**** Cutting Instructions **** Outside fabric: (If creating your own unique outside fabric, final measurement should be about 14.5” x 26.5”)
Top fabric: --Top Fabric: Cut two 3.5” x 14.5” --Patchwork section: 1 Moda Mini-Charm pack OR 42 - 2.5” x 2.5” squares
Bottom fabric: --Cut one 9” x 14.5”
Lining Fabric: --Cut two 13.5” x 14.5”. (If you’re using fat quarters like I am cut two pieces of 10.5” x 14.5” and two pieces of 3.5” x 14.5”. Sew the 3.5" and 10.5" pieces together like shown in video.)
Straps: Cut two 4” x 22” strips
Pocket: Cut one 7” x 11.5” piece
Batting: (For a bag that holds its shape better you can use fusible fleece or Fusible Foam stabilizer. ) --Outside piece: 30” x 16” --Pocket piece: 5-1/4” x 6 3/4” --Strap pieces: Two 1-3/4” x 22” strips
Hi everyone and welcome back to my channel.
I have a really fun sewing slash quilting video for you today.
We are going to make this really cute tote bag.
This is a really simple project.
It's definitely beginner friendly.
You can take the skills that I'm going to teach you in this video and make a bag any
size that you like, just employing the same techniques, but I will include cutting instructions
below for my exact size bag.
This is a pretty good size tote bag.
It's not super large, not too tiny.
I made it specifically to fit my laptop in and I have a Windows Surface Pro, but you
can also put library books in here or craft projects or school books or notebooks or anything
like that.
This finished bag that I'm making is about 12 inches high by about 13.5 inches wide.
I will include all the specific cutting instructions for you below, but like I said, you can really
make it any size that you want.
Let's go ahead and get started making our bag.
Let's talk about what we're going to need for supplies.
I will put the exact cutting instructions for this particular bag in the down bar below
so you'll have all the sizes down there.
Basically, I used five fat quarters and one of these mini charm packs.
You're going to need two pieces for this top section right here.
I used a charm pack for this patched work section.
If you don't have a mini charm or you would like to just dig into your stash and do a
little stash busting, you can use 42 2.5 inch squares.
Again, I'll have all this below, but that was right there.
You're going to need one piece for the bottom portion of your bag and then you're going
to need a piece for your pocket and two pieces for your handles.
The other thing that we're going to need is some lining fabric.
Because I was using fat quarters, I had to piece together mine because my fat quarter
wasn't large enough.
I actually cut this fat quarter in half and then added this chunk.
I'll have the measurements below, but this was 3.5 by 14.5 and this was 10.5 by 14.5.
I made two of those and then I trimmed them to be the correct size below, which is 13.5
by 14.5.
Then, in addition to your lining fabric, you're going to need some batting.
You're going to need a large chunk.
Again, measurements will be below for the actual bag itself.
I decided to line my handles just so that they were a little bit sturdier, a little
bit thicker, and I felt like that would make them a little bit stronger as well.
You can skip this step if you like and then I also put a little bit of batting in my pocket
to make it a little bit thicker as well.
These two are kind of optional.
You can skip those if you don't want to line your handles and your pocket.
I kind of like the way it feels.
It makes the handles a little bit more stronger and same thing with the pocket.
It's got a little bit more grip in it.
My bag is pretty squishy and I'm just using regular cotton quilt batting.
This is stuff that I have left over from my quilt projects, so I really like to use them
for bags.
However, it is pretty floppy.
If you would like to have a bag that holds its shape a little bit more, you could always
use fusible fleece instead of the cotton batting.
You can also use, there's like a bag foam, I can't remember what it's called right now,
I'll try and find it and link it below, but it's a little bit denser of a foam and it
actually will create a bag that can kind of stand up on its own.
Anything you want to use in your bag is totally fine.
I just like to use my leftover quilt, my leftover batting because that way I'm kind of using
up, you know, the little pieces that I cut off after I'm doing quilts and I don't feel
like I'm wasting it and that kind of thing, but you can use whatever you like.
And then for this particular project, I used fabric from the Farmer's Daughter line by
Lella Boutique.
This is a new line depending on when you're watching this video.
If you're watching it right when it uploads, this should be in stores right now, but it's
just a really beautiful line.
I love her fabric and I just pulled five fat quarters out of here for this project, but
with the requirements below, you can certainly, you know, grab from your stash or, you know,
go out and get your own yardage or however you want to do it.
That's just how I did my project.
Alright, so let's get started sewing.
The first thing that we're going to do is create this kind of patchwork section right
here because these two pieces are already cut to size, so we don't really need to worry
about those.
But this one, we need to get placed together.
Aside from fabric goodies, the other thing you'll need is a self-healing mat, a clear
acrylic ruler.
I like these Creative Grid ones and I'll put a link for all of this below.
Some kind of a rotary trimmer and either some pins or some of these Clover Wonder Clips.
They're great.
You don't have to have these, but maybe just something to pin your project together with.
And then I like to use this 505 basting spray.
You don't have to have this either.
You can also pin based your quilting as well, but these are just some additional supplies
you'll need.
Everything is out of the way and I take my mini charm pack and we're going to open her
up.
I think that's always the hardest part for me.
And then I am going to just spread all of these out in a way that's pleasing to the
eye.
You can, of course, do it however you like.
I'll show you what I come up with, but we're going to put three down and seven across.
So I'm going to go ahead and just start laying these out and then I'll catch back up with
you when I am done.
Okay, so here we are and I've got two sections.
I've got this top one and this bottom one and I just kind of spread them out however
I think looks best.
You can spread yours out however you like them.
And now we're going to chain piece these together.
So if you're not familiar with chain piecing, basically it just means that I'm going to
sew quite a few of these together without cutting my thread in between.
So how I do it is I sew down this one first and then I'm actually going to do both of
them together, so hopefully this isn't confusing.
And then I'll sew these and then I'm going to add on this row and I'll just sew all the
way down and continue doing that.
So how I do that is, and that's just because it's faster.
If this gets confusing for you, just do it however it works best for you.
But I'm basically going to take this row and flip it on top of this row like so and I just
line up these little points on there and just make sure that you've got right sides together
as usual and we're going to sew a quarter of an inch all over this bag unless I otherwise
specify it.
So I'm going to take these over to my machine and I'm just going to sew a quarter of an
inch down those and then I'm going to not break my thread at all in between this process
and then I'm going to do these.
And then I'll show you what that looks like when I come back and we'll add this row.
So I'm going to just carefully stack these in order that I need to sew them and bring
them over to my machine.
Alright, so here's my stack.
I literally just moved it over to my machine without turning them or anything like that
and we are just going to sew using a straight stitch.
I do about two and a half inch stitch length but you can of course do whatever you want
and we're going to sew a quarter of an inch down each side and as you'll see when I'm
done I'm not going to cut my thread at all.
I'm just going to continue sewing.
So let's go ahead and get started and I apologize, I'll try and cut out my machine here because
it can be kind of loud.
So I'm not cutting my thread at all, I'm just going to keep going.
And I'm just kind of relining these up to make sure that they're nice and square.
Okay so those were my first three for the top one and then now I'm going to do my first
three for my bottom one.
I'm actually not going to cut this thread, I'm just going to leave these guys all chain
pieced together.
I'm going to keep them in the same order and bring them back over to my cutting mat.
Okay so we're back over at our cutting mat and this is the row that I've sewed together.
They're still attached, I have not cut the strings or anything and I also haven't ironed
at this stage.
Now if I was doing this at home without trying to film a video, I wouldn't even bring this
over here.
I would just pull it back up to the beginning and then just add these all along.
But I wanted to kind of show you the concept.
So here's the row we just stitched and now we're just going to do the same thing.
We're going to take row three and we're just going to lay them across.
And really what I do is I just pick them up in order and bring the new pile over to my
machine and then as I get to each one I can just put it back on.
You can also take a picture of this with your camera in case you're worried you're going
to get out of order.
But we're going to take this bundle back over there and then just continue sewing on the
third strip and then we're going to do the same thing for the rest of the four.
Okay, so here is my finished chain piece project and as you can see it's all still attached
to one another.
So what I'm going to do is I'm going to leave the two sections together but I am going to
cut apart just the middle row here so that I now have my front of my bag and my back
of my bag.
And then all I'm going to do is take these over to the sewing machine and I flip them
over this way and then because I want my seams to nest I'm going to just iron them going
opposite directions.
So for example for this top row I'm going to iron all of my seams going this way and
then for the middle row they'll all go this way and then for the bottom row they'll all
go this way.
And that way when you go to sew these three rows together your seams will nest really
well and I'll show you what that looks like and everything will have great corner points
and all that.
So I'm going to do that really quickly but do not cut these rows apart.
These little chain piece stitches will help you keep all of your little pieces in order
so that you don't accidentally move anything around.
Alright, so I have pressed both of my sections and as you can see these seams are going this
way, these ones are going this way and these ones are going this way and that's going to
make our corners really nice and crisp.
So what we're going to do is we're going to take this, one of the panels, doesn't matter
which one, and we're going to flip it right side over and then I'm just going to take
one of the sections and flip it on top of the other section and then as you'll notice
now that we did our seams going in opposite directions you'll kind of see that they sort
of snap together right there.
You've got this seam going this way and this seam going this way.
So you've got what's called a nested seam and you can take and stick a pin in there.
If you have a lot of these, sometimes I will do that.
Since this is a bag and they were all pre-cut I'm actually not going to go ahead and pin
but if you're a newer sewer you may want to just go along and put a pin in each one of
these little junctions.
But let's take this over to our sewing machine and we are going to sew a quarter of an inch
all the way down this edge and then when we're done with that we're actually going to do
the same thing with the bottom row.
So let's pretend like we sewed those.
We'll just flip up this bottom row, again nest your seams and sew a quarter of an inch
here.
So let's go over and do that.
Okay, so that's my first one and since I'm at my sewing machine I'm just going to go
ahead and open this up and there we go and then I'm going to fold over the other side
and just do the same thing, just nesting my seams as I go.
And I'm just going to get this first one kind of set and then I'll do the other ones as I go.
There you go.
And so you've got one of your panels and we'll take this over to the ironing board and iron
it but I'm going to sew up the other one really fast.
The piece is done.
We're going to take our two top portions of our bag and we're going to sew them to each
of these.
Now if you have a directional print you'll just want to kind of pay attention to that
here.
I want my writing going right side up and you wanted to kind of pay attention to that
when you were sewing these together as well but as long as you picked up your pieces like
I did then they should have all stayed in the right direction.
So I'm going to go ahead and sew this piece onto this section and I want my writing going
up so that looks fine.
I'm going to flip it together, right sides together and then I'm going to sew a quarter
of an inch across my piece and then I'm going to do the same thing with this one.
And then we'll meet you back here.
One thing I did want to mention really quick is my bag is 14 1⁄2 inches wide which means
that I'm going to need to trim off a little bit of this excess over here.
So I just center my bag piece on here.
When I get that on there then I'll trim it up and then we'll add the bottom.
If you would like you could make your bag, I think this would be 15 inches wide instead.
I just wanted to give myself a little bit of leeway for you know if I have any kind
of crooked edges you know when I was sewing my patchwork together and also that's the
size that measured for my laptop.
But you can make yours however wide you would like.
I'm going to set that seam really quickly and then normally I would press towards the
darker fabric but since there's so many seams on this side it'll lay a little bit
flatter if you press towards the solid piece and not the patchwork piece.
Okay so here's our two pieces and because I have writing on mine, yours may not matter
but I definitely you know made sure that I had my writing going the same direction.
I'm actually going to turn them sideways.
So this is the top on one side and then you're going to flip this second piece over because
that's the top for your other side and then we're going to sew in the bottom portion
of our bag right here.
And so all I'm going to do is line those up so we've got top, patchwork, bottom, patchwork,
top and then I'm just going to flip this over onto this piece and sew a quarter of
an inch down and then once that's done I'll flip this piece over onto the bottom and sew
a quarter of an inch down so that I have one continuous piece.
Now if you want to skip all of this patchworking and whatnot, you could just do one solid piece
that would measure and I'll put the measurements below but it's basically fourteen and a half
by about twenty-seven inches.
So totally up to you.
I think it looks cute to add all these different fabrics.
So I'm going to go ahead and do that.
I'm going to sew here and here and then we'll have the outside of our bag complete.
Okay so the next thing we're going to do is lay out our big piece of batting and or like
I said you could use fusible fleece or whatever and I forgot to mention but I did put it in
the description box.
You're also going to want some spray based fabric adhesive.
I use 505.
You could also pin this.
You don't have to use spray basting if you don't like that.
I do just for ease.
And then we're going to place our finished outside fabric here and I'm just going to
smooth it out.
Make sure that you have some little bit of batting sticking out on all four sides.
I definitely have more than I need here.
About an inch or so on all four sides.
And then I basically, this is how I do my big quilts as well, but I basically spread
it all out, get it smooth and then I roll it up and then I go ahead and just spray a
little bit there and make sure you have your windows opened if you're going to use spray
basting.
But I just spray and smooth.
And this is basically just going to keep it from shifting around on you while we do our
quilting.
Like I said, you can pin this as well.
I like spray basting just because it's kind of easier and then I don't have to deal with
the pins.
And then see I can pull it until I can feel the spray basting on that other side there.
And you just kind of smooth it out.
You'll be able to feel if there's any crinkles.
And you don't need like a ton.
Just enough to hold it in place while you quilt it.
And then I just smooth out any wrinkles at this point.
Alright, now, this part is the fun part and you can do whatever you want here.
You can do free motion quilting, you can do straight line quilting, anything that you
want.
If you are using fusible fleece, you actually don't have to quilt it at all because when
you iron it to the fusible fleece, the, you know, fusing actually sticks to your fabric
so you can kind of skip the quilting part if you aren't comfortable with that.
I do have a video tutorial on how to straight line quilt and how to free motion quilt on
my YouTube channel.
I will link those below if you're interested.
I think because I did a patchwork on here and I've got this gingham, I'm probably going
to go with some straight line quilting.
So I'm probably just going to echo and do lines everywhere that I've got seams.
And just to kind of, it holds it onto your batting and it just gives it a little bit
of a decorative touch.
And then once I get up here, I'll probably do some straight lines on both of these sides.
And then I'm not sure what I'm going to do on this, maybe some diagonals.
We'll see what I feel like when I get over there.
If you would like to, you know, if you don't trust yourself to just kind of follow these
lines and you actually want to draw lines on, you can do that with a water-soluble pin
that you can kind of get a damp cloth and wipe off after you're done.
You could use the friction pins and then iron off your lines.
Just note that if your bag gets cold, the friction pins will reappear on the outside
so you may not want to do that.
So you might have to play around with this a little bit on your machine, but I actually
don't really adjust my tension or anything.
This particular machine does have a little setting up here where I can reduce the pressure
of the top foot and I do lighten that up a little bit just so it's not, you know, moving
it around so much since there's some batting under here.
But for the most part, I just go ahead and go for it.
I think you could probably get away with it on most machines.
So here we go.
And I'm just using my foot right here and running it along this edge.
I'm going to do that all the way down.
Okay.
And then I'm actually not even going to cut my thread.
I'm just going to lift it up.
Sew a little ways till about right there.
Kind of eyeball a lot of stuff, guys, so you can be more precise if you want to be.
And then again I'm going to run one this way.
So I've already done all of my horizontal lines on this side of these strips.
So now I'm going to do these vertical lines.
And what I like to do is start at where this horizontal stitch line started and I'll just
do a little backstitch right here, just like a couple.
And then I'll sew all the way down this seam.
And then I stop right on this next stitch line.
Lift up my needle.
Turn it.
I'll stitch right along that line.
Or as close to it as I can.
Lift it.
Turn it.
And continue on.
And then I'm going to do this little backstitch right there.
And cut it.
That way when you don't have extra lines coming right here, you could totally do that if you wanted.
It doesn't really matter.
That's just kind of how I do it and I thought I would share that little tip.
And then I come over and do the next one.
Okay, I'm all done quilting it and I'm just going to trim off some of these threads.
And then I'm going to take my entire piece and I'm going to size it up following the instructions
that are in the down bar below.
If you made your bag a different size, then you can just kind of clean up the edges.
Alrighty.
First thing I'm going to do is just trim up one of these sides.
And I kind of line up one of the lines of my rulers.
The other one is on the edge of the bag up here.
And just trim that off.
And I'll do the same thing to this side.
And then I'll do the long sides.
Alright, now when I'm doing these longer edges, I'm going to just pick one of the lines on the edge of my ruler here
and line it up on this side.
And then I'll line it up on this side.
And I just try and cut it as straight as possible.
Because my ruler isn't quite long enough.
There we go.
And I just need to do this edge and we're good to go.
Alright, so we've got the outside of our bag all quilted.
Here's the back side. Not very exciting.
But it's nice and quilted. It's all trimmed to size.
And now we're going to work on our lining, our pockets, and our handles.
And if you're curious...
And here's just a close-up of my quilting.
So I just did some lines about a quarter of an inch horizontally.
And then I did them on both sides vertically.
And then this one is probably virtually impossible to see.
You might be able to see it on this side of the quilting.
I just did three straight lines.
So I did one at a quarter of an inch right here.
And then I just kind of eyeballed one in the middle and one right here.
Knowing that there's also going to be a seam at the top.
So you can kind of do whatever you want.
And then on the bottom I actually decided just to leave it because I liked the gingham.
And since it's quilted on the patchwork sections, I think that this will be fine.
You want to read the instructions on your batting to make sure how many inches you're allowed to leave
if you're planning on washing this bag.
Because if you don't quilt it tight enough, the batting can kind of over time bunch up in there.
But this section isn't that long and I think it'll be fine.
So that is my finished quilted piece.
And we are going to set this piece aside and start working on the lining and the handles and the pocket.
Okay, so here is our pocket piece and here is our little pocket piece of batting.
You do not have to put batting in your pocket if you don't want.
You could simply fold your pocket in half, right sides together.
And then sew along these edges leaving a space open.
And then you can flip it inside out and iron it and then close up that when you attach it to the lining.
I like to have my pocket a little bit more, just a little bit thicker.
And so what I'm actually going to do instead of turning my pocket is I am going to iron it where I want my creases.
So I'm going to iron a crease here.
And then I'm also going to iron a quarter of an inch on the edges, on the ends, both ends.
Sorry, you can't see that. Both ends.
And then a quarter of an inch along both sides.
And then I'm going to just place my batting on the inside and sew around it that way.
So let's do the halfway mark first. I guess it doesn't really matter what order you do it in.
So I'm just going to press it in half first.
And I do have text on my pocket so I'm going to make sure that my pocket is, you know, right side up.
And then I'm going to carefully do a quarter of an inch on all four edges.
So there's that one, that one.
And then without burning my finger, I'm going to do one on this edge and one on this edge.
Okay. Alright, so we've got that.
And then now we don't have any raw edges sticking out and I'll show you how we're going to sew that.
Okay, so I've pressed all of my edges.
And then I'm going to take my piece of batting and just kind of open up my edges.
And just kind of tuck my batting in there.
If it's a little bit too wide, you don't want the batting going over where your crease is.
So you can just trim it a little bit to make sure it fits perfectly.
Especially if you've made your pocket a different size.
And then your edges should lay over your batting.
Okay. And then we're just going to take this section and fold it over the top.
And then you might just have to kind of press in those seams just a little bit to make sure they're not sticking out.
And then what I'm going to do is take this over to the sewing machine.
And I'll probably, just because I've got some little seams right there that are kind of wanting to pop out,
I'm going to grab a couple of Wonder Clips and just place them on those edges.
Just so they don't go anywhere while I'm quilting it.
Okay.
Alright, now I am actually not going to sew around the edge just yet.
I'm going to sew along this top edge. This is my folded edge.
So this is going to be my top edge.
And then I'm going to do just a couple of horizontal, sorry the pocket goes like this,
I'm going to do a couple of horizontal stitches across there just to hold that batting in there.
And then when we add the pocket to our lining, then we'll sew around these edges closing them up.
So for now just make sure that they're tucked in and kind of out of your way.
And then let's go over to the sewing machine and just make sure you do like,
I do about an eighth of an inch on this top stitch just to make it look kind of nice and finished.
Because this will be the top of the pocket and you're not going to actually stitch that to the lining.
Alright, so let's run over and do a few.
You could also do some free motion quilting on this or anything you want.
Or you could skip the batting altogether.
Okay, now I've just trimmed off my little extra stitches.
We still have our pocket kind of open down here.
And this open side is going to be the bottom of our pocket.
So we're not kind of catching it when we put things into our pocket.
And the folded side will be the top.
So you're just going to grab your lining and kind of center it horizontally
and a little bit closer towards the top than the bottom
because this will be the bottom of the bag right here.
And so just kind of center your pocket wherever you want it.
Mine is about, let's say, three and a half inches on those sides
and then about two and three quarters inches from the top.
It doesn't have to be perfect. Just wherever you want it.
And then you can pin this on.
Since we're going to be taking this over to the sewing machine
I would probably just stick a couple of pins in here
just to kind of keep it in place and keep it, you know,
from getting crooked or anything like that.
So I'm just going to pop a couple of pins on there.
No big deal.
Alright, and then what we're going to do is we're going to take it over
to the sewing machine and we're going to run a seam
all the way around these three edges.
Of course, leave your top of your pocket open.
And you just want to make sure that as you're running your seam
you're getting these folded seams in as well
so that they don't come open.
And if you run about an eighth of an inch from the edge
on all four sides, you should be good.
So we're going to go ahead and attach our pocket to our lining
and then we'll be right back.
I also will do a few backstitches here
just because that pocket will get tugged on
and so I just want it to be a little bit extra secure right there.
And then I'll get going sewing.
When you get down here to your corner
just make sure that all of your ends are pushed in there.
Leave your needle in the down position.
Lift up your foot and then continue on.
And then I'll do another backstitch here on this edge.
And there we go.
We've got our pocket attached to our lining.
Okay, so we've got our pocket lining with a pocket on it.
Make sure that you have it right side up.
And then this is the bottom.
And then we're going to take our other piece of lining
and match those up and lay them right sides together.
And then what we're going to do is sew.
We're going to leave the top open.
So do not sew across this line.
We're going to sew down this side to about here
and down this side to about here.
Sew along the bottom and both sides of the bags
leaving open a space to turn.
And I leave about, I don't know, what is that?
Like four or so inches at the bottom to turn your bag through.
If you don't do this step
then you're not going to be able to turn your bag right side out
and it'll be a mess.
Alright, and then when you get to this point
you just do a little backstitch.
Just because you're going to be tugging on that section
when you put it through.
Skip over about four or five inches
and a little backstitch and keep going.
Okay, so here is our lining
and we've got a little opening down here at the bottom
to turn our bag.
And then the entire top of the lining
is also open with our pocket.
And we're just going to leave it like this and set it aside.
Okay, so now we're going to work on our straps.
And I'm going to kind of handle the straps
the same way I handled the pocket.
So I'm basically going to take my strap
and press it in half lengthwise.
And then I'm also going to press in
a quarter of an inch along this edge
and a quarter of an inch along this edge.
You don't need to worry about these farther ends
because they're going to be hidden in your seam of your bag
and so we don't need those to look all nice and pretty.
So let's go ahead and do that.
And I'm going to go ahead.
It doesn't really matter what order you press this in.
So I'm just going to go ahead and do this one first.
And if you guys are wondering,
this is a Panasonic cordless.
I think it's like WL600.
And I love it.
It holds its heat really well.
I was worried about a cordless iron,
but I'll put a link for it below.
It's double pointed, which is nice.
And I can just not be restricted by a cord.
Okay.
So there's the quarter of an inch all the way down there.
And then we're going to fold it in half
and just line up those edges and press.
And we're going to do that to both of our straps.
Alright, so here are the straps that are all nice and pressed
and then here are my strips of batting.
And I'm going to do the same thing I did with my pocket.
I'm just going to open up my strap here
and just place my batting kind of down the middle of it.
Flip it over.
And then I'm going to take this whole thing over to my sewing machine
and I'm going to run...
First one I'm going to do is just down this open edge
and I'm going to run about an eighth of an inch away from that edge,
an eighth of an inch away from this edge,
and then probably one right down the middle.
I'm going to do that on both of these straps
just to kind of secure the batting in there.
Like I said, if you don't want to use batting,
you can totally skip this step and just do the stitching for decoration.
You could just do the edges.
Totally up to you on this.
But...
Alright.
So let's take this over and stitch in our batting.
Okay, here are my finished straps
and I'm just going to take some scissors
and just kind of chop off my little pieces of batting
that I have hanging out here.
On both ends.
Okay.
And we are ready to assemble our bag.
Okay, now grab your piece of outer fabric that we have already created
and we're just going to line it up
right sides...
Oops, sorry.
Right sides together
and fold it in half
like so.
And then we're just going to stitch a quarter of an inch down this side
and down this side.
Make sure you leave your top open
and then your bottom should just be a solid piece.
Okay, so here is our piece.
Our outer portion of our bag
and I just sewed down both sides.
The top again is open.
Bottom is solid.
And...
Now we're going to box the bottom of our bag.
So all that means is this little kind of boxy corner right here.
If you want to skip this step, you totally can.
And then your box would just...
Or your bag would just be, you know, flatter.
But I like to add a little boxy bottom to my bags
just to...
I don't know.
Just to give them a little bit more design.
Okay, so how we're going to do that is
I'm going to stick my hand inside the opening
and I've got one of my fingers into this little point right here.
And you just kind of want to fold it in half and make a triangle.
And I actually do that on the other side
at the same time.
So essentially
I've kind of got these seams
down here lined up.
So I know that I've got my
bag folded down the middle.
So I've got a point on this side and a point on this side.
Okay?
So we've got this
like nice little
diamond here.
And then this part is totally up to you
however large you'd like to make your
boxy bottom.
The one on my bag is only an inch and a half in from the bottom.
And so what you want to do is just take your ruler
place it on the point of your triangle here
at an inch and a half.
This is my inch and a half line.
And then I also line up this diagonal against one of these edges.
Doesn't really matter.
And I just draw a line across here.
Like so.
And then I'm going to go ahead and stick a pin in there
just to kind of
hold it in place.
And then I'm going to fold that one out of the way
and I'm going to do the same thing
on this corner.
So I'm at my one and a half inch mark.
I lined up this
diagonal line on my ruler.
And there we go.
I'm going to throw another pin in there
to hold this one.
So this is the lining
or the outer portion of our bag.
Okay and what we're going to do is
we're going to take it over to the sewing machine
and sew along this line
and along this line.
And then we'll chop it off at about a half inch
or a quarter of an inch.
But first before I go and do that
I'm also going to do the same thing to my lining.
So I'm going to set that out of the way.
And here is the lining of our bag
that we created already.
Again, here's the top opening
and then here's the bottom.
Now you just have to be careful
because you do have a hole in here.
But I'm basically going to do the same technique.
I'm going to
stick one of my fingers up in this corner
and flatten it out.
Well, it might be easier with the bag lining
if you do it this way first.
Line up these seams down here.
On the bottom so they're basically straight.
And then poke out this corner
and the one below it.
The lining is just a little bit more fickle
because batting is just a little bit more sturdy.
So just do the best you can.
Just make sure that you're basically
getting it folded in half.
Okay, so there's that point
and here's this point.
And then we're going to do the same thing.
We're going to mark it at one and a half inches.
And you can make yours a little bit boxier
if you want.
Do two inches or whatever.
I find that one and a half to two inches
is a good boxy bottom.
This one isn't very large
but it's perfect for what I need it in my bag for.
Okay, so we're going to mark that one.
Open it up.
Just make sure this guy is straight.
It's a little crooked.
There we go.
And do the same thing.
Okay, and then we're going to take all four of these corners
over to the sewing machine.
Sew along the lines and cut them off.
And then we'll assemble our bag.
Alright, so the good news about marking them like this
is I just have to flip this one out of the way.
I do a backstitch at the front and back
and get my pin out of the way there.
Alright, now I'm going to fold that piece out of the way
and do this one.
Okay, so there is the outside of our bag
and now we're going to do the same thing to the lining.
Okay, fold that one out of the way and do this one.
And you've done all four corners in record time.
Okay, so here we are.
And before you do this, you could turn this inside out
and just make sure you kind of like that
because once you cut it, you can't really change it.
But if you wanted it to be less or more,
you could kind of adjust it.
You know, just rip that out and redo it.
But I like this, so I'm just going to go ahead and cut it
about, I don't know, a quarter of an inch or so from the edge.
And I'm going to do that for the lining as well.
And it doesn't have to be perfect because this is going to be hidden.
Okay, now we only have one more step to do
before we assemble our bag.
So we're going to take our outer bag
and flip it right side out.
And we are leaving the lining portion inside out.
And you can just poke out those corners we just did.
I just used my finger, but if you need to use like the
end of a pencil or something, you could do that.
Okay, so here is that.
And now we want to add our straps.
Alright, and so if you would like,
you can kind of press this.
Totally up to you if you're, you know,
you've got a thicker seam in here and it's not laying nicely.
You can kind of press those edges.
I'm going to just leave mine.
But we're going to attach our handles now.
And so what you're going to do is grab one of your straps
and just place it on here.
Just make sure that you don't, you know, twist it.
You don't want to see any weird twisting right here.
Make sure that it's straight, like so.
And then we're just going to clip it on.
And you can measure, I'm going to do mine
about two inches from the edge here.
Just because I like the way that that looks.
And I'm just using my mat here.
I'm not getting super specific.
Okay, so attach that one, make sure there's no twist.
Flip it over.
And then we're going to do the same thing with the other handle.
Again, I'm just looking at my mat.
You could also line it up with the other strap.
And I'm just using some Clover Wonder Clips.
You could use pins or whatever you have on hand.
Okay.
Alright, so those are in there.
Make sure your straps aren't twisted at all.
They should kind of be able to lay flat like that.
And then we're going to take this whole section
and we're going to place it inside of our lining.
So the lining is inside out.
We're going to open it up.
And take our bag.
And I kind of like to fold it in half like this.
Sort of stick it in there.
And then you can kind of unfold it.
But whatever works for you.
Get it all the way in there.
Once you have the inside of your bag in there,
make sure that you've got right sides touching.
This is your lining.
This is your outer portion of your bag.
And I always start at these seamed edges over here.
And I just kind of line up those seams.
And then I'll stick some Wonder Clips here.
So I'm going to start on that seam.
And I'm also going to do one over on this seam.
Like so.
Okay.
And then I just kind of straighten it out in there.
And then just attach it kind of around.
And I'm just going to use the same clip that's holding on my handle right there.
Here's another one.
Just kind of straighten it out. My handle got crooked.
And then I'm going to flip it over.
And do the same thing on this side.
Just make sure I have all those.
If you'd like, you can kind of put one in the middle here.
You just want to make sure that all of your edges are lined up nicely.
And you've got your straps in there as well.
So however many pins or clips you want to put in is totally up to you.
Okay.
Alright, so now I'm going to take this over to my sewing machine.
And I'm going to sew all the way around the edge.
And I do not exactly a half an inch, but like a generous quarter of an inch.
Somewhere in between there.
Just to make sure that I'm catching my straps.
And then when I get to my straps, I usually go back and forth over them a couple of times.
Just to secure them in there a little bit better.
But we're basically going to sew all the way around the entire hoop right here.
Okay, so I'm coming up to my first handle right here.
And I'm just going to go back and forth over it a few times.
Just to give it a little bit of extra strength.
And then keep going.
And then when I get all the way around to the end, I'm just going to run a little backstitch right here.
Just to kind of secure it.
Okay, time for the magic.
So you're going to just carefully, through the opening that you had in your lining, pull your bag out.
And if you tear it just a little bit, it's okay.
Just try and be gentle.
Alright, so.
Here we've got our bag.
We've got our handles.
Should be looking something like this.
And then the lining coming up from the top.
So we've only got two more steps and then we're done.
The first step that we're going to do is close up our lining.
And you can press this or you can just kind of finger press it.
But you've got this opening right here.
And it should already kind of naturally want to go in about a quarter of an inch or so.
So you can kind of just grab that.
Finger press it.
And then you can either hand stitch this closed.
Or, usually at this point in the process, I'm like ready to be done.
And I will just machine stitch it just really close to the edge.
Just making sure that you get, you know, the entire hole so you don't have any holes open.
So I'm just going to run a straight stitch right along to close up that opening.
About an eighth of an inch or so away from the edge.
And I'm just being really careful to get both those pieces.
But sew as close to the edge as I can.
Alright, so we've closed up our bag.
And I usually just check it because I have sewn across there before and just left a little hole.
So you can just fix that now.
And just trim off your extra threads.
And then now we're going to go ahead and push our lining into our bag.
And I just kind of pop out these corners.
And then you might just need to roll this edge a little bit.
And you can hit this with an iron if you like.
Totally up to you.
I'll probably hit it with an iron really quickly.
And then our last step is to just run a quarter of an inch or more, quarter of an inch to an eighth of an inch seam
all the way around this edge just to finish it off.
It gives you a little bit more hold for your handle.
And then it also keeps this lining from, you know, coming out as you're using your bag and what not.
Alright everyone, so that is the tutorial for how to make this fun bag.
It's a little patchwork bag.
Super fun and super easy.
You can really kind of whip one of these out in about an hour to an hour and a half depending.
Honestly, I think the hardest part was picking the fabric for the project.
So that always takes me the longest, but that's just me.
Anyways, I hope you enjoyed this video tutorial.
If you have any other tutorials that you would like to see, please make sure to leave a comment below.
Or if you have any questions, I will put all of my contact information and all of that below.
As well as a link to my blog post which will have even more information on this specific bag.
So I hope you enjoyed this video.
Thank you so much for watching and I will see you next time.