🛠️ How to open ASUS ROG Strix SCAR 18 G835 (2025) - disassembly and upgrade options

LaptopMedia
183 followers
4 Video Views·Apr 30, 2025
🔬 In-depth Review: https://laptopmedia.com/review/asus-rog-strix-scar-18-g835-2025-review-an-absolute-beast/
📈 💵 Specs and Prices: https://laptopmedia.com/series/asus-rog-strix-scar-18-g835/
🎮 Subscribe to our GAMING BENCHMARKS channel:
https://www.youtube.com/channel/UCLJ-FnaQC5P7DAJnZz9YZFQ?sub_confirmation=1
Hello friends, this is the new 2025
version of Asus ROG stricks SCAR
18G835. This laptop features a new type
of rear cover with a locking mechanism.
There are no screws securing it, just a
dual marker locking system. The first
marker is located here. The red color
indicates the unlocked position. To
remove the cover, you should also see
red in this second opening. Just below
this opening is the second marker. Pull
the locking mechanism and slide the
cover in this direction. At this point,
the cover can be removed. This toolless
design allows for quick access to the
RAM, SSD, and fans with the new Q- latch
system on the SSD mount. Using just your
hands, you can remove and replace your
storage in seconds. So, both SSD drives
can be removed without taking off the
internal cover. They are 2280 sized PCI
Express 4.0 NVME drives. The same goes
for the two RAM sticks. In our case,
there are 32 GB running at 5600
MHz. If you want access to the whole
motherboard, you have to remove the
internal frame that is there to protect
the other components.
After removing the screws, use a thin
plastic tool to release the plastic
clips. Start here about 1 cm below the
outer surface of the
cover. The battery is a lithium polymer
model C41 N2109.
It has a capacity of 5,800 milliamp
hours and a nominal voltage of 15.52
volt. It stores 90W hours of energy.
Head on to our website laptopmedia.com
to check out the battery life and more
information about our battery tests. The
link is in the description below.
Here's the motherboard. To remove the
battery, we have to disconnect it. To
disconnect it, we'll first need to
remove this fan located above its
connector. The fan is secured with three
screws, but we only need to remove two
right now. The third was already removed
when taking off the internal cover. The
battery itself is secured by four
screws, but one of them is also shared
with the cover. So, we'll remove the two
for the fan and the three for the
battery. Let's start with the fan.
Then we'll remove the three screws for
the battery.
the battery connector lifts vertically
upward to disconnect.
To remove the SSDs and RAM, peel off the
protective stickers.
The SSDs are secured by a locking
mechanism instead of
screws. This laptop supports two SSD
slots and in this case both are filled
with two TB NVME M.2 2 SSDs from Western
Digital Model S
DEQNRG-2T00. Similarly, the RAM modules
also have protective
stickers. In our case, they are made by
SKH Heinix. You can find a lot of
performance tests in our detailed review
on
laptopmedia.com. Here is the Wi-Fi
modem. It is the Intelbe 2000 NGV
supporting the latest Wi-Fi 7 standard
with a 2x2 antenna configuration. It
offers ultraast wireless speeds, lower
latency, and enhanced performance,
especially on Wi-Fi 7 networks.
Bluetooth 5.4 is also included for
connecting wireless devices. And
finally, let's take a look at the
cooling system.
This laptop features an upgraded thermal
design aimed at delivering stable
performance, even under heavy gaming or
high load tasks. All exhaust vents are
positioned at the rear near the hinge.
This layout helps direct hot air away
from your hands during use. Air gets
pulled in from the sides, bottom, and
even through the keyboard area, creating
a highly efficient airflow system. This
helps keep both the internal components
and your hands cooler during long
sessions. At the center of the cooling
system is a custom-shaped vapor chamber
that matches the layout of the main
board. It extends all the way to the
back and is placed between two sets of
heat sinks, maximizing heat transfer
from both the CPU and GPU. The heat is
dissipated through dense cooling fins
without adding extra thickness to the
chassis. The system uses a triple fan
layout. Two main fans handle the air
flow through key components, while a
third assists by pulling additional heat
away from the graphics chip and video
memory. This setup ensures smooth
performance while maintaining low
temperatures. And to top it off, all
intake vents are equipped with dust
filters. These help prevent dust buildup
inside the machine, keeping the system
running efficiently over time. If you
want to see the full benchmark results,
key analysis, the best prices, and
differences with its rivals, make sure
to check out our in-depth review on
laptopmedia.com. The link is in the
video description below.
