Cheap Smart Home Devices that are WORTH IT

Smart Home Devices
120 followers
These are the best inexpensive smart home devices
you can buy right now.
And they're not just the cheapest devices out there
because sometimes the cheapest is just complete garbage.
So these devices are cheap in price
while still being really good.
There are about 20 different kinds of smart home devices,
so let's get into it.
All right, let's start off
with the classic smart home bread and butter,
smart light bulbs.
And these bulbs are so cheap
that even George Costanza would be impressed.
I'm cheap?
You think I'm cheap?
How could you say that to me?
I can't believe it.
These smart bulbs are only about 12 or 13 bucks
at the time of making this video.
So these are perfect
if you're just starting to build out your smart home
or if you have a lamp off in the corner
that you don't want to splurge on.
The first bulb is from Kasa.
It's a thousand lumens, so pretty bright,
and the colors are fairly bright as well.
The CRI is only 88, so it's not the best,
but it's only 13 bucks
and it will work with most smart home systems.
It's not MATTER certified,
so if you want something
that will be the most smart home compatible
and work long into the future,
all of these next ones will work with MATTER.
This is an 1100 lumen bulb from Toppo that uses MATTER,
and I thought this would be a slam dunk
for the price and brightness, but I was wrong.
It has horrible connectivity, like absolutely terrible.
I would not recommend this at all.
So this next is this bulb from Lincoln,
and I bought devices from this company years ago,
so they've been around for a bit,
but these MATTER bulbs connected a million times better.
The colors were not as bright and vibrant as the Kasa bulb,
but the white colors look decent.
The CRI is over 90, so better than the Kasa,
and the bulbs come in two sizes,
a smaller 800 lumens and a larger A19 size
that's 1600 lumens, which is extremely bright.
So if it were me,
I would go with the MATTER bulb from Lincoln.
Not something I thought I would say
before testing these bulbs,
but for the price, MATTER compatibility,
and how well it works, it's difficult to beat.
Before I move on to the next category,
I just want to point out that I bought
most of these devices with my own money.
There are a few that companies sent a while back
for a review, but none of the companies
know I'm making this video,
so you don't need to worry about any of that.
Okay, next up is light strips,
and no, they don't have to be tacky.
There are some really cheap options out there
that don't look great,
and that's because they don't have
dedicated warm and cool white LEDs.
But this was a must-have for me,
so I have two really great budget options
with good warm and cool whites.
The first is from Wiz, and I use these in my family room,
and they match really well with the Philips Hue lights,
and it makes sense since Signify
is the parent company of both.
These are $33, and the warm and cool whites
look great and are very bright.
The RGB colors are not so bright and vibrant, though.
They use Wi-Fi and integrate into most smart home systems.
But if you wanna use light strips that use Zigbee
and are a little bit more fun, check out the Aqara T1.
These cost more at $45, but the colors are brighter
and can connect directly to Home Assistant
using a Zigbee dongle.
Unfortunately, you can't do multiple colors at once
if you connect straight to Home Assistant.
Instead, you need to connect to the Aqara Zigbee hub
for the different lighting effects.
The warm and cool whites were not as bright
as the Wiz light strips,
so if you're gonna be using it in a living room like ours
and mainly using the cool and warm whites,
I would save some money and go with Wiz.
One of the most, if not the most popular smart home device
is the video doorbell,
and there's some good budget options out there,
but one stands out as the best budget option.
That is the Reolink Wi-Fi doorbell.
It's about $110 right now,
and it has three standout features.
The first is no fees.
Some of those cheaper doorbells will have sneaky tactics
to try to get you to pay a monthly fee for certain features.
None of those games here.
The second reason is that it can record 24-7
to an SD card on the doorbell,
or you can connect it to a Reolink NVR inside your house
to record 24-7 footage to that,
which is huge so you don't miss any footage.
It was a little challenging to connect the doorbell
to the NVR because you have to connect a monitor
and keyboard to the NVR and add the doorbell that way,
and so it is a little bit of a pain,
but the doorbell is so inexpensive
that I can't complain too much.
The other standout feature is HDR,
and here's why that matters.
Look at it compared to the Eufy E340.
All the footage in front of my house
is blown out on the Eufy,
but not on the Reolink doorbell.
The Eufy doorbell is still a good budget option
since it doesn't have any fees,
and it's not too expensive at 150 bucks,
but for much less money and 24-7 recordings,
I would go with the Reolink doorbell.
While we're talking about smart devices
on our front porch,
next let's look at smart door locks,
and to me, smart door locks are all about convenience
and security, of course, a little security,
so I'm really looking at high convenience
at the lowest price.
I've tried out locks that scan my hand,
face, and fingerprint.
The quickest and most reliable
is the fingerprint reader option,
so both of these locks have a fingerprint reader
and are not too expensive.
First up is the Eufy E31.
It's the same as the E30,
but this one has a rechargeable battery,
and it's about 150 bucks,
and it's probably the lightest weight lock
I've ever felt before,
which might not be a good thing.
I didn't do a durability test,
but I don't know if I would have a lot of confidence
if someone was trying to break in the door.
The Eufy E31 uses Matter,
but when I connected it straight to Home Assistant,
there wasn't much it can do.
I could lock it and unlock it,
but I couldn't set any codes
or set up the fingerprint reader.
I had to use the Eufy app,
which I'm sure lots of people complain about this
because there's a little card that says that
right when the box is opened.
Kind of lame.
I feel like you should be able to set up the lock
without using the app,
especially since it uses Matter,
but I don't know.
Am I just overblowing this, or do you agree?
Let me know down in the comments.
The other lock is the Aqara U100,
and this is probably the heaviest lock I've tested,
so it's the complete opposite.
You can pair the lock straight to Apple's HomeKit,
and it works with HomeKey,
so you can just tap your iPhone or watch to unlock it.
You can connect it to an Aqara hub
to make it Matter compatible,
and that's how you'd bring it into Home Assistant.
The fingerprint sensor works great
even if my hands are sweaty,
unlike the Eufy lock that didn't work
if my hands were wet.
Hey, I live in Arizona, so this test is important.
The Aqara U100 is $142,
and I think it's the best value for the price,
but the Eufy E31 is also a good lock
if you want something that's highly compatible
and you don't need an extra hub to work with Matter.
When it comes to smart light switches on a budget,
there is only one that really stands out from the pack.
It's the Kasa dimmer and on-off switch.
They work really well.
They're inexpensive at around $20
and are compatible with all the main systems
since they use Matter.
It connected right away to Home Assistant using Matter,
and there's really not much else to say about these.
It's pretty much the definition of cheap and good.
Now for an indoor camera.
Keep an eye on things in the garage or monitor a baby.
There are some decent, inexpensive options,
Wyze, Topo, Eufy, and I've used them all,
but my go-to is Topo.
That's because of the price, no fees,
detection types, and smart home integration.
I've been using the C120 in my garage for a while,
and it's great.
It costs around 25 bucks,
can record 24-7 to an SD card,
and it's really easy to scrub through the footage.
And there's a lot of alert types,
such as baby crying if you wanna use it to monitor a baby.
But the thing that pushes it over the edge
is that it integrates with Home Assistant.
So I can view the live stream
on my Home Assistant dashboard.
And I know there are definitely better cameras
that are more expensive, but for the price,
I wouldn't be surprised if a few
were already added to your cart.
As for outdoor cameras,
there is one that really stands out
as the go-to budget option, and that's Reolink.
There are no fees,
they work extremely well with Home Assistant,
and the cameras are a great bang for your buck.
There are a ton of different options,
and it might seem convenient to go with something
like this solar and battery-powered camera like this.
But be careful,
because it will not integrate into Home Assistant.
So I would go with a hardwired camera
to be more reliable and integrate better
with your smart home.
I've been using this RLC-810A that's around 80 bucks,
and the price isn't too bad since it's a 4K camera,
and it can record 24-7 using a Reolink NVR.
This camera has worked on the side of my house
flawlessly for years.
Of course, you could go with a less expensive camera
that records 24-7 to an SD card,
but I would hesitate to do that for an outdoor camera
because it's less secure and less reliable
because SD cards can fail over time.
But I get it, it's a lot more convenient
to add one of those
if your house isn't pre-wired for ethernet.
So if you're looking for lots of security features,
great smart home integration, and a low cost,
Reolink would be my pick.
All right, let's move on to a home automation essential,
motion sensors.
And some motion sensors cost more
for extra features that you may not even need,
like the ones from Philips Hue
can detect light and temperature.
But maybe you just want to detect motion for half the price.
Well, that's what these motion sensors are.
My two favorite budget options
are one from Aqara and Third Reality.
Both of them use Zigbee and around 20 bucks.
Deciding between the two
will really come down to two factors, size and battery.
The Aqara motion sensor is smaller,
comes with a stand for easier positioning,
but takes coin cell batteries.
Third Reality is slightly larger
and takes two AAA batteries.
I've been using rechargeable AAA batteries
and it's a million times better.
They're so cheap on Amazon
and I never have to worry about running out.
I always have batteries recharged and ready to go.
I currently use both motion sensors in my house
and if I was gonna buy another one between these two,
I would choose Third Reality.
That's because of the AAA batteries,
the sensor works great with Home Assistant,
and if you have an Echo with a Zigbee hub inside,
the Third Reality motion sensor will work with it.
Moving on to millimeter wave,
and if you don't know what that is, that's okay.
Think of it as presence detection.
So the motion sensors we just talked about
will say there's no motion if you're sitting still at a desk,
but the millimeter wave sensor
will know you're still there
because it can detect small movements like breathing.
Pretty sweet.
There are three budget options ranging from $30 to $40
and they're all good,
but it will depend on your smart home setup.
If you only use Amazon or Google,
then the TreatLife millimeter wave sensor
is a good cheap option.
It's $30 and there are no bells or whistles.
You can run routines based on
if someone is in the room or not.
There are two slightly better options
that cost a little bit more at $40.
The Ikara FP-1E, which uses Zigbee,
and I connected it straight to Home Assistant
using a Zigbee dongle with no issues.
You can see how far away motion is
and it was really easy to set up.
Comes with a little stand
so you can put it on any countertop.
Super easy.
The other option is the Apollo MSR-2.
It's a little bit smaller
and can mount straight to a wall outlet
so you don't have to deal with wires.
I like that.
It's around the same price
and it can detect how far away someone is,
but it uses ESPHome to connect to your smart home.
So if you don't use a system like Home Assistant,
well, it might not be a good option.
If you force me to choose between the two,
I would probably lean towards the Ikara one
just because it uses Zigbee,
but it's pretty much a tie with all things considered.
Okay, let's look at contact sensors.
Similar to motion sensors,
I think the best budget options
come down to Third Reality and Ikara.
Those guys know their sensors.
Third Reality uses AAA batteries
and is much larger than Ikara,
which uses coin cell batteries.
Yes, I know this might be deja vu,
but you need to know this before buying.
Besides the convenience of rechargeable AAA batteries,
sensors with a bigger battery can have a stronger signal.
I might not have given this too much thought before,
but I recently talked about how the Ikara contact sensor
has gone offline for me more than I would like.
It's been happening about twice a year,
which I know isn't the end of the world,
but it's been happening often enough
that I probably would consider the larger sensor.
The magnet is also very strong
on the Third Reality contact sensor,
so if there was a large gap on the installation,
it wouldn't be a problem.
Again, both of these are great options,
but I would probably go with Third Reality
just because of the batteries.
Up until now, many of the budget sensors
have been between Ikara and Third Reality,
and I haven't included Ikea because I tried their sensors
and they didn't work with Home Assistant
using Zigbee Home Automation.
But for water leak sensors, that's not the case.
And they're really inexpensive
for a smart water leak detector,
which you know how much those normally cost, right?
I mean, it's one banana, Michael.
What could it cost, $10?
Yes, the Ikea water leak sensor is 10 bucks
and it's around half the price of Ikara and Third Reality.
Plus it uses Zigbee and works great with Home Assistant.
Nice.
It uses one AAA battery, which can be rechargeable,
and has a little siren on board the sensor
to let you know it's detecting water.
It also looks a little more sleek than the Third Reality one
but the Third Reality sensor has a louder siren
and more water contact options.
Is that worth twice the price though?
I don't know.
If I were buying a lot of water leak sensors
from around my house, I would go with Ikea to save money.
For smart buttons, Ikea's new Zigbee buttons
don't work well with Home Assistant,
which is a bummer because they are very inexpensive.
But there are two buttons I would consider
that are still reasonably priced.
Third Reality has one that uses Zigbee, AAA batteries,
and comes in different colors.
And it's great to see smart home devices
that are not just white or black.
Home Assistant can detect a single press,
double press, or a long press.
And if you're looking for a button
to start up an automation, it's a good option.
Now, if you want a smart button to mainly change lights,
then I would get the Philips Hue Switch.
It's a bit more money at $22, but much better for lights.
It can be paired directly with Home Assistant
and each button can detect a single, double, or long press.
So lots of different lighting scenes for just one device
and very intuitive.
It also comes with a magnetic mount
that can attach to your wall, which is useful.
When it comes to vibration sensors,
there's not a ton of options.
It might seem like a good idea to save a few bucks
to go with the Aqara vibration sensor.
It's around $17 right now.
I use it in a few places around my house and it can be fine,
but I personally think it's worth spending
three extra dollars on a third reality vibration sensor.
You can adjust the sensitivity and it's super responsive.
Also, no coin cell batteries.
Yeah, can you tell I hate those?
It is a bigger sensor,
but I'm usually hiding the vibration sensor anyways,
so the size wouldn't make a difference either way.
With all that said, the vibration sensors
that I'll keep buying are third reality,
even though they cost a little bit more than the Aqara ones.
Having a smart outlet that can measure power usage
is so helpful to automate devices around the house,
like my washing machine or dishwasher,
and Kasa makes an inexpensive Wi-Fi version
that uses Matter.
The only problem is if you connect it to a system
like Home Assistant using just Matter,
you don't have access to energy or power monitoring.
You can only turn the outlet on or off.
If you don't use Matter and instead connect it
to Home Assistant using the Kasa integration,
then you do get access to it, so keep that in mind.
For about the same price,
Ikea and Third Reality make a Zigbee smart outlet
that measure both energy and power usage.
Plus, if you already use Zigbee,
these are a better option since they'll be repeaters
to extend your Zigbee range for all your sensors.
The Ikea and Third Reality outlets are around 12 or 13 bucks,
so that's what I would go with.
Years ago, if you would've asked me
what my favorite budget smart home garage controller is,
I would've said EvilCorp, but no way would I say that now.
Instead, hands down, I would choose Maros.
They have a $30 version that works
with Amazon, Google, and SmartThings.
There's also a $50 version that works with HomeKit.
I use the HomeKit version
because it connects locally to Home Assistant
and it's been working flawlessly for over a year.
There's a sensor that attaches to the garage door
with a long cable, so it doesn't use batteries.
I love this because it makes it way more reliable.
There is a little attachment that you might need
if you have a new garage door opener,
and Maros will send you the piece for free if you need it.
I have tons of automations that use the garage door
and I never accidentally leave it open.
For how reliable it works and how inexpensive the price is,
it's definitely worth it.
Lately, we have seen more budget smart thermostats,
like Honeywell just released the X2S
that is Matter certified and is only 100 bucks,
but I think it's probably worth paying an extra $30
for the Ecobee Essential,
which is basically an Ecobee 3 Lite.
I have a couple of them in my house and they work amazing.
The reason it's cheaper
than the more expensive Ecobee thermostats
is that it's missing one main feature.
There's no motion sensor on the thermostat.
It's not a huge deal because you can still use
the Ecobee sensors to detect presence,
which are compatible with the Essential version.
I personally think Ecobee thermostats are the best
because I can dial in the settings exactly how I like them,
and now the controls are pretty easy to use too.
The only issue with Ecobee is that you need to use
the HomeKit integration to get it
to work with Home Assistant.
That integration is all local, so it's extremely reliable,
but it is missing a few of the Ecobee features.
So even though Ecobee isn't the most inexpensive option,
I think it's worth the extra money for all the benefits.
The last category is something I've only added
to my smart home in the past year or so,
and I'm really liking it.
They're air quality monitors.
There's some pretty expensive sensors out there
that have tons of bells and whistles,
but there are two that are around 50 bucks
and it might be the only thing that you need.
The first one is from Apollo.
I showed the MSR2 millimeter wave sensor earlier.
Well, for another 20 bucks, you can add a CO2 sensor on it.
This is great for rooms that can get stuffy
and you can set up automations to help you air it out.
I've been doing this in my studio
and it's made a massive difference.
The other sensor is from Ikea that uses Zigbee.
It measures 2.5 particulate matter and VOC.
This can be helpful near a 3D printer or in a kitchen
to help monitor if too many unhealthy particles
are in the air.
So depending on where you need an air quality sensor,
either one of these will do a great job
and they're not too expensive.
I know this video's long and if you're still watching,
thank you so much.
I hope you're able to save some money
while building out your smart home
and if you haven't subscribed yet, make sure you do.
Thanks for watching.
Hey, so I'm gonna get a few smart home devices.
Hope that's okay.
Don't worry, they're really cheap.
I don't know.
We could go out and feed our whole family for that.
Okay, I'll take care of it.
All right, dinner time.
Why are we eating cereal for dinner, Dad?
Don't worry about it.
