Easy DIY Flowing Waterfalls Table Top Moss Grotto

Aquaspace & Terrarium Designs
32 followers
As you know, I thoroughly enjoy working with moss and making small, detailed projects. I figured starting off 2024 with a fun project like this was the way to go. It combines common elements like Dragon Stone and Moss to create something unique and special. In fact, it’s probably one of my favorite small moss projects that I’ve done in a long time. I also think it will be a great piece to have in the background of build videos on the studio's counter. What do you think? Let me know in the comments and enjoy the video!
Learn More in my Blog
https://www.serpadesign.com/blog
#moss #waterfalls #serpadesign
As you know, I thoroughly enjoy making tiny nano projects that test my patience and abilities.
In this one, I'll show you how I made an incredible self-watering moss grotto using basic techniques,
rocks, moss, and other accessible materials. A proper vessel or container to work in is always
essential. I had this round acrylic tray on hand, which was perfect for the task.
Of course, I also needed a light. Naturally, I couldn't just use it though. It requires a base
This scrap piece of wood from the waterfall edge terrarium coffee table was the best option I had
on hand. I traced the container's shape onto it, along with an offshoot for the light itself.
I loosely cut it out with a jigsaw, and sanded around the edges to refine the shape.
The light is designed to be secured with a bolt from the bottom, so I created a countersink on
the offshoot and a hole to mount it through. Then I gave it the old Shosugi bond wood burning
technique. Completely burning the outside with a torch, followed by a light sanding to remove
surface char produces an amazing product. This of course matches other elements in the studio,
where it will rest on the countertop. Although probably not needed, these felt pads will protect
that from being scuffed. After installing the light and adding the tray, you can get a fuller
picture of what I've been creating. I think this looks incredible, and will be the perfect
foundation for an intricate nature design. Now that I have escaped dojo again, I can easily
access materials and test concepts before moving to the actual project. That's especially helpful
here because of how easily acrylic scratches. Anyway, I've envisioned a cave or grotto of
sorts from the start. Dragonstone was the obvious choice because of how easily it stacks to create
detailed, cohesive structures. Well, easy one compared to other materials. The process is
still quite tedious. Joining smaller stones to the sides of larger ones will produce overhangs
and facilitate the look I'm imagining. However, they don't stay on their own. I tried to wire them
in place while I experimented, but it didn't work. Instead, I'd have to take a slow and
methodical approach, working directly on the final design, one stone at a time. I set whatever I wanted
to link up, using other stones to stabilize them while I mixed up a two-part epoxy. This will be
one of my best friends throughout the build. Pressing it between the stones easily and
That said, there's always a catch. In this case, the epoxy has to cure for around 30 minutes before
I could move on to the next. I knew that if I had any hope of producing lasting results,
I had to take my time and trust the process. I'd place a stone, carefully step back to check
placement, mix up epoxy, and hold my breath as I pressed it between contact points. That said,
once the epoxy cured between steps, it was extremely satisfying to pull away the anchoring
rocks and observe the overhang taking shape piece by piece. Till this point in the project, I've
really just added small pieces which are precariously hanging off the side. Adding a sludge
run will stabilize those and create a unique feature. However, something I had to consider
is that all of this will line up differently in the container itself because the sand is uneven.
It'll have to sit level, and to ensure this would be the case, I decided to attach it outside of
the dojo. That was the plan, at least. When I tried, I didn't like how short it was without
the sand lifting it up. I quickly devised a solution, though. I moved everything back to
the dojo as it was before and applied the epoxy. After it cured, I moved it to the table once more
and situated smaller stones in the front and back to level it out. Of course, I epoxied these in,
and now the foundational scape is complete. It looks awesome in the tray as well, don't you think?
Unfortunately, I can't just go and use it, though. There are too many gaps that won't allow
water to flow. I situated rocks in these areas and utilized expanding foam to waterproof the
remaining void space. About 10 minutes later, I pressed down the expanded areas and scraped
off excess. No need to reinvent the wheel with water, either. I simply attached a vinyl tube
to a small pump, dropped it into the dish, filled it with water, and gave it a test run.
It worked, but the water was really ripping through. I adjusted that accordingly.
Additionally, I wanted the flow to begin at the top of the largest rock. I had to break a piece
off the front to make that happen. That's better, but it still looks a little wacky and is much
louder than I want. I don't know about you, but that sound would drive me nuts if I hear it longer
than I have to. Java moss and additional stones are probably the easiest way to dampen that.
I placed the moss within the flow of water to dial in the chaos. I also added a rock in the
bottom to minimize dripping. The tubing is too visible as well, but it's an easy edit.
I drilled holes through the rock and locked it in with stainless steel wire.
This allowed me to achieve a seamless appearance without the need for excess components.
Another element that will make this concept possible is moisture wicking fabric.
Chopping it up into manageable pieces and situating it in areas with access to water
creates an ideal growing surface for moss. I'm not sure how well you can see it, but this section
is becoming saturated over a few minutes time. Now moss will grow in a place that would otherwise be
dry. Although I've used java moss already, I wanted more texture and color. It's freezing
outside right now, but I was able to find a few varieties that will work perfectly for this.
I just rinsed them off to remove debris and they were good to go. Again, the fabric alone is an
ideal environment for moss to grow. For me, the moss part is always when the vision begins to
truly take shape. And that couldn't have been more true for this one. The combination of fabric and
moss made it possible to mimic an actual mini landscape. You'll notice that I used a few
varieties as well. The difference in texture and shades of green makes for a more dynamic design.
Furthermore, there were plenty of wet areas where I could directly add moss without fabric.
Needless to say, I took full advantage of those. However, even at this point,
the water dribble at the bottom still wasn't what I wanted. Adding this small rock was a great
way to build upon the scape and soften the drip. I just had to stabilize it from underneath with
epoxy. I continued to build out the scape further to portray the appearance of a mountain range
instead of a column. As I'm sure you'd guess, I secured them with foam, which I had to trim later.
In my opinion, the addition of these stones bolstered the appearance and took it to the
next level. They're missing moss though. That's nothing a little fabric won't solve. Moss's
ability to add so much life to hardscape is something I never get tired of. It's just
incredible to see. And although it looks awesome already, it's the details that always take it to
the next level. I had to vacuum out water to remove debris before I could get started.
I wrapped the pump in an old sponge filter to protect the intake as well.
This gravel doesn't match the dragon stone at all, but I had to include it to build depth.
I didn't have much sand to work with, which I added above this and in the pulling area atop
the hardscape. I also placed smaller stones throughout the sand in the foreground to
accentuate everything else. After moving and filling it back up, I got the pump running.
I felt that more foliage in the water feature would help, but I kept it simple with Anubias
nonna petite. It's important to note that I'm only planting the roots. The rhizomes have to
remain above the substrate or the plants won't last. Above the water and various mossy pockets,
I nested Ficus pumila quercifolia. Finally, I added a small bunch of Selaginella unsanata
as a feature plant. Taking a step back from it all, I'm really pleased with how it came together.
It's always a toss up with how much detail to add, but this is a perfect example of less is more.
There were many elements I intended to add, like driftwood or jungle vines, but as I worked
through this, simplicity made more sense. This best showcased the features I wanted to be the
focus of this, like the hardscape design, moss, and the overall cohesiveness of the piece.
Furthermore, I didn't want water ripping through how it was initially. I don't know about you,
but I think little drips within the grotto area and the constant cascade moving along the surface
of the rocks is stimulating to watch. I knew I wanted the first video of 2024 to be a build,
but it was great to get back in the studio. Now that I think about it, this was actually
the first one I've done since completing the nature design studio. Moss has been a huge part
of the channel since the beginning, so it seems like a fitting way to do that and bring in the
new year.
