to do three or four
different times. I did four times. I
tried to do three in a row and then I
gave up. We're some of the first people
to use this equipment and uh they just
want to take a look and make sure
everything's snug and fit and uh then
they're going to start whipping them off
the shelves to you guys. So, uh, we're
hoping this goes really, really well. So
far, it's been a phenomenal experience
and, uh, Pool Right's gone above and
beyond. Alliance had already rolled out
the red carpet for us. Uh, great,
wonderful, wonderful company. But, I
wanted to show you the trailer all
hooked up and ready to go for its maiden
voyage. For now, here she is.
[Music]