The Secret to Realistic Watercolor Painting

Arts and Design
68 followers
#oilpainting #paintingtechniques #realisticportrait #murals
⭐ I CAN HELP YOU 👇🏼
Create Beautiful Watercolors, Faster Than You Thought Possible, Without the Frustration !
➜ https://www.watercoloraffair.com/wate...
This painting started out as a sketch but after a while I began to think it would make a good
example for talking about how to paint realistically with watercolour. In this tutorial I'll show you
the process behind the creation of this watercolour apple. I'll also show you what you need to focus
on to be able to paint more realistically and how this can be achieved when you use watercolours.
So what makes a painting realistic? I believe the key to making a painting look more realistic is
values. Values are the way artists describe differences in tone ranging from the lightest
value, white, all the way to the darkest tone, black. Of course there are many other aspects
to painting such as edge control or correctly representing the proportions of a subject
but what really gives a painting realism is the correct interpretation of values.
Take this apple painting for example. Even though the edges are slightly rough,
does this really make the result look any less convincing? And if the proportions are slightly
wrong, would you really notice? However, if I paint it in a way which ignores the differences
in tonal value, it immediately starts to look flat and unconvincing. Values are what allow
an artist to interpret the lighting of an object and as a result create the illusion of depth and
three dimensions on a two-dimensional surface. You can build up a range of values in watercolour
progressively, one layer at a time. Because watercolours are transparent, each layer of
colour contributes to the final appearance of the painting. Each subsequent layer of paint becomes
progressively darker in tone. This allows us to use a technique known as glazing to increase the
values of a painting from light to dark and thus create a range of values which give the illusion
of depth and realism. This is the subject I chose for my painting. This photo of an apple has strong
lighting which results in a high level of contrast. This is good for practicing how to judge values.
Recognising values is a skill you can develop. Just making the effort to discern the range of
values in a subject when you paint can significantly improve the realism of your work.
Before painting this apple I started with a quick monochrome value study in pencil.
This exercise helps me identify the main shapes of different values on the apple.
When I'm observing the subject I try to find the shapes with significant differences in tone.
Doing this in black and white is easier than starting in colour. It's easy to see the bright
white highlights and the dark black shadow shapes within the cast shadow and the form shadows.
The side of the apple turned towards the light is made up of lighter tones and as the form of
the apple begins to block the light the values become gradually darker. But because the skin of
the apple is very shiny you can also see a lot of reflected light on the shaded side of the apple
where the values become much lighter. Notice however that even though this reflected area
looks very light compared to the shaded area it is still relatively dark toned. Next I made a series
of test mixtures to try and match the colours of the apple. For this painting I used a light yellow
green for the brightest values, an olive green for parts of the reflected light, a bright saturated
green for the mid-tones, a dark neutral green for the shading and a warm grey mixture for the cast
shadow. If you'd like to follow along and try this watercolour painting yourself you will find a
link below this video where you can download a copy of the reference photo and a sketch template
which you can transfer to watercolour paper. We're going to use a wet-in-wet technique for the first
part of this painting. Basically this means painting onto an already damp surface. After
sketching the outline of the apple onto the sheet of watercolour paper I begin by wetting the apple
shape with clear water. When doing this make sure to leave the two areas of bright white highlights
untouched. Remember that in watercolour painting the colour white comes from the paper. Start by
adding some light green to the lightest side of the apple. Then use a brighter more saturated
green to add colour to the areas of mid-value. I then used an olive green colour on the shaded
part of the apple and the side which has reflected light. As you paint don't hesitate to blot up some
of the colour if it spreads too far on the damp surface. To do this blot your brush on a cloth
and use the semi-dry brush to mop up some of the pigments. While the surface is still damp add a
more saturated colour to the areas of mid-value. Then use a darker neutral green to add the shadow
shape on the left. Don't forget to use your reference photo as a guide as you build up the values.
When you've filled in the whole of the apple leave the paint to dry. Painting the base layers using a
wet-on-wet technique like this helps begin to establish the values and colours while keeping
everything soft and blended. Before adding the next layer of colour use a clean wet brush to
dampen the apple shape, again making sure not to paint over the white highlights. Start by dropping
in a bright green colour into the areas of mid and dark values. Don't paint over the brightest side
of the apple on the right and the areas around the highlights and the reflected light. You want
these areas to remain very light in value. Use a blotted brush to lift coloured pigments if needed.
Next add a dark green colour to the shaded parts of the apple on the left and around the stem.
The colour spreads and diffuses across the surface nicely. Take advantage while the paint is still
damp to charge in an even darker colour to build up the darkest values of shading. Make sure your
paint mixture isn't too watery or you risk diluting the underlying wash of colour and causing blotches
or stains. Keep working while the paint is still damp. Blot your brush but don't rinse it so that
the tip is almost dry. Use the tip of the brush to tease the dark paint outward to create some
texture on the surface of the apple. Try to make the brush strokes follow the spherical form of the
apple. Move on to paint the cast shadow while you leave the apple shape to dry again. Start with a
warm grey colour for the outer edges of the shadow then use a darker colour the closer you get to
the apple. In real life this is how shadows tend to appear. They get lighter and lighter the further
they are from the object casting the shadow. So to make the shadow look more convincing charge
darker colours into the right hand side and near the base of the apple. When paint dries I start
building up the values for the shaded parts of the apple. This is painted wet on dry. In other words
I added some darker brush marks and then I blended out the edges using a blotted brush.
I also added some shadow to the stalk and increased the value of the cast shadow near the
base of the apple. After adding some detail to the stalk I let the paint dry before repeating
the process again. I added some dark valued paint to the shaded part of the core then blended out
the edges using a rinsed and blotted brush. While the surface is still damp you can see me using a
similar method as before to add some lines of texture by applying quick brush strokes to push
some of the dark paint outwards. Use the same method for the shaded side of the apple. Apply
some brush marks of dark paint. Blur out the edges using a blending technique then use the tip of a
dry brush to push the colour pigments around on the surface. Because the paper is damp this produces
some nice soft lines of texture. You will notice that your painting appears lighter each time the
paint dries. This is a typical characteristic of watercolour paints. Just keep building up layers
of paint until you are happy with the values. For example here you can see me deepening the tonal
value of the shadow with another layer of warm grey. Don't forget to intensify the cast shadow
on the stalk if needed. At this point I decided that the overall colour was slightly dull, so to
brighten up the green hue of the apple I added a few brush strokes of caugley yellow. The combined
effect of the underlying colour plus the new glaze of yellow helps to brighten up the final colour
appearance. The apple is almost complete apart from a couple of finishing touches. In the original
reference photo you can see the apple is covered in light coloured freckles. To achieve this I used
a lifting technique to remove some of the paint. Using a small stiff brush dampened with water
I'm scrubbing the surface and blotting up the loosened pigments using a clean paper tissue.
Similarly there are a few areas around the edges of the apple which need
lightening in tone. For this I used a damp cotton swab to rub the surface and remove some of the
colour. Don't overdo this or you can damage the surface of the paper. And here's the finished
result. The next time you try a watercolour painting try to push yourself to find the
correct range of values. You should find this will help create a more realistic representation of
your subject. If you enjoyed this video hit the subscribe button below to be alerted whenever I
release something new. Also if you'd like to receive some free watercolour lessons that I
only share with my newsletter subscribers follow the link underneath this video to sign up.
