Traditional Chinese Dressmaking Techniques are COOL (A 1930s Qipao ft. Claire Zhang)

Fine Arts
22 followers
#Fine arts
Traditional Chinese Dressmaking Techniques are COOL (A 1930s Qipao ft. Claire Zhang)
Comments are disabled for this video.
It's a cold, dark October night,
and what better time to get started
on sewing spring projects.
Hello!
Hi!
Welcome.
Thank you, thank you.
I have a fantastically skilled colleague, Claire,
who I went to university with.
She's gone on to do some incredible work
in reconstructing historical Chinese dress,
and I thought it could be fun to invite her into the studio
so that we could have a little peek over her shoulder
as she puts her incredible knowledge into practice.
Claire will be working on a 1930s qipao,
a woman's dress hugely popular from 1920s China
all the way up to today.
Although a relatively modern garment,
the Chinese tailors used a combination
of traditional Chinese sewing techniques
combined with Western tailoring techniques
that got introduced around this time,
many of which were so practical,
I can't wait to experiment with them in my own practice.
Oh, is that a real one?
That's a real one, yeah.
Wow!
We can start to think about the garment pattern,
which Claire is about to show me
on a real 1930s qipao is ingeniously simple.
So it's basically a T-shaped garment.
Right.
It's all cut from one piece of fabric,
except the inner placket.
Huh.
So this is the dajin, it's the front placket,
and then the dijin,
so this is just so that your skin doesn't get exposed.
So it's basically a very long strip of fabric.
Huh.
That you fold along the shoulder seam.
Yeah.
And then you cut it here,
and then you piece like this one bit down here.
Yeah.
And then that's the whole garment.
There is no dart, nothing on the bust,
nothing underneath the sleeves or around the arm's eye.
There's no waist dart either.
It's all just done with cutting.
Wow.
What you do is just,
you fold it along the center front and center back.
Then you fold it like that again.
This will then be the shoulder.
This is the collar.
And then you just draw the pattern straight onto it.
This is the front placket bit.
Draw the rest of the garment.
Cut the four pieces together.
Cut it out here, just on the top.
Then you flip it around.
You just cut a hole here for the collar.
And then it's basically the dress done.
The issue with this is that it needs to have a facing.
If you're gonna piece another fabric into it,
then there will be a seam allowance
that you need to trim away.
Right.
And then there will be a one centimeter gap
between the two.
Because it's cut in one piece of fabric,
there's no way to work around that,
except for reshaping the fabric a bit.
So what people did back in the days
was that before they draw anything,
they would pull the top layer out from the shoulder
and then slightly change the center front seam.
And then when they draw this,
and then because I pulled the fabric down right in the middle
I can cover it up by lifting the fabric up.
So there's a bit of overlap in between.
So once you put in the seam allowance,
the seam allowance would be like here,
but then it can still be covered by the top fabric.
The only thing with this is then the fabric
would be slightly tilted,
which is why if you look at this,
if you look at the shoulder,
it's not on a straight grain.
Wow. Oh, that's so cool.
Historical silks, however,
often tended to be woven on very narrow looms
and Claire's vintage kimono fabric is no exception.
Because this fabric is really narrow,
I have to piece it together along the center front
and center back seam.
Okay, piecing is period.
Piecing is period.
Yes, stunning.
It matches you.
Yeah, okay.
Success.
That bodes well.
Yes.
So before she can get started cutting out,
the fabric first has to be stitched together lengthwise.
And as I only happen to have a, by this 1930s period,
rather outdated treadle sewing machine in the studio,
we first have to introduce Claire
to this very antiquated stitching technique.
There you go.
Nice.
Oh, wow.
Yeah, there you go.
This is so cool.
Yeah.
Don't panic.
That's a seam.
Oh my gosh.
It matched.
Oh, success.
Okay.
Success.
Stunning.
Before we can get started with construction,
we first have to make a couple of preparations.
The first being a very large ironing table,
wide enough to fit entire widths of fabric
to shape the garment.
Ah, yes, 153.
Nice.
Cool.
That's just enough.
One more additional preparation step,
treating some fabric that will soon be made up
into decorative binding with homemade starch.
In the end, it will look something like this.
Oh, wow.
It's like a glue.
Yeah, it's basically glue.
Wow, okay.
We call it jiangfu,
which is actually the same word as glue in Chinese.
Clothes is probably starch, but it's not starch.
But yeah, it's really simple to make.
It's just flour, like plain flour
that you use to make pancake
and then mix it with boiling water.
So we need about three spoonful.
Well, I say three spoonful.
I'm like topping it up.
Yeah, I just dump the water in.
The first time I did it, it was actually quite tiring.
I had no idea how much manual labor goes into this.
It looks really tasty.
It looks like dough.
I know, right?
It's basically dough.
It is a dough.
Wow.
You just let it sit there for five to 10 minutes
just for the water to fully soak in
and then for the starch to get fully cooked
and then we'll go on to the next step.
Nice.
It looks a bit softer, but it's a bit grainy.
Just need to stir it.
Nice.
To make it more consistent.
And you want to stir it in just one direction,
just to keep it also consistent.
Oh my God, this is like bake-off.
Y'all didn't think you were signing up
for bake-off on this channel.
And we just pour the water in
and then wait for about a minute
and then dump it out and then stir it again.
Oh, okay.
Yeah.
Cool.
So I have to repeat it five, six times.
This is a whole process.
Like it's a whole step.
Yeah.
Yeah, but it's looking good.
And the color is very bright
and a bit like translucent kind of.
So nice, so delicious.
Time to make it crunchy.
I'm going to use a very professional tool,
which is the Gristides Diamond Value Club card.
What, you're saying that in 1930s China
that we're not using Gristides cards?
I know, shocking.
It might have been open in the 1930s.
1888.
It's historically accurate.
Okay, we're good.
It is historically accurate.
I'm using this historically accurate
Gristides Diamond Value Club card.
Wow.
To apply the paste onto the fabric.
Yeah, I'm going to get my hands dirty.
I've tried it with palette knife.
I've tried it with more expensive,
more valuable credit card.
Nothing works as well as Gristides card,
I'm telling you.
Wow, so satisfying.
So I'm going to just do a few rolls.
Oh my God, that is so satisfying.
I know, right?
Wow.
Yeah, it's still quite wet right now,
but I'm going to iron it later.
Once it's ironed, it's going to just be really stiff.
It's going to be like this newspaper.
So now it's just ironing, and because it's silk,
and because it's pancake,
I need to put a piece of cloth on top of it.
So it doesn't actually cook the flour mix underneath
and make it yellow.
So crunchy.
Can also do this, which is to soften up a bit.
Oh wow, yeah, that really does make it look a lot like
softer.
Wow.
And then the other side, it's still shiny shamoos.
So basically I've got these two pieces of fabric.
I'm making bias tape.
I need to make the bias trimming all around the dress.
So I need to make about seven and a half to eight meters
for each color.
So it's going to be two centimeters wide
with half a centimeter on one side
and one centimeter seam allowance on the other side.
So I need 12 rows.
That makes it 42 centimeters wide.
This is eight strips of bias tape.
Oh wow.
So if I fold it by half, fold it again.
Oh yeah, yeah, yeah.
And then fold it again,
then that's eight perfectly even bias.
Oh yeah.
And now if you open it up,
then there's this very clear line.
So I'm just folding it by half again.
I have a very strong love-hate relationship with it.
Oh yeah, I bet.
It's so satisfying, but it's also so time-consuming.
Yeah.
What is this creation?
This is comarking a waterline.
Ooh.
Which I'm going to run it through my mouth
and then basically using my saliva to wet the seam here.
Ooh.
So it's easier to fold it.
Oh, cool.
Yeah, so this line is now wet.
And you just press it down like that.
And then the final.
And this will be a very crisp seam.
Wow, that's so cool.
Some people will find it gross, but I think it's okay.
The next part is folding the bias
and it's going to be two-fold,
so it's going to be like that.
Five millimeters here, one centimeter here.
Ooh, okay, so a little offset.
A little offset, yeah.
Oh, nice.
Yeah.
I'm just going to mark it with a very thick needle.
Wow, that's really effective.
Right, and because this is a needle
and it scrapes off a bit of the starch,
you can pretty much just fold it
and then it's already, there's a line.
Wow.
It's basically the same trick as making a waterline.
Put it here.
Oh, that's so cool.
Then this is like super easy to fold to place.
Wow, and it makes it so precise too.
Yeah.
And you also get a very crisp edge here.
I think it's the enzyme in your saliva
that breaks down the starch here.
Oh my God.
It's just on that line, it becomes thinner.
Yeah.
So when you fold it, it's crisper.
And it's just perfect.
Yeah, you can measure it.
It's just perfectly.
Wow, wow.
What it's going to end up looking like.
The green will go on top.
So it'll be two layers of bias.
Oh, that's going to be stunning.
Worth all of the effort.
Now I just got, what, 16 more meters to go?
You can do it, I believe in you.
I'll be fine.
Roughly two weeks later,
Claire has now completed all of the binding
and it's time to return to the actual body of the garment.
The fabric is folded in half lengthwise and then widthwise.
So all four quarters of the dress are sandwiched into one.
The next step is to warp the fabric a bit
to create that extra overlapping space
on the front of the dress.
And I've marked this one centimeter line here
and I'm slowly trying to move the fabric up to that.
So the whole piece is slightly tilted.
Just iron out the new shoulder seam.
That's the new shoulder seam.
Huzzah.
I'm basically just drawing the pattern on the fabric.
You need to take so many measurements.
Three measurements around the neck
and then bust, bust high and then waistline,
front waist, back waist, hip, like all of these places.
The start of the placket is from the center of the collar,
which is this point and measuring down 8.1 centimeters,
which is my neck height.
And then this bit is half of my chest point distance
and also measured my bust measurement,
which would make sure that the top of the placket
falls at a nice place on the body.
You want the placket to end like here.
So it's kind of like bust measurement going up
to the point where it's right below the arm's eye.
And that would more or less form a nice curve.
So I can just freehand it.
And yeah, that's the front bit done.
Well, eventually I need to cut this open,
but before that I'm just gonna free tack the edge
so it doesn't just unwind itself.
So I'm just getting a bit of the starch
on both sides of the seam,
but just like a couple of millimeters of it.
The moment of truth.
Because we've maneuvered the fabric a bit earlier,
now I can fold it along the shoulder seam underneath.
Right.
And if I fold it along that line,
then that will create an overlap.
But it's still not enough here
because it's only like a two millimeter difference probably,
which is why I now need to do something wild.
Oh.
So this bit is gonna be trimmed away in the end.
I'm just cutting it so I can pull the fabric open.
Wow, okay.
To like create that overlap.
Yes, okay.
But it's really to like force an overlap right there.
Brute forcing it to make it work?
Just brute forcing it to make it work.
That's how tailors did it back then.
Yes, ye olde historically accurate brute force.
Yeah, there you go.
Yeah, and there's a bit more overlap here.
I'm folding a variation of the bust dart.
Wow.
But I'm not sewing it together.
It's just leaving room for the bust.
There you go, that's the sleeve.
Wow.
This is the collar.
Oh, wow.
So all of these are gonna get trimmed away.
Then just need to like true up the curves a bit.
So it's not like a straight angle.
Yeah.
That's a whole dress.
Yeah.
Wow, look at that.
I've cut out the whole piece.
This is the sleeve.
This is the Xiao Jing,
which is like the part that goes
underneath the front placket,
which are gonna be on the inside of the garment.
But the only use of this is to make sure
that you don't like accidentally show your skin.
And the next step would be this process called blocking.
So what that does is that currently
the side seam of the garment is very curved
and the center seam is all straight.
We don't want that
because you want the side seam to be straight.
So with blocking,
blocking basically means using steam basically
to like reshape the textile.
So what I'm gonna do is use this really thick cotton thread
to gather the fabric here
so that it goes into a straight line
instead of being curved.
Huh, okay.
And then I'll push the excess fabric
into the center seam.
The fabric is then warped
according to which parts need more or less room,
pushing out along the center line
to incorporate room for the hips
and inward at the waist to reduce the amount of fabric
that will cut in in this area.
I'll just gather it a bit.
And this is the hip curve.
So most of the curve is on this end.
So most of the gathering should be around here as well.
And basically repeating the same thing
for all four layers of fabric
into more or less the same lengths.
And then I'll just match up all the notches.
Right now it's all like puckering up.
So I'll just take the iron.
You basically just shrink it down into there.
Yeah, basically shrinking the fiber down on the side.
Wow, that just like shrunk.
Yeah, and then all of these layers
that are more or less shrunk,
like there's a bit of a puckering still.
But as long as there's no like pleat stuff, that's fine.
Yeah, it'll just sort itself out.
It will sort itself out.
Because this bit is shrunken, but this bit is not.
So this will be like where the hips would go.
Right, interesting.
So essentially you're just doing all the work of the darts,
but without the darts.
You're doing it purely
in the manipulation of the fabric itself.
Yeah.
That is so cool.
This is something called tian tiao,
which is like a really thin piece of cotton
with a bit of glue.
We're just gonna iron it onto the seam to stabilize it.
Wow, it really just sticks.
Yeah.
Then you kind of see like this is the side seam.
This is the center front.
So this would be the waist.
Then this bit would be room for the bust.
That's waist, which is all flat.
And then this bit would be the hips.
Wow, okay.
With the fabric blocked and the new edges stabilized,
Claire can now safely begin basting together the side seams
in preparation for a first fitting.
So this is just the last step before fitting.
I'm just making the very quick version of a collar.
And this is a piece of fusible interfacing.
Wow.
It's a standing collar.
Wow, look at it.
Ah, it's so cute.
It is cute.
And then I have to put this on.
Huzzah.
Wow, that's fit.
Nice.
It's a dress.
The length of it is just like perfect.
Forbidden porridge.
Primary construction out of the way,
Claire is by no means finished
because now it is time to add some decoration.
Primarily this double layer bias binding,
which Claire is first tacking together
with the starch paste from earlier,
which is sticky enough to act as a temporary glue.
This is the bias binding.
Basically, I'm just going to do it along the entire dress.
And it's going to layer up like that.
So the starch is used to just keep it in place
while you sew it.
Pretty much.
Yeah, it's not like glued on.
No, we still have some stitch going.
Okay, that makes sense.
You would think silk fabric is easy to peel.
Oh, no, no.
Oh my God, are you going to have to do
the whole length of this like this?
Yep.
Oh my God.
It's about eight meters.
Oh my God.
Let's be fair, I could do this with a machine.
Choose not to.
That's true.
Well, there we go.
That looks gorgeous.
There's a special process for warping the fabric
to track smoothly around the curved edges.
And sometimes, this takes a little bit of patience.
Wow.
Next time we meet, about two weeks later,
Claire has at long last managed to wrestle
the bias binding into place around the tight curve
of the collar edge.
This is on the side seam.
Yeah, sleeve, side seam.
Got it.
All the way down to the hem.
And then, it's literally like all around the garment.
That's the hem, hem.
This is the other side.
And this is the front opening,
which I had to like turn it 45 degrees.
And then round it up to the curve
that I spent like 200 hours on.
Oh my God.
And then all around the collar.
Wow.
Stunning.
So I just need to attach the collar here.
Goes like that.
So the way people did it in the past
was that they made the collar detachable.
Oh, cool.
So when they need to wash it,
they just wash the collar by hand
and then they don't wash the garment.
Because everything is starched,
it's gonna be really hard to wash it
and the shape is just gonna deform.
This is like an extra piece of bias binding.
So I'm just backstitching it onto the collar,
like really close to the edge of the binding here.
And then once it's done, we can just flip it.
That would form the base of the collar.
Nice.
So when you turn it, it's gonna form a really nice
porous edge.
Almost there.
Looks dangerous.
It's kind of dangerous.
These irons break down a lot.
Yeah.
Wow.
One more bit of preparation
before the whole thing comes together.
The buttons.
Wow.
Yeah.
These are stunning.
The qipao is renowned for sporting
elaborately knotted buttons
made from thin strips of bias cord,
which of course Claire is about to make up
yards and yards worth by hand.
Wow.
Is she tying?
All right.
Making the button.
You can do it.
I believe in you.
Don't jinx it.
Oh, there's a trick.
Whoa.
Not yet.
Oh my God.
Wow.
That was, I don't know what I was expecting,
but it wasn't this.
Oh, it is a little basket.
Oh my God.
But also a pretzel.
Also a pretzel.
Oh my God.
That is so cool.
It's coming together.
Basically just doing this over and over again
until it's tiny.
Oh my God.
That is so cool.
Buttons is a very good reference
to see the quality of a qipao
because modern day qipao usually just have giant buttons
that are mass produced.
But if you look at the vintage ones,
they're all really small.
Wow.
Like the more time you spend,
the smaller they get.
The more expensive it is.
Yeah.
How many of these do you have to do?
Like 15.
Wow.
And it is so little and so round.
According to the timing on the camera,
it took you 10 minutes and 55 seconds.
Oh my God.
I love it.
It's like a little cabbage.
Oh, I love it.
As if 10 minutes and 55 seconds per button
is not enough for Claire.
There is yet another step
to the completion of these buttons.
And that is the addition of a little tiny pink sliver
of additional bias decoration
that goes in between the green.
Completely unnecessary.
Completely necessary.
It looks so good.
The design for the dress is very spring themed.
So it's like early spring
when the flower is just blooming.
So you see a bit of the pink flower,
but it's mostly green,
but like it will become blossoms very soon.
So that's the design of the dress.
Wow.
They're gonna look stunning.
This is like still a raw edge,
so I need to finish it.
And the first step is literally just to wrap it around.
So it doesn't fray.
And then just putting it up from the middle.
And then back.
Wow.
Oh, that is so fun.
I know, right?
That's like a basic button.
Now, just for the finishing touch,
adding on the buttons.
I've traced where the button should go.
So it's literally just sewing it right in the middle.
Wow.
Those are stunning.
The amount of work that went into
a single one of those buttons alone is just astonishing.
I was surprised to see how simple
the cutting and construction for this was.
And only the tiniest, tiniest scraps of fabric
were cut off to waste.
Unlike most Western garments from this and previous periods,
which are cut on extensive curves
and generate comparatively huge amounts of scrap fabric.
The curves in this qipao are worked
into the structure of the fabric itself.
And the primary construction consists
of just the two side seams,
resulting in such a close fit
with really minimal waste or construction hours.
I thought it was going to be two months.
Took us the entire six months to do it.
It's all the binding and the buttons
that make it a painfully long process.
You saw how quick cutting and sewing together
the dress was.
If you go without binding,
you can make the dressing one day.
I don't think I ever want to make
that wide of a binding again,
because it was such a pain.
I say that, but I'm actually planning a project
with a wider binding.
I've seen you wear it.
Yeah. A lot.
Yeah, I wore it to a couple different events,
which was fun.
You can find more of Claire's work
on her own channel and Instagram,
both linked down below.
And if you liked this video,
you might also enjoy some more
historical reconstruction projects,
which we've put together in a playlist for you to peruse.
And be sure to subscribe so you don't miss
on all the exciting new projects we have to come.
See you and on.
Nope, there are too many cars.
Bro, this is a side street.
Oh my God.
Why are there...
Yeah, just, you know,
inhabit the space,
examine your surroundings,
be glamorous,
go for a jog.
Ha ha.
