#rvlifestyle#airstreaming#rvtravel#airstreamtrailer In this video we share with you our tips on how to get the most out of your RV black and gray tanks. You will learn how you can extend the number of day you can boondock on your tanks, How to clean your tanks when dumping them, and how to best manage your tanks when using full hook-ups.
RV: 2017 Airstream 28 Flying Cloud Truck: 2021 Ford F150 XLT 3.5 Ecoboost Bikes: Rad Power Bikes Rad Mini Kayaks: Hobie Oasis 14'
*********** CAMERA GEAR *********************
Our Complete Camera Setup: Go to Camera - DJI Osmo Pocket 3 Dash Camera - BlackVue DR770 Still & Video Camera - Sony A7C Sound - DJI Mic 2 Flying Camera - Mavic Mini 4 Pro
ZEPHYR TRAVELS All Rights Reserved *This channel for entertainment purposes only. We are not RV or travel experts. We share our opinions and what works for us, but you should do your own research.
So, in today's video, we are going to be
working at the business end of our
Airstream, and we're going to talk about
managing your gray and black
[Music]
tank. Hey everybody, welcome to Zephr
Travels. My name is Randy and today we
are sharing tips and tricks on how to
manage your black and gray tank
especially when you are stationary in a
park with full hookups for weeks at a
time in which case we are here. We've
been in this park for almost 4 months
and during that time we've had full
hookups and we've been managing that our
tanks and I want to share with you how
we do that. So let's get started. Now,
we've been parked here for a few months,
and during that time, we've had full
hookups. And you would think that just
having full hookups would be very easy
to manage your tanks. All you have to do
is just open up the valves, let
everything flow. Well, that's really not
the way you do that. And what I want to
do in this video is give you some tips
on how to manage those tanks while you
have full hookups. But these tips can
also be applied to when you have partial
hookups and you don't have a sewer
hookup available.
So, first thing, when should you empty
your tanks? I already said you don't
leave your valves open. You want your
tanks to fill up with with liquid so
that there's something to push the solid
materials out. And that goes both for
the black tank and the gray tank. So,
when should you dump your tanks? My
philosophy is you want to dump the tanks
when you're at at least 80% or more. Um,
we've we've developed a routine of how
we
manage using our waste waters in the
trailer that can leave us to getting
both of the tanks to the same full point
pretty close to the same day. And it
depends on how conservative we're being.
We can either go here at this park with
full hookups, we can go 6 days between
needing to dump tanks. Or if we're at a
regular campground where we need to be a
little bit more conservative because we
don't have full hookups, we can go 7
days. I actually think we've gone close
to 8 days at the max. But that's really
being very, very conservative how much
water we use in showers and everything.
And we're going to share some of those
tips with you on how to reduce the
amount of water that you go goes into
your tanks when you take a shower or
other things while you're living in your
trailer. So, let's talk about draining
the tanks. And for like I said, we want
to make sure that they're at least 80%.
So, let's head inside and see what the
tanks are at. So, I'm now inside the
Airstream and I'm going to check my tank
level. And we have
a sea level um gauge system on here that
gives us a percentage of what our tanks
are at, which is probably to me the best
way to look at it. Now, some of the
older RVs just use a series of lights
and you they go by quarters, quarter
tank, half tank, 3/4 tank, full tank,
and that's not as accurate, but at least
tells you something. So, if I go over
here and I press press the button on the
black tank, it's coming back up at 100%.
Now, if I switch to gray, gray is
currently at
88%. So, this is a good point to drain
the tanks. I've got over 80% of the uh
tank volume is full, which means it
should give me a good flow of liquid
coming out. I want to make sure that
when I'm done emptying the blank tank, I
have a significant amount of gray water
to push out and clean the hose and
everything. And your gray water is your
soapy water from your showers and
washing dishes and stuff. So, that's a
good way to just clean out and disinfect
that hose for you without having to
especially when you're hooked up to full
hookups and you don't want to have to
pull things apart and flush it with
water. So, now we're going to go back
out and we're going to drain the tanks.
But first, I promised you some tips on
how to conserve. So, I want to share a
couple of those with you right off the
bat. First one is going to be doing
dishes because doing dishes is a
great consumption of water. So my first
tip is when you're doing the dishes, get
some of this Dawn Power Wash. This stuff
works great. You can spray down your
dishes before you put them in water. You
actually can spray them down, clean
them, and then just use a little bit of
water to rinse them. So, you can
actually save a fair amount of water by
using this as opposed to filling your
sink up with soapy water. We've used
this a lot, especially when we're
boondocking or don't have access to full
hookups. We spray our dishes down and
then just give them a quick rinse and we
use a fraction amount of water that we
normally would use if we filled the sink
up and did the normal, you know, soak,
rinse, soak, wash, rinse type process.
All right. Now that we've established
that the tanks are at least 80% full,
we're going to start draining them. Now,
there's a couple things that I do maybe
a little bit different. I don't come
right in here and immediately open up my
black tank and start with that. I'm
going to hit the gray tank just for a
moment and I'm going to just let a
little bit of liquid go in and just wet
the hose going to the uh sewer. Then
once I've done that, now I'll pull the
the black tank and I'll just let it
empty
out. And while it's emptying, I'm going
to get my flush uh hose and connect it
over to the
um gr the black tank flush. And you'll
see why we're going to do that next. Now
I've connected this and I'm going to
turn on the water and let it start
flushing the tank.
Now, the black tank has had an
opportunity to remove most of the
liquids in it, but unfortunately, what's
going to happen is some of the solids is
going to stay in that tank. So, what we
want to do is we want to do a good flush
on that at least probably two times to
make sure we push all those solids out.
So, what I'm doing is I now have the
black water flush connected. I'm running
water from the faucet
into the black tank. And so what I'm
going to do is I'm going to close the
black valve and let that water build up.
And I want to make sure that I get about
80%. So to do that, we're going back
inside. We're going to watch the monitor
and when it gets up to about 80%, we're
going to come out and flush again. So
let's do that. So now I'm inside and I'm
going to come over to my black tank
monitor and I'm going to hit the button.
I'm going to hit it twice. And you'll
notice that right there there's a dot
next to the value. That dot will keep me
informed on what's going on with that
tank and it won't cycle off. So, it will
stay on. So, I'm going to stay here and
I'm going to be totally focused on this.
I'm not going to multitask or anything.
I'm just going to watch that monitor and
when it gets up to
80%. Then we will go outside, pull that
black valve again, and let that fresh
water that we filled the tank up do
another flush
through. We're now at We're just heading
up to 31%. So, it's starting to
climb. This is important that you stay
focused on this. you don't multitask
because you can get into a situation
where you forget about this and you can
overflow your tank and that's what you
don't want to do. Now, there are other
ways of doing this. You can actually get
attachments for your hose that will
measure how much water you're putting
into your tank by gallons and so that
you could watch that and if you know the
value of your tank, you could just shut
off when you hit about 80% of that. You
want to leave that a little bit of a
cushion in there just in case. So, you
don't want to go take this up anywhere
near 100% or even 90%. I think 80% is
about right. And what you're going to
find is I'm going to watch this until it
gets up into about 70%. That's when I'm
going to leave and go
outside and open up the valve because by
the time I walk around and get out
there, we will have hit
80%. We're at 50%.
This isn't probably the most exciting
video, so we're going to fast forward a
little bit till we get to the 80% point.
At least for you guys, I'm still here
watching. Okay, as you can see, we are
at 75%. So, we're going to head
out and drain that water out.
[Music]
All right, get this
set. Okay, pull this. And what's going
to happen is you're going to find that
even though this has been clean water
going into the tank, it's still going to
come out on the brown side. Right now,
I'm actually not going to show you any
of that cuz you've seen that before, I'm
sure, as you as you've dumped your own
tanks, but it's coming out. It's kind of
it's getting a little more clear as it
goes along, but it's still got quite a
bit of brown with it. And what you're
going to find is there's still a fair
amount of solids in this tank that
you're getting to push out. And you want
that weight of an 80% tank to force that
solids out of there. And it usually
takes a couple of times. And when you
get towards the end, you're going to see
some solids kind of working their way
out. And what actually what I'm going to
do is I'm actually going to do this a
second time. That second time, I will
get clear water out of it at the end.
So, I'm going to close this. We're going
to repeat and flush it. And because
you've seen all this, we're not going to
go through that whole process again.
We're just fast forward to where I'm at
here.
Flushing. I'm pulling the valve. I'm
going to let everything run out. And
again, I'm going to watch the liquid
that's coming out, and it should start
to run a lot cleaner by the end of this
flush. So, this is the second time I've
run the tank up to 80% and flushed it
out. And the water is looking a lot
cleaner. It's not 100% clean. It's not
crystal clear, and it's definitely not
anything I'd ever drink, obviously, but
it's coming out pretty clear, and it's
moved most of the solids out. So, I'm
feeling pretty good about that. So, I'm
going to let it keep going. I've still
got the water running into the tank. So,
I'm going to let it go until it's pretty
much down to the tank being empty and
there's just the water flowing through
it. Once I get that point, and I'm
pretty happy that everything's been
flushed out, I'm going to close this
valve. And now I'm going to turn off the
water going into the tank because I want
to trap a little bit of water in there.
I don't want the bottom of the tank to
be dry. I want it to have just a little
bit of water.
Okay, so the water's turned off to the
flush. Now I'm going to pull the valve
on my gray tank and I'm just going to
let that run out and that will flush out
my hose, make everything nice and clean
so that when I go to put things away,
um, I'm not dealing with a very
contaminated hose. I'm still going to
use gloves. In fact, you can argue that
maybe I should use gloves at this point,
but I'm not touching the hose. I'm not
touching any of the fixtures. I'm just
touching the valves. So, I feel
comfortable not using gloves, and I will
wash my hands once I'm done with
this. Now, my gray tank, I'm going to
let the water just run until it's
completely out. That way, I've got a
100% full tank. On the black tank, you
typically don't have the same volume of
liquid going into it, but you want to
have a fair amount of water in there.
And so, one of my tips is going to show
you how to put more liquid into your
black
tank. Still going just a little
bit. Now, in a case of our trailer, and
maybe your RV may be
similar, the gray tank is the sink and
the shower. The black tank is the
bathroom sink and the toilet. So, I am
putting additional water into the black
tank, which is good because you want the
liquids in there to move the solids. Um,
but we also add a little more water in
there, and that's going to be one of my
my next tip for
you. All right, we're down. Everything's
drained out. I can close the valve off,
take my
um flush hose off the trailer, and we're
all set for this week.
So, here's a tip for your shower.
Actually, two tips for your shower. One,
we have an onoff valve on our shower
line. Now, most RVs have one of those,
but you'll notice that they typically
trickle water. This is an solid onoff.
So, if I bring the shower down, turn the
water on, you can see nothing's coming
out. If I hit the switch or the valve
here, I'm going to get water, but I can
turn it 100% off. No water's coming out.
Our second tip is this
picture. So, we all know when you get in
the shower in the morning and take your
shower, you got a bunch of cold water
coming before it the hot water from the
hot water tank gets to your shower. This
is our remedy for that. So you don't
just let that water go down the drain.
We will capture all that water in the
pitcher. So I take the pitcher, the
shower head
here, and I hold it over the pitcher and
I do that until I get hot water coming
consistently into the shower head. And
you'll be surprised, typically with Dian
and I, we will fill this pitcher with
both our showers. So the question is,
what do you do with that water? because
you're not going to put it down the
drain. I will show you. Okay. So, now I
have a picture of water. And what I'm
going to do with it is I'm going to come
over here to the bathroom. And so, I
have this picture of water. Typically,
what we do is I will cover it up and I'm
going to put it right back here behind
the toilet. And then we're going to save
that for when we need water in the
toilet. That way, we take that water
instead of putting it into our gray
tank, we're putting it into our black
tank. and we just pour some into the
bowl or the toilet, fill it up as
needed, and then usually by the next day
it's empty. And that's how we move water
from the gray tank essentially that
would go into the gray tank into the
black tank and gives us more liquid in
our black tank. And in reality, what we
end up having is both our tanks will
fill up at about the same point. And we
can run our gray tank much longer than
we would if we just let all that water
fill the tank.
I want to take a couple minutes to talk
about what you put in your black tank
after you drain it because that's is
important. A lot of people buy these
chemicals at the camp store and
everything. And it says it breaks down
the waste and tissue and has a super
enzyme um performance. Really what these
things do is it does break down the
waste. It makes it into a sludge. And
that sludge is actually harder to get
out than the solid waste. So avoid these
at all possible. This these are going to
cause you more problems down the road
than they're
worth. My recommendation is this little
mixture that was shared with me by a
company that maintains
uh black tanks and they will come out
and actually flush your black tank out
if you want them to. And so this is a uh
a mixture of pine saw and keggon bath
beads and water. So, for a gallon of
this, you're going to mix 40 ounces of
pine saw, 8 ounces of Kelgon bass beads,
and then fill the rest of the gallon up
with water. And what you want to do is
you want to put in about a cup of this
after you drain your tank. And remember,
we said we put a little bit of water
back in the tank. We didn't leave it
dry. So, my recommendation is going to
be that you got maybe a gallon or so
water in that tank. maybe a couple
gallons. Um, for our tank, we have a
40-gallon
tank. And I'm going to put about a cup.
And so, this is a one cup
measuring
device. Actually, it might be just a
little bit more than a cup, but it's a
measuring device. And so, I'm going
to pour in roughly about a cup of this.
about there. And I'm going to pour this
into the right directly into the
toilet. And what it does, it does two
things. The Kelgum bath beads coat the
inside of your tank and allow things not
to stick to it. That's especially
important for the base of the tank so
that your solids will slide off of it
easily. But it's also important that it
doesn't um stick to your sensors for
your uh um water level sensors. Now, you
can put this in both the black tank and
the gray tank, and it works great for
both because it's going to do the same
thing in your gray tank. It's going to
help that, you know, stuff flow out. The
pine saw is like an air freshener. So,
when you get that nasty odor from your
black tank, this actually helps to cut
that down quite a bit. So, this is our
recommendation for what you should do
after you drain your tanks and put this
solution in there. Hopefully, you try it
and I think you'll like it. Well guys, I
hope you found these tips on managing
your black and gray tank useful and
hopefully you learned something out of
all this. If you have any tips for how
you manage your black and gray tanks
that I didn't cover, please share them
in the comments. We'd love to hear about
them. I'm sure other people seeing this
video would like to see your tips as
well. If you are not a subscriber to our
channel, please subscribe. We post
videos like this on a weekly basis and
we'd love to have you follow along with
our adventures. They're not always
how-to tips, but sometimes we actually
go places and do things. So, we'd like
to share that stuff with you, too, as
well. So, until the next time, guys, we
shall see you down the road. Bye.