2-Tier Flower Arrangement

Beautiful flowers
9 followers
Hello everyone, welcome to my channel
In front of me is a 2-floor flower with a beautiful leaf pattern
Now I will show you how to make a flower vase
For this 2-floor flower, I use this white fabric
I will put the fabric in here
I will put the fabric in the front part
I will put a thread in here
I will put the thread in the back part
I will put the thread in this horizontal line
For this 2-floor flower, I will use this woolen thread
I will cut off the green thread
I will use a needle to fix the thread
I will roll a circle on the top
It will be very big
The highest angle of the leaf is 25cm
I will use 3 leaves
I will fold my hands
The distance between the leaves must be the same
I will fold my hands
At the left hand I will use woolen thread
I will use woolen thread
from the bottom to the top
and I hold it close to the knot on this side
and when I hold it, I have to hold it so that I can turn this leaf over to the front
I will hold the tip of my foot in this corner
I hold the tip of my foot so that I can pull it out
just enough for the first leaf and the second leaf to stick together so that I can shoot the arrow
I will put some leaves on
At the top, I also hold the tip of my foot and walk up to the top
I will hold it straight up here and the leaf face up
and now I will swing this bow
This is the fan, I will swing the bow here
and at the bottom, I will shake my hand a little
I will stand on this side to make it easier to swing the bow
I swing the bow like this
and when you come down here, remember to shake your hand
I swing it down and then I shake it up
to create a small path, it will fly like this
it will look softer
and after we cut it, we will take this needle and press it
and when we press it, we press it in the same direction
to look at our needle to make it more delicate
I press it close to the top, it is in the same direction, it is close to here
we pay attention to the small details
our work will be more delicate after completion
just like we keep pressing the horizontal, the horizontal and the top, the bottom, it doesn't look even
In this part, I just need to stick it like this
For this right side, I will use the maple leaf
I will draw a triangle, I will draw a line about 0.3 cm
then I draw a line about 2 cm and then I draw a line
I keep repeating like that until the length I want
I will draw near the leaf like this
to get the small part here
to make my leaf lighter and flutter
I got a leaf that looks like this
and I will stick this leaf to the right
because this leaf is already straight, I will stick this leaf to the left
I will stick this leaf to the left and stick it to the back
I will stick a longer one at the bottom
like this and I will put another leaf here
In the front, I will put a few more small leaves
and I will cut the small leaves into the shape of a buffalo leaf
I will press from the bottom to the top
and I will put my fingers in a little bit
then I will pick it up
then I repeat the step just now
I will create 2 circles
I will cut the top part
I will create a round circle
then I will pull up
then I will make a round circle
I will make a curve at the top
I have created the leaves
When we cut the leaves, it is very cute
If we don't have a brush, we can use a pencil
but I'm going to use a brush
to make it more beautiful
I will put my fingers in the third leaf
So I have completed the upper part of the leaf
It's very simple, but the important thing is
our leaf cutting technique
how to make it smooth and sharp
like the rose leaves and the leaves
In general, these are the skills that we have practiced many times
to make our leaves smooth
Now I will go to the bottom part of the leaf
At the bottom, I will create 2 fans
1 fan will go straight from here
and 1 fan will go to the right
to face the left
I will also use the rose leaves that I have cut
the green part like this
I will put it in here
and the curve of this leaf
it will be layered in this part
I will cut it like this
to make it easier to see
I will hold the tip of the fan
and hold the tip of the fan in front
hold the tip of the fan
I will hold the tip of the fan
I will stand here to cut
I will draw a line
I will use the pin to press it
I will hold the tip of the fan from the bottom
I will hold the corner of the leaf
First, at the bottom, I cut it out, cut it straight, cut it out.
Now I'm going to stand over here to cut.
I'm going to make a line from the bottom up.
I'm going to go in here, and I'm going to start going up.
I'm going to add another line down here.
Then the curve will be straight.
I'm going to use a needle to press it down.
I'm going to cut this corner.
I'm going to take this corner, and I'm going to put it in the leaf.
I'm going to put a leaf in my left hand.
I'm going to put it in the curve.
And I'm going to put a smaller leaf in here.
After I put these three leaves in, I'm going to put the previous leaf in and finish the leaf curve.
I'm going to measure the center point first.
I'm going to put it from the bottom up.
I'm going to measure the center point.
And the rest of the leaves, I'm going to put them in the back.
I'm going to put it in the back.
I'm going to put it in the back of the leaf.
I just measured it.
In this part of the leaf, you just have to make it look like this.
It will look very beautiful and delicate.
And the distance between these leaves must be equal.
I'm going to put it in the back of the leaf.
So I've finished this two-layer leaf curve.
This is a very beautiful leaf curve.
Now I'm going to put the flowers in.
I'm going to use rose petals here.
I'm going to put the rose petals on this side to match the bottom.
Actually, these are the rose petals I bought yesterday.
But due to the weather, it's a little wet.
So the flowers bloom very quickly.
But I bought it, so I can still do it.
Actually, when I put it in this gel, the flowers will bloom more beautifully.
But if we let it bloom,
we should choose the flowers that bloom a little bit.
It will take a long time to bloom.
This one is only beautiful in the picture.
We will put two petals on this side.
Let's just put it down.
And here I'm going to put a rose petal.
It's a little bit up.
I'm going to put a rose petal on top of this.
And I'm going to put this petal here.
Here I will use a glass bead.
I will put it in the middle.
And I will put it a little bit at the end of the head.
At the end of the head, when I look at it,
I will see the rose petals in the middle.
And here I will also use this rose petal.
There is a place called the egg holder.
Here I will put this rose petal on top.
And I will put it in the lower part of my petal.
From the second flower, I will put a rose petal.
I will go a circular path to here.
And we have a point to note,
the flowers above will hold the rose petals,
and the flowers below will hold the rose petals.
Here I will put a flower on the bottom.
It will be a circular path that embraces the glass bead.
After putting the flower,
there will be a lot of empty spaces at the top.
And I will use the rose petal,
I will put the yellow part first.
I will fold it like this,
so that I can point to these upper parts,
so that it will not overflow.
I will put it in.
I will put it in the lower part.
I will put a rose petal in here.
I will put it in the middle part like this.
For this flower,
I will go in the opposite direction.
And I will choose the most beautiful flower to put on top.
Here is the second flower,
I will hold it with my hands,
and hold it lower than the first flower.
I will hold it gradually,
so that it embraces the circle around here.
We keep in mind that
when it comes to the middle flower,
we choose the bigger flowers.
And the distance between the flowers
when we hold it, it must be even.
In flower arrangement,
the distance is very important.
If we want it to be bigger,
we just tear it a little bit
and hold it with our hands like this.
It will be bigger.
This flower is big, right?
The flowers below are big.
Gradually, I will choose the flowers
that are smaller and smaller.
It is getting smaller and smaller.
Our vase will look very eye-catching
and it will be more beautiful.
And I will put a small flower here.
I will choose the bouquet like this.
We can roll down the bottom part.
It is not necessary to hold it up
so that it is difficult to hold.
We just roll it down.
There are still a lot of empty spaces below.
We will hold a circle like this.
Here I have some buds.
I will put these buds
on the back.
It will be more beautiful.
So I have just shared with you
how to hold a 2-layer bouquet like this.
In order to make a 2-layer bouquet,
we have to be good at single-layer bouquets
before making a bouquet.
Because of these leaf-making techniques,
I have to make a bouquet first
before I can hold it.
Because when holding a 2-layer bouquet,
there must be a close relationship
connecting from one layer to the other
so that it does not fall apart.
I wish you success
in making this beautiful bouquet.
Goodbye and see you again.
