Ever wondered if you can scale up your desktop sign post and still keep it craft show friendly? We did too — so we tried it!
In this video, we take our tabletop display stand SVG and scale it to a 4-foot portable porch post using half-inch plywood, LightBurn, and our trusty laser cutter. 💥 Spoiler alert: it’s lightweight, collapsible, easy to pack, AND stable enough to hold a 16" sign! 🙌
You’ll see: ✅ How we adjusted the tabs and slots for thicker plywood ✅ Why we chose Foxy Hues Paints for weather protection 🎨🦊 ✅ Real-time assembly and wobble test ✅ Our material cost breakdown and bundle pricing ideas ✅ Craft show tips for transport and display
💡 Perfect for crafters, makers, and small business hustlers looking to elevate their booth setup (literally)!
🛒 Grab the cut file: www.kandgmakeit.com 🎨 Foxy Hues Paints: Weather-resistant. UV-resistant. Crafter-approved. 🦊 Join the Make It Mafia for early access, files & support!
Let us know below — would YOU bring this to your next craft show? 👇
FYI: We are not professionals, and we don’t claim to be. This is what we found worked for our project. Yours may need a little different approach. We have just enough woodworking skill to make some basic furniture. Safety first!
FTC Disclaimer: This is not a sponsored video. All opinions are genuinely our own. This post may contain affiliate links and we earn a small commission if you make a purchase after clicking on my links. It doesn't cost you any extra. Thank you for your continued support to keep Making It!
Can we do it? Can we take our desktop
sign post and turn it into a 4 foot tall
portable porch post?
What is up? Welcome back. Do you like to
do it build it or make it? So do we. We
got asked, can I take that file you have
for your tabletop displays and scale
that up to 4 foot tall so it'll hold a
16 inch door sign? And I said, the short
answer is yes. And the more we thought
about it, the more exciting that idea
seemed to be. And you guys, if you're
going to craft shows, I know that this
seems like a cool idea to you, too.
Because if we can scale this, then these
will be so easy to make because you
don't have to lug around and go get
lumber. We can cut it right on our
laser. It'll be easy to take with us to
the craft shows because they're
collapsible. We can take this whole
thing apart and now we can take it with
us to the craft show. So much lighter.
This 4x4 gets real heavy real quick. And
customers also don't want to tote these
around at the craft show, right? And
they can take it home with them a whole
lot easier. Plus, we'll have it
collapsed, shrink wrapped, and they'll
just take that bundle with them. So,
we're so excited to try today and scale
this desktop post into the 4ft post and
let's see if it works. Well, now after I
said yes, I then started thinking, well,
at 4t tall, you'd have to adjust all the
tabs and slots. Yes, he's the mechanics
started. That'll be kind of easy. But
will the base be able to support the
16-in sign if it starts flapping around?
Like the 10-in sign, it's fine. It's
good to go. But if you're going to scale
up the weight and the height on this
thing, will it tip over? Will the feet
hold? Will it get
wobbly? There's a lot of questions I got
about the mechanics of it. So, let's
find out. That's what we're going to do
in today's video. We're going to scale
it, paint it, and let's see how it
works.
Step one, we're going to gather all of
our supplies. We're going to use some
halfinch plywood. I'm not sure of the
kind, but I'm not going to use the MDF
because in our experience at 4ft tall,
over time it'll start to lean, bow, and
start to sag. With the door hanger
hanging on it and the changing
temperatures, I think it'll sag over
time. But I think half inch should do
the trick. I think so. I found this one
in the warehouse. Still has the spider
eggs on it. Yay. Glad you brought that
up like
that. And we're going to use our Foxy
Hughes paints. Now, we thought about
staining this, but I think over time
again, if you're going to leave this on
your front porch and it's going to
possibly get exposed to the elements,
our Foxy Hughes paints with the outdoor
properties, they're UV resistant,
weather resistant. It's really going to
seal this sealant. Yep. Yep. It's really
going to seal this half inch ply. And I
think it's gonna be best long term with
this paint on it. So, we're gonna go
ahead and paint ours when we're done.
And I think that is it. That is it. Step
two, we're going to download and scale
our SVG. But first, I need to know how
thick my material is. Because we're
using the exact same file, I'm just
changing the tabs and slots. But I need
to know how thick the material is for my
tabs and slots. You can see that this
file has tabs or little feet that are
going to plug into the base, the slots.
So, here's your tabs. Here's your slots.
And you're going to need to adjust these
to account for the halfinch material.
You're going to do that for the base.
You're also going to do that for the top
piece here. It also has tabs and slots.
And that's it. Right. Those two pieces.
Yeah. And they slide together. And they
slide together. Right. So the base is in
this is in two pieces here. So you're
gonna have to adjust this for the half
inch material as well. We're going to
measure the material in a couple of
places because it looks like there's
some variance. It looks like there's a
little bit of wave. So I'll measure down
here at the
end.
466. We'll hit it in the
middle. 463.
We'll round it to
0.48. That should account for a little
bit of paint. That'll give us 200
hundths of an inch down here and
hopefully enough room up here where it's
a little bit thicker. First, we're going
to stop over at our website and download
our SVG. So, we'll go to Shopall
Products, laser cut ready digital
downloads. I'm going to select my file
that I want. We'll add it to the cart
and I'll check out and then I'll receive
an email and I'll unzip the file. Then
I'll jump over to LightBurn and I'm
going to import that
file. So we'll select the SVG. Now Kim
told me I can pick this file, this one
or this post. I like this post the best.
So first I'm going to ungroup
everything. Whoops. Control Z. Going to
ungroup
everything. Ungroup. Ungroup. Ungroup.
Now I should be able to select all of
these. All right. What else did it
catch?
Delete. All
right. Delete. I'll catch all these
guys.
Delete. All right. I have my two posts
left. These I'm going to group group
these guys. And we'll group these guys.
She wants this curvy base. So, I'm going
to grab these. We'll group them. And
grab these and we'll group them. We can
get rid of the square base.
Delete. Now, we'll line this guy up down
here. We'll group these guys so they
don't move.
Group. I'm going to drag them over.
We'll grab everything and we'll align
center. With everything selected, I'm
going to make this 47 in high. That'll
give me like an inch wiggle room, half
inch on each side to cut this out. So,
we'll say 47
tall.
Bam. We'll turn it on its side by
holding shift. It'll turn on its
45s. All right. Now I have to adjust all
the slots so that they'll fit that
0.48. So we'll ungroup
everything.
Ungroup.
Ungroup. We'll grab this tab. We'll make
sure the aspect ratio is turned
off. And right now you can see that this
slot is like 68. So we'll just make this
point
48. Done. And we'll grab this
one. Make it
48. And I'm just going to
copy 48.
Copy. I'm going to come up
here. I'm going to grab these two
guys and make their
height
048. I'll grab these two.
I'll grab them this
way. Now, here we're going to make the
width 48. And we'll make the
width 048. We'll group these in case I
move
them. And we'll grab
these and group those.
I'm not going to group these guys yet
because these tabs are too long. If this
inside was 6 some point8 68 something,
then these tabs are double that. So, I'm
going to draw a
box and I'm going to snap it up against
the base right there. You see it? It
tried to
snap. Oh, let's do this real quick.
Let's make sure these are even. Going to
grab these and group them. Going to grab
these and group them. Going to grab both
of these and we'll make sure that
they're aligned. Right. Yeah, there you
go. Now they're
perfect. Now we'll ungroup these real
quick.
Ungroup. Now my
box. So my box, I want the tabs to go
through two pieces of half inch and it's
actually 48. So, I'm going to go ahead
and make the tabs n6. Actually, like
0.95, just a a shy under 96. So, as I'm
adjusting this, I can watch the
width. And we'll just come
in
96. Say
9 three here. I'll just make it
95 95.
I'm going to grab this guy again and
make sure he's snapped up against
there. All right. Now, I'm going to grab
this guy, this
post, and I'm going to come over and I'm
going to edit the nodes. So, I'm going
to click edit nodes. Now, since this is
selected, I can only edit the nodes on
this. So, I'm just going to drag over
and grab those nodes. I'll zoom in a
little bit. I'm just going to use my
keys, my arrow keys to make it bigger or
smaller. And once I get close, I'm going
to hold control and use my arrow keys.
And I can really fine-tune it. All
right, that one's
good. So, we'll come down to this one.
We'll grab this next post. We'll edit
the nodes. We'll zoom
in. I'll grab just these nodes. Use my
arrow keys.
Oops. All right. Pretty dead
on. So, I can get rid of this box now.
Delete. I'm going to swap this one
around. Let's group these again. Group.
We'll group these again. Group. I'm
going to flip this one
over. Let's flip this one over.
Drag it down
here. Drag this
up. Now, I can fit all of these on my
board, but I can't fit them all on my
canvas. So, I'm going to cut the base.
I'm going to cut these out, flip it
around, and then we'll cut the
base.
So, my score, I don't care. 180 and 30.
But I know I use
10. So I know I use 10 millimeters per
second and 50% power for quarter inch
MDF. So I'm thinking if I just
do like
seven 7 mm per second and 50% power on
my cut, I should be
good. All right, I'm going to select
these and
send. All
right. All
right. You can get it out. I should have
done a test card first. We hate plywood.
That's another reason we hate plywood.
Like, see how it didn't come through all
the
way, but in other places it came through
a
lot. Yeah, here it came through really
good. And then right there, it didn't
really come down through at all. All
right, we'll have to cut this out. So,
for my second cut, I'm going to move
these out of the
way and I'll pull these
down and I'll flip my board around. But
I think I'm going to bump up my power to
70. So, I'm going to go 70 mill 7 mm per
second at 70%
power. All right, let's send this
Step
four, now we paint. But first, we need
to pop out all of our pieces. This is
why I hate plywood the first pass. Yeah,
I should have run a test card, but I
just figured I'd divide the speed in
half. It's twice as thick. I'll divide
the speed in half. He knows better. He
knows better. Always run a test card.
There are a couple places that it didn't
come through the plywood, like strands
of wood. So, I'm just going to cut it
out using just this razor
blade. Cut it
out. Then, we're going to paint it. I
think we're going to paint it black.
Yeah, we thought we'd keep it easy. This
is so that you can take it apart, put it
together, and it really won't show any
scuff marks. So again, we're going to
use this paint because it does seal this
wood and it's going to be protected
outside because it is UV resistant,
weather resistant. So I think this is
going to be the best option for this
plywood. So when I bumped up the power,
it did come through easy. I just uh I'll
run the test car next time. Well, you
know how it is with
plywood. Sometimes the glue spots are
there, sometimes they're not. Sometimes
they feel like a nut and sometimes they
don't. This is more warped than Oh,
yeah. This was definitely more warped.
Mhm. I'm going in.
I
go. Step
five, we're going to bring it all
together with a little bit of Starbond
just for the foot. just for this little
ring piece to sit on the foot piece. So,
we're going to glue this and we'll just
slide these pieces these pieces together
and then plug them in the little slots.
It is taking everything I've got not to
test assemble this. This is going to be
like real life. Is it Is it going to
work or not?
Now, you can glue this. You can nail
this.
This is just to get some of this wide,
largest section off of the ground and
just have a little bit of a foot
touching the ground. Keeps air moving
under it. That and it's probably a
little more stable than having that flat
part all one big flat part with no
pebbles underneath it or anything. All
right. So, it's the slot is in the top
of this one and then the bottom of this
one. All right. Let's see. Moment of
truth. This is it right here. Whoa.
Whoa. Don't get squirly now. We haven't
practiced this. Look.
You got to keep it straight. You got to
keep it straight. You got to keep it
straight. My end's straight.
There we go.
All the way down. Okay. Okay. That's
pretty tight. Yeah. So, this tab should
be two pieces thick.
Drop her
head. Oh, she's
tight. Oh, she's real tight over here.
Oh. Oh, but it's going in.
Great job.
Yeah, I'm glad I accounted for that that
paint. I mean, look how tight it is.
Okay, hold on. So, we can set it. I'm
just gonna set it on my little table
right here.
There you go. Let's hang a hang a sign.
Hang that mermaid.
Test cut Tuesday. Okay. So, just so we
know, this is two full layers of MDF and
two layers of a mermaid tail. This is a
heavy one. All right, hands off. Go for
it. Let's see. Oh, yeah. All day long.
Look at that. I think that's plenty
stable enough.
Do the old whack
test. Oh, yeah. There you go. That's
what I'm talking about. Straighten that
up. All right. What's it look like? All
right. Yeah. Let's see. Let's see. Let's
set it on the table. Rotate it. All
right. We'll rotate it. I think it's the
wide feet there that really give it the
stability. Nice base. Good base. Good
tight fit.
Look, now you can or let's put it on the
ground. I want to see how tall it is.
Okay.
All right. He's shorter than a little
shorter. I think the other one's
probably closer to five. That was a
full-on fence picket.
So, that's cool. But this one is what's
going to really interchangeable one.
Mhm. Oh, that's a light one. Look how
beautiful that is. That's what I'm
talking about. So, what would you sell
this for? This is a half a sheet of
plywood. We got everything on a half
sheet, right? Yep. Everything was on a
half sheet. Both pieces, both standers
plus the base. Three layer base here.
So, I think that's a that's great use of
your materials. It looks like a sheet of
plywood right now from Lowe's is about
$62. So, you've got about
$31 in the post itself. And a little
paint, a little time on the laser. I
think you could sell this as a bundle.
This is how I would do it. Sell it as a
bundle, just like the tabletop version
as a bundle. Yes. Sell the sign plus the
stand for maybe 120 is what I'm
thinking. With the
interchangeable with the interchangeable
sign. Um Well, with the interchangeable
that would be a little bit more because
that's going to come with other things.
Yeah. So, it's just a regular sign. 120.
I think that's a great deal. Yes. And
then they know they have the stand.
They'll want to come back for more signs
that they can hang on. Plus, they can
hang this in. They can put this inside
or outside. So, I'm just super excited
about this. I really think this is
great. Yeah, I love it because this is
easy to collapse, throw in the back of
the trailer. Like I said, I could
probably pack 40 of them in and that
would only be like what uh it's a half
inch. Well, I think you can mount we
could shrink wrap this whole thing
together and just bring them as kits and
just keep bringing them have them
labeled, make them look nice already.
You can have some unfinished, some
painted in black, and some unfinished
because people might want to paint this
post to match their shutters. So, if
you've got a door, a teal door, and
maybe you want to do your post in teal
to really coordinate that, I think I
might bring light stained, dark stained,
black, and some raw. Let them do it.
Yeah, since they can assemble it
themselves. Yes, that's such a good
idea. Yeah, I'm excited. I knew it was
going to work. I knew it was going to
work the whole time. You know who else
knew it was going to work? The Make It
Mafia. Big thanks to the Make It Mafia.
We love you guys. That is the best
community over there. We have free
files. This file will be will be up
there. I'll put the modified cut file up
there. Don't forget to Oh my goodness.
Really? Really? And I'm in. Don't forget
to join us for the K&G Jamberee June 6th
to the 8th. It's a Friday, Saturday,
half day Sunday. Can you name all the
sponsors while I'm balancing? Yes. X
Tool, Eon, Lonear, Houston Acrylic, CMBB
Acrylic, uh, Riley Black, Monarch Pine.
Who' I miss? Who is it? Uh, ProColored
Logo Jet. Logo Jet is a premium
sponsor. I can't wait to show you. Oh,
and Foxy Hughes. Whoa.
Can't forget our Foxy Hughes paints.
Look at this thing.
Should be able to sit outside and take
the weather. I'm about out of time. I
got to go adjust the settings and pump a
couple of more of these out. Let us know
down below. Are you going to make one?
Will you be able to take one to the
craft show with you?