***SUBSCRIBE Right Now to Experimental Aircraft Channel (It's FREE) and get exclusive offers below!
Please visit our Channel Sponsors here: *Dynon Avionics (Avionics for Experimental, Certified and Light Sport Aircraft) https://dynonavionics.com/
**STOL -IT Aircraft (Building custom Experimental Aircraft and offering Builders Assistance on your personal Aircraft Kit) https://www.stolitaircraft.com/
Fan of The Experimental Aircraft Channel? Consider supporting over on PATREON here: / experimentalaircraftchannel
Join the NEW Facebook GROUP where we encourage "Say it With VIDEO" build updates on YOUR current project: / experimentalaircraftchannelgroup
And we are on INSTAGRAM too! / experimentalaircraftchannel
WE HAVE A PODCAST! Audio only can be found on iTune, GooglePlay and Podbean. Fill VideoPodcast (V-Podcast) on YouTube by searching "EAC Aviation Podcast" or click: / @eacaviationpodcast9668
ELAA Aviation, the gyrocopter you can pop the clutch to get into the air quickly like a
helicopter. These rotocraft are the business class of gyrocopters, zero to 125 miles an hour capable
and are available globally for someone just like you to go fly. Out here at Oshkosh 2024
ELAA Aviation and Herbie walked up to me out on the field and said hey I got something new to
show you. So we're going to walk around their booth right now. All right so first explain to
everybody what this is. It's a gyrocopter right but what's the unique features about it? So this
is the only gyrocopter that's now being mass produced that's also a vertical takeoff gyroplane.
So every other gyroplane that's out there you know you have to have a three four hundred foot runway
to take off on and then you know they land in 30-40 feet. That's the great advantage of a gyro
is the short landing but this one is a vertical takeoff gyro. So you need zero runway all you do
is you it's and there's no collective or anything else it's not like a helicopter where you have a
collective and everything is so complex. All you do is you press and hold down a button in the
cockpit as your pre-rotator will pre-rotate the blades to about 500 rpm and then when we let go
of the button it changes pitch of the rotor and the propeller simultaneously to lift us up and
push us forward so that we're gaining that energy in our rotors immediately. All right so if you
could explain to everybody typically in a helicopter a lot of times you have to have a forward motion
and some of them are so heavy you even have to kind of rotate around to get enough lift to go.
This you're rolling in a couple a couple feet. Yeah this from if it was if it was sitting here
right now and I could pre-rotate and they let me I could pre-rotate high enough to where I could
take off and get over the Garmin booth right there. It's it's pretty impressive. So we'll show a clip
of that here in a minute but we talked off camera and I kind of explained it described as such as
like popping the clutch. Yeah exactly it's it's like popping the clutch on your truck to get the
thing started but it uh it jumps up and it goes. All right so that's a really really unique feature
about this gyro. Let's talk about the mechanics of it. What's it powered by and what type of style
transmission do you have and so forth? So we're not really using any sort of transmission. What
it is it's a it's a gearbox that's driven by a shaft that's coming off of a pulley attached to
our attached to the to the prop shaft. So we get a shaft that will go to a gearbox and off the gearbox
is going to come to a this it's not a bendix it's actually a belt driven system. So on the belt driven
system uh we can pre-rotate that allows us to pre-rotate to you know 500 rpm where everything
else like all the other gyros is like a car starter where you have a ring gear and a bendix
where it's mashing up against each other. But when you're going to the super high rpms
it's not good to have two gears mashing up against each other and putting that much pressure onto a
onto a ring gear. So we found the way of getting the longevity out of our system is by going and
a belt system. And this is again powered by what? This is the Rotax 916 so it's 160 horsepower
and 137 horsepower constant as your max continuous. The main advantage that we're
seeing over the 916 over the 915 right now and we have the 915 in our other in our other machines
is the fuel economy. The we're finding that the 916 is burning a gallon and a half to two gallons
less fuel at the exact same speed in rpm that the 915 was. So overall for the extra few thousand
dollars it's costing us to put the 916 in the machine. Customers and everybody else will be
saving money later on down the line especially in resale value because this now has a 2,000
hour tbo instead of a 1,200 hour tbo. Makes a huge difference. Okay so moving on to kind of
like the the fly or how you fly this. Can this be flown from the front or rear or where do you
where do you sit? It can be so if single pilot you're going to be flying it from the front
while you're getting your training there is dual controls in the back. So you have your trim,
pre-rotator, push to talk, rudder pedals, throttle and brake are all all in the back seat as well as
the same thing in the front seat. We're using the Dynon Skyview HDX system and right now we're
working really close with Dynon to build this cockpit out for us and the next thing that we're
doing with Dynon is building the autopilot for it. So this will be a fully capable autopilot machine
in the near future. As of right now ELA has over 700 gyros flying of the Eclipse and Evo model
which is the model's predecessor to this and we have had the best safety record out of any
gyrocopter company in the world. We have over 700 of those models flying and we have zero fatalities.
Six or seven accidents and all of our accidents have been you know pilot error accidents.
So what would you transition from into this? Like what would be your primary trainer or do you have
to train in a gyro essentially? Most of the guys who are getting into the gyros are the same guys
that are going to be getting into like the carbon cub style stuff. You know they want to land and
they want to take off short but the advantage of this is that you don't have to be as cautious with
airspeed because you're in a gyro. You can't stall it, you can't spin it and it has all the great
flying characteristics of an airplane and you have the cruise speed of you know a light sport
airplane. We can cruise at about 117 miles per hour but you have a lot of safety benefits
that makes it you know a much safer aircraft to fly than your typical fixed wing. Sure sure and
what let's talk about operational as far as like you just mentioned this thing was pretty much
VTOL but if you were to not use a max performance takeoff what would your typical rollout be
and climb out and so forth? So what we've designed the system for this system to do
is if you don't want to do max performance you could still pre-rotate to 200 and you can do a
regular takeoff or you can pre-rotate to 350, 400 and make your takeoff real short and you're not
being as hard on the system for a jump takeoff if you need it. Like if you're on a regular runway
and you just want to do a short takeoff just because it's fun you can still take off in 30,
40 feet and just by pre-rotating to a lower determined speed and the cockpit in this has
changed zero from any other gyro. You can't tell in the cockpit that this is a jump takeoff gyro
because everything that we do is all fly-by-wire so it doesn't change a thing. Hey everyone I want
to pop in real quick and just kind of give you a little motivator to work on your project if you
have a project and if you don't maybe consider getting in touch with one of the manufacturers
and buying a set of plans or a tail kit or something just to get going. We have you know a
lot of time coming up here soon over the holidays that you could be inside in your shop working on
an airplane but in the meantime let's give a big shout out to our sponsors. I'm gonna pop in here
real quick to talk about our sponsors as you know I can't do this all on my own we got to have
somebody to help fuel that truck. We try really hard to work with sponsors that provide a good
service and a good quality product so let's talk about those guys right now. Dynon Avionics at
dynon.com the premier provider of glass panel avionics systems for experimental and light sport
aircraft and visit our website at experimentalaircraftchannel.com for new videos and easy
to navigate playlists and so much more. All right Herbie so this is in fact a kit but it's only sold
as what? We only sell this as a builder's assist because we believe that every aircraft is better
when you have a factory rep putting it together with somebody that's what makes us you know
unique and why we have such a good safety record and we have zero mechanical failures because
everybody who has touched one of these gyros before or put together our kit has been put
together with a factory certified rep so it gets a factory check mark before the gyro is
delivered to you so you come to so you buy the gyroplane you come to Okeechobee
we'll put the gyroplane together with you in a builder's assist it usually takes about a week
week and a half because everything is composite and all and pre-manufactured everything is pretty
much just bolt together so like your painting and everything else will be done in Spain unless you
want something special we have a paint shop in Okeechobee that will also do you know special
requests for the customer or anything that you know they can you can dream if you can dream of
it we can build it. So give us an idea of where you would start in the process of the builder's
assist like what sub-assembly or assembly would you begin with day one? Day one so day one it's
actually going to look a lot something something like this excuse me Paolo sorry day day one your
gyro is actually going to look something like this it's got you got your body and then you're
going to have a frame that's going to go together and we'll be mounting the engine and all the
wiring harnesses and everything else are pre-made so everything's just you know pre-plug and play
so we'll be mounting the engine and then the next thing that's going to happen is you're going to
be mounting the tail and the tail feathers and then there's a little tail wheel that goes on
and everything's already pre-wired so all we're doing is plugging and playing as it as it goes
along the next thing we'll do is we'll go into the cockpit and we'll start assembling our flight
controls so I can pull this up so we'll go into the cockpit and we'll start assembling our flight
controls and you know doing all of our check marks running our fuel lines and everything else
and and hooking up all the systems that come with the gyro and then we're installing the seats and
interior after that's all happening and then the final thing that we do is we come up to the cockpit
and we install the dine on and you do everything with that system so it's really easy builders
assist because everything that we have to do has to come out of a mold so it's not you know you're
not riveting sheet metal together or anything like that another thing that makes this gyro unique
is most gyros don't have a monocoque fuselage they have a steel frame that's running through
the gyro this body is 100 carbon fiber there's no steel that runs through this body at all
so it makes it a super strong rigid body and every single part of this body is a structural component
so you can stand on it and jump on it and it's not going to affect the gyro at all
and all of our fuel tanks and everything are also integrated into the body so it's not like
something that we sit there and piddle around with and they're polyethylene fuel tanks they're
good for 30-40 years you never have to worry about anything rotting out of them
all right so how do you get into one of these kits what's the lead time and the price point
so we're going to be starting out at 168.5 for a kit that includes the kit the builders assist
registration fees shipping from spain and the dar with five hours of flight training so you know
when we tell you it's 168.5 realistically 168.5 is what you're going to be walking out
of the door with your gyro and that's with a 915 916 is going to go to 179.5
jump takeoff is going to be starting at 240. so you can go to you can follow us on instagram and
you can go to our website elaaviation-us.com or you can go to the elaaviation
instagram or you can go to rotor rebels on instagram and you can dm us and we'll tell
you more information about the gyro as well it was very educational speaking with herbie during
air venture at oshkosh 2024 and i hope you learned something today as well thanks to
our patrons over at patreon for your support and ted 1010 in the co-pilot status if you
are interested in showing us some fan support look us up experimental aircraft channel over at
patreon.com and if you have an interest in working with us to create more original aviation content
drop us a line at info at experimental aircraft channel.com thanks for watching this week's
episode remember to like subscribe and hit that bell so you don't miss a single episode