In this video I’ll show you how I turned an old broken aquarium into a thriving underwater ecosystem! I’ll take you through the entire step by step tutorial and give you plenty of tips and tricks throughout. Enjoy the video:)
A few weeks ago I was moving this cube aquarium and I accidentally broke it.
Instead of just throwing it away I'm going to take the opportunity to turn it into something new.
The first thing that I need to do is separate all the glass panels.
Usually a sharp blade like this one does the trick but these glass panels are really
sandwiched together so I'm going to have to break out the fishing line.
I'm using the fishing line like a saw to cut through the silicone between the glass.
This is a great method to try especially as you haven't got to mess around with sharp tools.
Now I'm slowly pushing the glass away and cutting the silicone as I do so.
Eventually it will be weak enough that you can just pull them apart.
With all the glass separated I need to give them a slight clean up
before I can start cutting them to size.
The sharper the blade the better as the silicone can be really quite stubborn.
They're certainly not perfect but they're clean enough to move on.
Now I'm going to take some time to decide on the size tank that I want to make.
Due to the limited amount of glass I think I'm going to go for a shallow tank mini pond style.
I'll put all the dimensions that I'm going to cut up on screen now as well as in the description.
The first step before cutting is marking either side of the glass with a sharpie.
To cut the glass you won't need any fancy machines and you just need a ruler
and a glass cutter like this one.
A really useful tip is to place a few pieces of blue tack on the underside of the ruler.
This stops it from sliding on the glass and results in much straighter cuts.
Another essential you'll need is some safety glasses as the last thing you
want is to get some glass inside your eyes.
Before cutting I line the glass cutter up to ensure the tip of the cutter is right on the
mark of the pen.
Once I'm happy I'll firmly press the glass cutter down and pull it back in one continuous motion.
You don't want to score the glass more than once as all that's going to do is blunt on
your glass cutter.
With the score line made it's time to break the glass in two.
I'm placing the line on a straight edge and then firmly pressing it down until the
glass breaks.
Some gentle and precise taps can also be effective.
The reason for the wood is that it helps keep even pressure throughout the entire length
of the glass.
Don't be intimidated about cutting glass as it is easier than you might think.
You'll certainly make some mistakes as everyone does but with some practice you'll get there
in no time.
I'm going to go ahead and repeat the same process until all the pieces are cut down
to size.
Now that all the glass has been cut I need to sand the edges as they really are quite
sharp.
Ensuring the sandpaper is wet helps eliminate any glass dust.
With all the glass sanded, cleaned and dried it's time for the assembly.
To make this as easy and as smooth as possible I've got all the glass ready in their respective
locations and I'm placing some electrical tape on the glass which will help anchor it
down whilst the silicone dries.
Make sure you use aquarium grade silicone or 100% silicone.
You should aim for the beads to be roughly the same thickness of the glass or slightly
thicker to be on the safe side.
I can now carefully assemble the tank and lock the glass in place with the electrical
tape as I do so.
To minimise the chance of leaks I'm going to add a secondary bead of silicone on the
interior edges.
I'll then use my finger to smoothen out the silicone followed by adding the final
panel of glass.
After 24 hours the silicone is fully cured and it's time to clean up the tank.
I'll start by removing the tape and then using a sharp blade to cut away all the excess
silicone.
The tank is looking great and it's almost complete but there's still a few more steps
before I can start building.
Firstly I'm going to flip the tank over and attach a mat to the bottom.
This is recommended for rimless tanks as it helps protect the glass from uneven surfaces.
Next I'm going to install the lighting.
I'm using this Chihiros light as it can easily be mounted on the back in a seamless
and discreet way.
I'll be using it at about 50% power as it might be a bit too bright for a low tech
setup like this one.
There'll be links to all the tools, materials and equipment for this build in the description
below in case you're interested.
The last essential step before I can start building the mini pond is to give the tank
a water test.
9 times out of 10 there's no leaks whatsoever but it's always good to double check before
you've got the tank fully complete.
I'm simply filling the tank with water and then I'm going to leave it alone for a good
few hours.
A good amount of time has passed and there's no leaks so it's time to get started with
the build.
The idea for this build is to make a low tech, no filter, island style aquarium.
I want a decent sized rock in the centre as the focal point with space for the fish to
swim around it.
To start off I'm pouring in about an inch of sand.
I'll need to add some nutrients under this sand later but for now it's going to allow
me to experiment and build the hardscape.
To construct the central island I'm going to use these dragon stones.
They've got some amazing, unique detail to them and I love their natural colouration.
As with all hardscapes there's a lot of trial and error that goes into finding the right
design.
After a while of experimentation I decided to replace one of the large rocks for a smaller
one and I think it fits the scape much better.
As you may notice I've arranged the stones in a way that makes them look like one single
large rock.
They're pretty unstable at the moment and the last thing I want is for them to fall
and crack the glass so I'm going to lock them together with the super glue and tissue
method.
I'm wedging the tissue between the contact points and then soaking it with some liquid
type super glue.
This is 100% fish safe and it's a common practice in most aquascapes.
Once dried it's strong enough that I can pull the entire hardscape out in one single
piece.
Now I've got the hardscape ready I'm going to empty the tank and start off with the
nutrient layer.
I could have added the nutrients from the start but throughout the experimentation with
the hardscape it's going to get mixed up with the sand and could cause algae problems
in the future as it's not properly capped off.
This here is some garden compost and it's going to go right at the base of the aquarium.
This stuff is loaded with nutrients so it can't be left open like this otherwise there
will be some major algae issues.
After giving it a good spray down I'm going to cap it off with some sand.
This will stop the nutrients from leaching into the water column yet they'll still be
accessible through the plant's roots.
I want this layer to be relatively deep so I'm adding a bit more sand throughout.
As you can see the depth of the sand slopes up as it gets to the back of the aquarium.
This is a simple trick that will help add some depth to the scape.
I'm now placing the dragonstone back inside the scape and adding some small rocks underneath
which will help give it some stability and support.
I'm using the same method as before to lock these rocks in place just to make sure the
rock doesn't topple over.
As you can see it's really quite sturdy and it's going to survive being bumped into
throughout planting and maintenance.
At the moment the sand is really quite plain and boring so let's fix that.
I've placed in some small pieces of dragonstone and now I'm going to add some gravel.
I'm starting with some small pea gravel and then I'm going to add some larger ones on top.
Just like that the foreground is completely transformed and it looks a lot more natural
with much more detail.
Now that the hardscape is done I'm absolutely loving how this shallow pond is looking so far.
Before I start planting I'm going to give the entire tank a really good spray down.
I prefer to plant into damp substrate as it stops the plants from drying out so quick.
With that done it's time to get to work with the planting and I think I'm going to start
off with the background.
I think the perfect plant for this is going to be some rotala green that will grow nice
and tall to fill out the space.
A slight mishap after closer inspection the plant inside doesn't actually seem to be
rotala whatsoever.
There must have been a mix up at the factory and the wrong plant has gone inside both of
these pots.
I'm not actually 100% sure what it is as it's still so small so some help in the comments
would be great.
My best guess is cryptopava due to the cramped growth, small leaves and rhizome at the base.
Despite this slight mishap I'm still going to go ahead and use this plant in the background
as this is only a shallow tank and hopefully after some time it will grow tall enough.
I've split both pots up into lots of smaller sections that I can now plant throughout the
background.
I like to plant them nice and deep as it stops them from being easily uprooted once the tank
is filled up.
Aquatic plants are prone to drying out so a light spray down every now and then is essential.
Next I'm going to plant in some epithites starting off with this anubias.
I can simply wedge it between the rocks and it will pull its nutrients from the water column.
These types of plants are susceptible to rotting when planted into the substrate so this is
the way to go.
Next I'm going to plant in a few different types of Bucephalandra in the same way.
I want to plant this one over here but there's nothing to wedge it into so I'm going to have
to take a different approach.
I'm adding a small amount of super glue to the rhizome and then attaching it to the rock.
This doesn't hurt the plant so long as you don't use overly too much.
I've wedged a few more in in gaps between the rocks at the base so let's move on to
some other plants.
I'm going to plant these throughout the foreground to add a bit more detail and variety.
I love the delicate round leaves of this plant and it's going to slowly creep and grow throughout
the foreground.
For the most part I've selected slow growing plant species that won't overgrow the tank
too quick which will make maintenance much easier.
I really don't want to overdo the planting as I want to leave plenty of room for them
to grow in so I think I'm going to leave it there and fill the tank up with water.
The piece of bubble wrap disperses the water and stops it from disrupting the sand or uprooting
the plants.
As for water it really couldn't be simpler, it's just regular tap water that's been
dechlorinated.
I think some immersed patches of moss grown on the dragonstone would suit this scape really
well.
I'm going to pinch a few patches from my giant vampire crab paludarium.
This species is known as Christmas moss which is a slow growing moss that grows great both
in and out of water.
I'm planting it in ensuring that the base is in contact with the water which will help
keep it hydrated and prevent it from drying out.
I'm thinking of planting this peperomia on the dragonstone growing immersed from the
water.
I've removed it from the pot and cleaned away all the soil so it's just bare roots.
To be honest I can't really find a spot where it sits well and fits the scale of the
scape so I think I'm going to give it a pass this time.
Something I do want to add before I leave this tank to grow in are some floating plants.
This duckweed will not only add some nice detail to the water's surface but it'll
also pull nutrients from the water column which will help prevent algae.
Now it's time to leave the tank alone to grow in and establish.
60 days have passed and this shallow pond aquarium really is thriving.
I'll get into the inhabitants living throughout the tank shortly but first I want to quickly
talk about the plants.
Although it only might be a little all the plants have got some healthy new growth.
Slow growth is expected in a super low tech setup like this one and it's actually beneficial
as fast growing plants would overtake the scape too quick.
As for the plant in the background it's healthy but it hasn't grown tall whatsoever.
I'm gonna leave it be for the time being but I am tempted to switch it out in the near future.
As I'm sure you may have seen I've added a few different inhabitants that call this
ecosystem home.
The first creatures to go inside were these tiny snails that I added about a week after
planting.
They're only small but they're always at work keeping the tank nice and clean.
The next inhabitants to go inside were a small group of these beautiful red cherry shrimp.
I absolutely love these tiny creatures and in my opinion no underwater ecosystem is complete
without them.
About two weeks ago I added six of these stunning emerald rasboras.
I've had these guys for about a year now and they've been living inside the giant vampire
crab paludarium.
The reason I've taken them out is to give the shrimp inside the paludarium a chance
to actually breed.
Despite their tiny size these guys are such great hunters that they manage to pick off
almost every single one of the shrimplets.
In their absence the shrimp population should bounce back nice and strong.
It's crazy to think that the only reason this ecosystem came about was because I accidentally
broke one of my aquariums and decided not to just throw it away.
I think it just goes to show that we can always make the best out of a bad situation and turn
something old and broken into something new and beautiful.
As always I really hope you enjoyed this video and thank you for watching.