SketchUp Tutorial Mapping Image Texture pada Kapasitor ｜ Pap Rendi

Hello, welcome to Pap Randy's channel. Greetings, stay positive. This time we will learn how to make 3D using SketchUp in the form of a capacitor. Focus more on the mapping image on the capacitor. In my previous video about the SketchUp tutorial, and there is a question from the channel sunandir01 asking if it can be applied to an electronic capacitor. Okay, let's just try it. Here I have googled the material, I have also edited it. The shape of the capacitor is more or less like this. Hopefully it's correct. Let's make the box first. Then import the reference image that has been downloaded earlier. This capacitor. I have edited this. We enter the image as texture. We adjust the composition first. We adjust the shape first if it fits. You can use the shortcut up arrow on the keyboard so that the move tool doesn't go there. So we lock it. Then we copy what we will use later as a reference for the mapping or texture. Then we cut it, we shape it, we divide it in half. Because in this method we will use the follow tool. We make the shape first using the arc tool. We shave the unnecessary part. It's already formed. More or less like this. Then we use the circle tool. Because we will use the follow tool to make a 3D shape. Click once, click once again. Delete. We reverse the faces because it's upside down. So it's messy like this. The first way is without using a plug-in. It's true what Kangsunandir01 said. This is not dead. Because the surface is curved. I don't know the easiest way. I use the manual method. Manual. For the top, it's straight. This curve is not a problem. But when the bottom is curved, it will change. It should be a little tricky. This is a softened or smooth edges. We make it smaller. We can see the lines. We correct it. We take the reference. We try to arrange the middle first. If it's appropriate. Just click, click. Then click, click. The bottom follows. Click, click like this. But not all. When it's curved, it's like it's cut. This should be a little tricky. Okay, let's arrange it first. Look at the middle to the top first. If it's okay, just click. Now let's try to divide it into two. The bottom. We see the appearance from the front. Select the bottom. We take the reference. This is a little effort. One by one. Click. Take a reference using the eyedrop tool. The shortcut is. Comment on Mac. And Alt on Windows. If I'm not mistaken. To be an eyedropper from Paint Bucket. If it happens like this. The reference clicks to the line. Wrong. So we don't click to the line. But we click to the surface. If you click to the line. It becomes messy again. Well. This is if it has gone down. You can just click, click, click, click. It continues automatically. Click, click, click, click. Automatically it continues down. Well, this is the reference. We can't because it will be messy. Let's try. Let's take it from here. It's okay. The left one is messy again. Because this curve. It becomes a stretch. Because this curve. The image we use as a texture. This becomes a stretch. One by one. One by one we click. One by one. Eyedropper Paint Bucket. Bucket. Paint Bucket. Well this. Tricky. We block the part we want to stitch. We zoom in. If this is one by one. But later if it has gone down. He does from. From the beginning. Folding or doing that. Go down again. He went inside. Just click, click. That's it. More or less like that maybe. Then next to it again. We use the same method. This is what makes the effort. If manually. Because on the part that is done. Must be manual. I can only manually. If you don't know maybe friends. There is a more effective way. If there is. You can write in the comments column. Because I still want to learn. Besides that. I try to use plugins. It's much easier. But let's try without plugins first. Without plugins like this. One by one. Without. Here I got a reference. The picture only looks like the front. If Coca-Cola is. He looks at the front. Until the back. The surface. There is. I mean. At the end when he covered. The pool. More perfect. More visible. Finally can go around the whole pool. But if this. I only get. The front. So. Assuming the back is the same. But we are a bit tricky. Because there is a cut. Between. The front and the back. We have to adjust it a bit. A bit tricky. Okay. Now the other side again. A little more. Okay done. It looks like it's done. More or less like this. It's okay. I think it's okay. Let's uncheck. The hidden geometry. Okay now let's try. Use the second way. Using plugins. This plugin. I put the link. In the description. It's free. Free from. Extension Warehouse. Can be downloaded directly. Must register first. The registration is also easy. You can sign in. Or sign up using Google. Well. The second way. We use plugins. We whiten everything again. The texture. Then we take. Well. Let's try. We use. Front view. Well. We click. Click once. Then extension. Sketch UV. Click right. Then select the planar map. Boom. So. This is really simple. But there is a weakness. It's upside down here. The font. Because I have a reference. Just the front view. It should be longer. So front and back. But because I only use the front. So. It must be a bit tricky too. But using this. No need to click. Just click once. Click right. We can understand. So that the front. Which was upside down. Cut the appearance. So half. We select. Back view first. Back view. The back will not be clicked. We select. Then extension. Sketch UV. Click right. Planar map. So. Done. We delete. More or less like that. This uses. The second method is simpler. Using. Plugin Sketch UV. Which can be downloaded for free. In the Extension Warehouse. I will provide the link in the description. Okay. Thank you for watching. I hope this tutorial can help. Especially for. Kang Senandir 01. I hope. The question can be answered. Sorry. If there are still shortcomings. Stay positive. Stay healthy. Stay rich. Assalamualaikum warahmatullahi wabarakatuh. See you guys.