Unboxing from Cuemakersupply.com

[Music] What's going on, YouTube? Today's video, I'm going to be unboxing a care package from ActionBuilder Supplies. I received this care package from Chris and it came from actionbuilder supplies, but if you go to his website, it's actually qmakerupplies.com. He is now the proud owner of Mid-Americ. Um, he bought the the products from Todd before he passed away. Rest in peace, Todd. So, I haven't opened this box yet. Biggest thing is we're going to go open it. I don't know exactly what's inside. So, we're going to open up together and see what's inside and then I'll probably do some product reviews on it. So, I got the box cutter. So, let's go ahead and open this and let's see what is inside. Now that I have the box open, let's go ahead inside, look inside, and see what actually is inside the box. Oh wow, look at this. This is a lot of stuff for a care package. Oh my goodness. So, I got some tips. Looks like a leather. This is what I use for um holding the shafts and butts. This is what I actually use. Leather. And he gave me some stickers. So, let's go ahead open this up. This is nice. Oh, yeah. And it's rubber, too. So, it has a rubber so it won't damage the cues and the leather. So, that's awesome. I'll be doing a review on this and see how I like it. It looks like a for joints. And you put this on for the chuck when you hold the shafts. This is nice, too. It looks like it's 3D printed, too. I like that. Wow. This is a lot of stuff. Thank you, Chris. This is for the bed of the lay. Looks like it's also 3D printed. This looks like it's for a dial indicator. That is perfect. So, you will put your dial indicator here, and that way you always know exactly how far you're moving your um um the slide on the on the bed. So, I'll be using this. This is going to be helpful cuz that way I can actually have exact measurements. Oh, wow. Another 3D printed product. This I have to get a hold of Chris because I don't know exactly what this is. Someone in the comment tell me what this is. Looks like you put screws here. This might be also for a dial indicator, but we'll find out. Another product. This one looks like it's for drill bits. So when you guarantee this is when you put on the wall and then you put your drill bits here or your tools. This is nice. And it's 3D printed. I like that. and another product this someone in the comments if someone knows how to use this that would be helpful. I'll get a hold of Chris and ask him how to use that. Let's see what else we got. H for delay. So these are like for holding the This one is for holding the the drills on the um tailtocks. There we go. On the tailtocks. You can use I can use this that way quicker. And let me go ahead and show you how it looks. Here we go. You can also use it on this and put it through here. And then you can also lock it here. But normally my slide would have the the wheel. But so we look it would be actually for this. I'm sorry. Yep. This is what it's going to be for if I'm correct. [Music] So, I got to fiddle with this. Use the Allen wrench and tighten that up or just slide this back because I have my Allen wrench. It's not really called an Allen wrench. It's like a trademark again. Yep. So now I have a better lever on this instead of using this cuz this gets really small. You can see how small it is. And I actually cracked this. I had to actually epoxy this. You can see how I did that and super glue that. So, this is going to be helpful. Yep. Perfect. Now I have a better lever. Awesome. I got extras and got some washers to go with it. So, I got a lot of them. Actually got send me one, two, three, four, and that's the five. Ooh, this one's nice. Look at this. This is for tip shaper. I got nickel, penny, and dime. So now when I shave the tips, put this on the tool tool post and put the shaft here with the tip and then I can actually shape it now cuz I never had this. I always used um the boring tool as a rest. That's the way I've been doing it. And then he gave me a t-shirt. So let's open this up. It's a nice shirt. Look at this. Perfect. So, it has his last name and custom cues. So, I got a t-shirt. and another t-shirt. If you don't know, Chris also makes custom cues. He's been doing it for, he said, 14 years. So, look him up. I'll have, of course, the link to his um to the website on my description so that you guys can get it. But this is um you can see it here also on the shirt, which is perfect. Q maker supplies.com. So, this is what I received from Chris. And like I said, he has all the Mid-Americ um Mid-Americ culates in stock and he can actually um get you a a nice Q-Aid like how I have it. You can see what I've been using. and it is a workhorse and I'll probably do an updated video on that because the videos I have is on old and then I'll tell you a review on how that work um how it's been working for me. I just opened a care package from Chris from qmakerupply.com. I want to thank you Chris for sending me the supplies. Hopefully this video is informative. If you haven't already, hit the subscribe button, hit the like button, and leave a comment down below. Thank you for watching and see you next time. Thank you for watching. Please subscribe me. Don't forget the thumbs up. Bye-bye. I just Wait, leave it there.