2-tier flower arrangement: White lilies combined with roses

Beautiful flowers
9 followers
Hello everyone, I am very happy to meet you again in this video to share and learn with you the experience of flower picking in the first time.
Today, I will share with you a 2-layer flower with a pinkish tone.
This is a flower that is also quite difficult to pick because it is overflowing with the shape of this fan.
And how to connect the flower path to make it beautiful and soulful.
Actually, this is a fairly difficult technique.
But I believe that if we focus on doing it, we will be able to pick beautiful flowers like this.
And now I'm going to do it by hand.
First, I will use a bamboo frame.
Here, I have cut the bamboo frame to make it thin and I will put 2-3 leaves on top like this.
Now I will bend the bamboo frame so that it follows the curve like this.
First, we will bend a point at the bottom.
If we use a small wire, it will not be exposed to the wire and will be less dry.
After we calculate about 1.5 cm or more, we will bend it back to make it curved.
So it is curved like this.
Take a few turns.
Then we will turn to the inside.
We take our hand, we hide the curve.
In the video, I also shared the leaf pattern.
This leaf pattern looks very beautiful.
I got a curved edge like this.
Now I will put it in here.
I will put it in the back of the stem.
And I will put a shorter edge on top.
I will bend 2 edges so that it is curved like this.
And I will use this golden leaf edge.
I will bend it to bend more.
Here I bend the fish bone.
At the bottom, big, at the top, small.
At the top, I will cut it up.
And I will use my hand to bend like this.
I want to get the curvature.
This edge is 40 cm wide.
I will put it in here.
We put it in the left corner.
This second edge, I will put it lower.
I will use this golden leaf edge.
I will cut off a little bit of the green tendon.
I just cut a little bit.
Let me fold this leaf.
I put it on the left side.
I will put a curve on top.
And a curve at the bottom.
I will put a shorter leaf in the middle.
I will take this golden leaf and put it in the front.
In the front, I just hold it short.
I shouldn't hold it long.
If I hold it too long, it will cover this part.
It will not be beautiful.
Here is this leaf edge.
It is only about 14 cm.
I will hold it, I will hold it in this main point.
With this edge, I will make it a little bit longer.
I will hold it at the back.
At the top, I will also put it in.
I will use a basic leaf pattern.
I will not make it fancy.
I will calculate a straight point in the middle.
I will put a straight point.
For the other points, I will hold it at the back.
Then our leaf will be even and beautiful.
If I hold it too long, it will get monotonous.
I'm going to do the same thing on the other side.
It's also quite easy, so it's not difficult.
When we get the method of leaving and how to go, our way of leaving becomes much easier.
I'm done and now I'm going to go to the bottom.
For the bottom part, I will go in the form of a fan.
And I will reduce it a little bit.
For the fan part, we note that we hold one straight here.
We hold it straight here.
And from the next ones, we will bend the legs like this.
We bend the legs a little bit.
So that the bottom will show, it will reveal this yellow part.
We don't have to bend too much.
We try to make it horizontal.
And now I'm going to sit down and cut it.
I will cut from here.
And for this part, I cut below.
I should choose a slightly curved line.
Then we start to hit the hand to this side.
We choose like this.
We will choose above to have a curved line.
This part is not curved yet, so we will cut more.
We will fix this part.
And we will use the pin to press again.
For this part, I will also use a leaf.
And I hold it up like this.
I hold it up to start the second fan.
I just set it down.
Bend the legs.
I hold it up to start the third fan.
And now I will start to cut.
I also bend from below.
I will bend here.
At the bottom, I always choose a curved line.
At the bottom, it is curved.
Then above, I will choose a slightly curved line.
I choose this part.
I hold my leaf to make it soft.
Now I will use this pin to press again.
When we sew, we should sew for this line.
If it is horizontal, it is horizontal.
Do not sew horizontally, sew horizontally.
And if it is close to the top, it is close to the top.
That is, when we go, if we look at it,
our sewing line will be even and beautiful.
If we pay attention to each small detail,
the overall work will be more beautiful.
After going here,
I will start to bend this out here.
And I will hold this half face here.
I'm a little bit nervous.
And I will use the pin to press again.
Starting from this, I will cut it a little bit.
I just put it in front of it.
And I will hold this side for me to cut.
I cut a curved line down.
Here I have a big chau ba leaf.
And I will cut this chau ba leaf.
I drink a turn down here.
And I cut a curved line up.
I just cut it simple like that.
I really like to hold this chau ba leaf.
Because this chau ba leaf I bite,
I feel it is not as long as the chau ba leaf.
The chau ba leaf is big,
so it bites very quickly.
Many times holding the chau ba leaf is very long.
Here I will bite it to the right side.
Now I will use this chau ba leaf.
For me to put.
Here I put this leaf a little bit long
so it can cover the bottom.
And the root at the bottom.
Here I put it in front of it.
I put it at the back.
And this part I will put it a little bit long.
Here I will put a big leaf
a little bit long at the bottom.
Here I use a flower cup.
I take a flower cup that is open at the bottom.
I will put it in the upper part.
And when you put it in,
remember to bend your hand a little bit.
So when we look at the flower cup,
it will look directly at the flower.
And here I have a button
with a flower that is a little bit open
but it is smaller than this flower.
I will put the chau ba leaf in the lower part.
I put it down like this.
At the bottom, I will put a flower in here.
And I will also put the flower cup
fly chau ba leaf here.
I put it opposite to the other side.
And I will choose a smaller flower.
I put it here.
I will choose a bigger flower.
About the cup, I just go lightly like that.
That is, I put these two cups in opposite directions.
And now I will add pink to make a letter S
around this part.
So I will put the highest flower up here.
Then with the next flowers,
I will bend my hand
and it will be lower than the top flower.
These flowers are shorter.
I hug around here.
This is the top ring.
I will make it a loop like this.
Now I will connect the bottom layer
to stick in here.
I will continue with the bottom flower.
Let it stick to the second flower.
Then I will start to go lower.
Here I will add a pink flower.
I add it to make it a little curved like a hat.
And now I will finish my leaf.
Wherever it is empty, I will put it there.
These upper parts are still very white.
I will make it shorter.
The inner layer is always shorter.
I will make it a little thinner.
Wherever it is empty, I will put it there.
And so I have shared with you
how to stick the two-layer flower bouquet
in pink and white like this.
Actually, it is also difficult to stick
the two-layer flower bouquet.
It is difficult because we have to know
how to combine the two layers.
But there must be a connection
between the two layers.
And while we stick the flowers,
we should not mix too many colors.
Mixing too many colors will make our bouquet
more confusing.
If we want to make the bouquet
even and beautiful,
we should leave a little green
to make it look like a yellow leaf.
And when we drink it,
we should cut the bottom part
so that it has a curved shape like this.
And now I will end the video here.
See you again in the next video.
