This video is sponsored by Bamboo Lab.
So, so many of you guys have been asking me for a new Mac mini project,
and I honestly wasn't sure what to do at first.
But then after I got my hands on one, well, some things became very obvious.
All right, that was a fun little warm-up project,
but let's finally do what we've all been thinking about.
I mean, this thing is so tiny, so tiny.
So we got to be able to create a portable setup around it, right?
I mean, people are definitely trying to.
They're carrying these things around with portable monitors and keyboards.
And I get it.
It's one of the most powerful computers you can get at this size and price tag.
So of course, people are going to try to use it portably.
So let's see what we can come up with.
Here's what I want in the portable setup.
I hated carrying around the keyboard for my other portable builds.
So this time, I want to incorporate the Apple Magic Keyboard into the design.
These are super lightweight and thin.
Newer ones have a fingerprint reader,
but the older models you can get for pretty cheap on the second-hand market.
Next, I found this cool monitor with VESA mounting points
that's almost the same size as the keyboard.
So it's perfect.
It's definitely on the heavier side as far as monitors go,
but I like that it can be used with just one cable from the Mac Mini.
And it's touchscreen.
The black enclosure doesn't really fit in with the Apple products, though.
So let's fix that.
So these are all the ingredients.
And my design will need to hold all of these pieces together somehow.
Let's brainstorm.
What are my constraints?
Well, the monitor and the keyboard are around the same size.
So those should be put together.
No, no, no. The keyboard's too light and the monitor is too heavy.
The whole thing would tip over.
Well, the Mac Mini is also heavy.
Maybe you can prop up the screen with it.
Then the keyboard can just fold upwards to close.
Yeah, but now the ports on the back of the Mac Mini aren't accessible.
True. And the on button, too.
You won't be able to turn it on like this.
Well, what if I turn it on its side?
This way, the ports are now accessible.
And I can just turn it around, too.
So then the on button is, too.
The Mac Mini is sticking out now.
The whole thing feels bulky.
Let's tuck it under the monitor, then.
This is more ergonomic with the screen higher off the table.
True, it won't tip over now, but it's even bulkier.
If only the screen was lighter, then it won't tip over so easily.
The monitor is too heavy.
It's gonna keep falling back.
This monitor is too heavy.
The keyboard is too light.
Wait, we can just make the keyboard heavier.
If we weigh it down with the Mac Mini, then the whole thing won't tip over.
Yeah, but nobody can type like this.
No, weigh it down beside the keyboard.
I think this is it.
I can work with this.
Since this is gonna be a pretty large design,
I needed a larger 3D printer.
So luckily, BambooLab's new H2D came at the perfect time.
This is without a doubt the most advanced 3D printer I have ever owned.
And the heaviest, too.
This whole thing just feels so smart.
If you need ventilation during a print, vents automatically open.
This light shows you the progress of your prints.
Perfect first print.
But the dual nozzle system is the real star here.
You can just tell so much engineering went into this thing.
Now, since my design will require a lot of supports,
I'll be trying the dual nozzle system with some dedicated support filament
for those large overhangs.
Let's see how it does.
As expected, the supports were super easy to remove
and the surface looks great.
Now, just a few more parts.
Now, I don't like how this plastic body sounds against my desk.
So good thing the H2D is not just a 3D printer.
And last but not least, always remember to date your work.
Yeah, the H2D is also a plotter.
This thing is truly the best all-in-one DIY tool.
So this is my new portable Mac Mini setup.
This design ensures that everything is properly secured
without losing any key features.
The monitor's cable runs securely through the body underneath the keyboard.
The Mac Mini's exhaust and fan intake are completely unobstructed
and so are the ports at the front and back.
Thanks to the Velcro strap, the Mac Mini is held securely in place
while remaining easily removable.
It uses an industrial torque hinge to support the monitor
and its friction is adjustable.
Once dialed in, the screen stays firmly where you set it.
This monitor has pretty decent resolution and colors
but it's really its aspect ratio that I love.
The low profile makes it perfect for focus tasks like writing.
I feel like I'm typing on a typewriter when I write my scripts on this thing.
The touchscreen is also surprisingly responsive
but without multi-touch support, it's unfortunately just not very useful.
It's basically just tap and drag.
It's not bad for drawing
but the monitor will bounce a bit when you push on it
so this design is definitely not optimized for that.
I also don't like the way the screen closes against the plastic body of the design
and since I custom painted this monitor's enclosure,
it's definitely not a very durable finish
so I don't want the paint to scratch over time
as it opens and closes against the body.
So to take advantage of H2D's dual nozzle system,
I'm going to try to use it to print a TPU embedded design.
I usually don't do this
because printing with two filament can really increase print times
due to the need for, you know, pooping after every filament switch
but with dual nozzles, that's no longer a concern.
These soft pads now allow the screen to close and sit gently against the body
and since opening and closing the screen was such a key interaction,
it's wild how much more refined and polished the whole design feels
just with this subtle improvement.
Now, everyone knows that the Mac Mini's built-in speakers are awful, right?
Well, interestingly enough, this monitor also has built-in speakers
which I was pretty excited about
but in a shocking twist, these are somehow even worse.
Like, they're so bad.
Here's the Mac Mini's speaker
and here's the monitor's.
So yeah, I won't be using those.
I know this isn't technically fully portable
because it still requires a wall outlet
but most of the places I work on the go
like coffee shops or whatever, usually have outlets
so I don't really mind
but while I was designing this, I did get some ideas
for how I would make this whole setup battery-powered.
It would definitely be a heavier and bulkier setup
but if you guys are interested,
I would love to make a video exploring that concept too.
Let me know in the comments.
And also, I created a version of this design you can 3D print
on a smaller printer like the X1C or A1
so if you want the 3D printing files for this design
and the Mac Mini iPhone dock design from the start of this video
for most of the MacSafe iPhones and Apple cases,
consider joining my YouTube channel membership
and supporting my work.
In the next few days,
there will also be exclusive membership content
for some of the behind the scenes
on how I made this video,
what I learned during the design process
and detailed tutorials for how to 3D print,
assemble and build your own portable Mac Mini setups.
So hit the join button on my profile
to learn more about my membership community.
Anyway, I've always wanted more tools
like a laser cutter for example
but I can't because of the size of my apartment.
There's just not enough room for so many machines
and that's why I'm kind of falling in love
with BambooLab's new H2D.
And the thing is,
usually when a tool is capable of doing more,
it becomes a lot harder to use as well
but the H2D kind of breaks that pattern.
It can do so much
and yet it's somehow still so easy to use.
It's so quick to switch between the different tool heads
and it just feels so smart.
The way it can auto detect and calibrate itself
for whatever it needs to do.
I have never owned a laser cutter before
and yet after unboxing this thing,
I began laser cutting stuff within 10 minutes.
Just as how BambooLab made 3D printing
so easy and accessible,
they're now doing the same with plotting and laser cutting.
Except the crazy part is,
it's all happening with just one machine.
I've only had the H2D for a few weeks
but it's already pushing my imagination
towards building things
that no longer feel like prototypes
and more like polished products.
I'm not just working with 3D printer anymore
but I now have like a full personal manufacturing hub
capable of just so much more.
If you wanna learn more about this amazing tool,
check out the links below
and huge thank you to BambooLab
for sponsoring this video.
And with that,
that's pretty much everything.
Let me know in the comments
if you guys would like to see a battery powered version
of this Mac mini setup
or if you have other ideas for me,
I'd love to hear them.
I hope you guys enjoyed this project
and yeah,
thanks for watching.