Easy Watercolor Painting Ideas - Koi Fish

Collect Watercolor Paintings
41 followers
If you're looking for a fun and super easy watercolour painting idea to try, follow along step by step and paint some pretty little Koi fish with me!
#WatercolorPainting #PaintingTutorial #FineArts #Arts #Watercolor
For this project all you need is an ampersand aqua board
or you can use regular cotton watercolor paper if that's what you have and it'll
work just fine. I have here just a four by four inch
aqua board. It's basically a clay board with a surface
that's compatible with watercolor painting
and I'm going to start by sketching on two little fish.
You can put the fish anywhere you want just try to make a design that's
pleasing to you. To sketch a koi fish it's quite easy
you just need to draw a simple curved shape for the body
with a tail fin and a couple of side fins.
We're not aiming for perfection here. With this design we're just going to
make it super simple and just enjoy painting the bright colors.
You might have to erase to get the exact shape you want.
I wanted my tail to be just a little skinnier
and then I'm adding on a little side fin and then the smaller fin
towards the tail. My second fish is going to be a similar shape as the first one
but slightly turned towards the first fish. Again I just start with a curved
shape for the head add a little side fin and then just
curve the body around add a little tail and complete the shape. Taking clean
water carefully paint all around your fish
just avoiding the inside of your pencil lines.
You'll want to use a round brush for this so that you can be extra accurate
with where you put your water. Remember that where your water goes the
paint will go too. You can re-wet some areas if you want the
paint to float even more. Once you have a nice glossy surface all
around your fish you can begin painting on the water. I'm
using phthalo blue by KOR and I'm going to start with this
because it's such a beautiful brilliant blue
and I'm just dabbing it in on my wet aqua board surface.
You can see it just begins to bloom and spread.
I am carefully painting around the fish again but still for the most part I'm
keeping my brush strokes very loose and I'm not being too particular about
where the paint goes. I'm now grabbing some indigo for a
darker value in my water. It's totally up to
you how you want to design your colors and shapes here.
My third blue color is turquoise blue. This one is a little bit more
cool, has little hints of green in it, and adds a beautiful vibrant touch to our
water. If you want the paint to spread and blend
effectively you'll have to work fast while your
surface is still wet. The lovely thing about the aqua board is
that it lends itself very well to these kind of blotchy
blooming shapes on the surface. Normally when you're watercolor painting you want
to try to avoid blooms and using too much water because that can
actually look really messy on a painting but
with this one we're not really going for that.
Allow the paint to bloom and bleed as much as you want,
use as much water as you want, and just see what happens.
Adding little dollops of indigo here and there
it's so much fun to see where the paint and water are going to go.
Just follow your own intuition and add as many colors as you want in the water.
You can even manufacture some round shapes of droplets.
The idea here is just to create a design that makes you happy
and once you're happy with your design let it dry
before painting the fish. Now that the water is dry we can come back and paint
our koi fish. We're going to use the same method of
wet in wet. Be sure to change your water before you start painting your fish.
I'm starting the same way I did with the water. I'm going to wet the inside of the
fish with clean water using a smaller brush
and again very carefully painting inside of my lines.
Because we have to work fast with wet in wet we're only going to do one fish at a
time. I'm now taking some transparent orange
and painting it in. There's no right or wrong way to paint a koi fish. You can
drop orange or red or yellow anywhere you
want inside of the fish and it will still look like a koi fish.
It is important to leave a little strip along the back
to indicate the very top fin on the fish. I'm just adding a brighter red spot on
the right side and darkening up along the head. If you're
not sure how a koi fish should look it's easy enough just to google it and
find a coloring and design that you like.
I'm going to add a touch of lemon yellow to the left fin and the top of the head
and you can also come back once your water is dry and clean up some of the
edges a little bit. Moving on to our second fish I'm going
to start the same way by painting inside of the fish with
clean water. Make sure that you're using a round
brush that's small enough so that you can effectively
paint inside of these tiny lines. While your surface is still wet
grab another color and just drop it in. I'm using cadmium red this time and you
can see it's just blooming nicely inside of that wet
surface. Now you can see that my water overlapped a little bit and so if that
happens just take a clean damp brush and pull the color out.
I'm pulling or lifting a little bit of paint out of the back
of the fish again to indicate that fin on the very top of our fish and just
darkening up the top of the head.
Clean up your edges as needed
and if you want to add one last little detail take a dark color off your palette
and paint in tiny indications of eyes.
If you want to you can also add a few more colors to the background in the
water if you're still not happy with your
shapes. I decided to darken the left top corner one more time with some more
indigo. If you're using a quality paper or an
aqua board this should be no problem to add more
layers on top. A couple more droplets and I think it'll
be done. My goal here is to have a lovely and
balanced composition. And there we go there's our finished
koi fish design. If you enjoyed this video please hit that
like button and subscribe if you're new here.
Thank you so much for watching!
