Homemade image candy (cut rock candy) | No special equipment or ingredients needed

Street Food
4 followers
8 Video ViewsยทApr 29, 2025
If you're looking to buy some candy online instead of making it, I recommend Candylabs in Montreal:
Image candy, or cut rock candy. Hard candies with little designs in their cross sections.
I believe I've designed a good procedure for making these at home, with no special candy
shop equipment, no special ingredients, and no assistant helping you out. Getting a good design?
As you can see, I am so not there yet, but I figured I'd show you the method and maybe you
can do better than me. Mostly, I've just watched thousands of videos from candy shops in East Asia
where these things have apparently gotten crazy popular, and I just wanted to have the experience
of doing it myself, just for fun. For flavor, I'm gonna juice a couple lemons and a few limes.
The professionals use flavor extracts combined with pure powdered citric or malic acid for
tartness. Not everybody can buy that at the store, but you can probably get lemons and or limes.
One cup of juice, 287 ml. Could you use something like orange instead? I think you would find the
was not acidic enough. You would need to add pure citric acid crystals to balance the sugar,
and you can buy them on the Internet. Strain that into a pan. Bits of pulp would create
structural weak points in the candy. Into a wide pan, because the idea here is to evaporate
excess water out of the juice as quickly as possible at the lowest temperature possible.
If you boil this hard, the flavor would come out super cooked and kinda gross.
If you just barely simmer it nice and slow, you'll retain that fresh fruit flavor.
I'm gonna turn the heat off now, because by the time I actually use this,
it will have reduced down even more to a syrup. If you over-reduce it,
you might have to add a little water back in just to get it dissolved off the pan surface.
Time for the candy. A tall, small pot, into which I will put three cups of granulated sugar,
600 grams. At most, a cup of water. It doesn't have to be precise because we're gonna boil it
all out again. We just need enough to get the dissolution process started.
And then I'ma do about a cup or half a bottle of light corn syrup, maybe 300 grams.
Any so-called invert syrup should work, and the quantity does not have to be precise.
I know many of the pros just use straight granulated sugar and water.
If you do that, you run the risk of your hot syrup seizing, which is this rapid recrystallization
reaction that turns your syrup into a solid hot rock in a matter of seconds. It happened to me
twice while developing this recipe. Follow me on Instagram for more catastrophic failures.
This is why I started adding the invert syrup, which inhibits crystallization.
I'm also putting the lid on for the first phase of cooking. This causes steam to condense on
top and run back down the sides, dissolving any seed crystals that may form on the rim.
That might not be necessary with the corn syrup in there, but I don't feel like taking chances.
We're on high heat, and the goal is to boil almost all the water out, at which point the
temperature will be around 310 F, 154 C โ the hard crack stage. Make sure the thermometer is
not touching the bottom of the pan or you'll get a false reading. As soon as I'm in the
neighborhood of 310 F, I will take this off the heat. The pros would then pour this out onto a
special cooling table. You can get a similar effect at home by pouring it onto a lightly
greased baking sheet with a tall lip on it, but I've found that it's much easier and cleaner at
home to simply cool this down in the pot. It'll take a while, but we're not doing this in a
commercial context where we need to maximize productivity. We're doing this for fun. And
it's also good to move slowly when you are working with hot syrup at home. This would burn you
horrifically if it got on your skin right now. As it cools, you'll have to start scraping it off the
sides of the pot. It'll solidify along the sides. Just bring that stuff into the center where it
will melt again. When it's cooled to the point where I can just barely stir it anymore, I will
stir in my citrus reduction. If you were to stir this in while the syrup was still ultra-hot,
you would destroy those fresh fruit flavors that we worked so hard to preserve. So you stir it in
at the last minute. You can already see we're starting to work some air into that syrup,
which is what we're going to do next. We've got to get this candy as puffy and fluffy as
my mattress from the sponsor of this video, Helix Sleep. Let's thank them.
Helix is a premium mattress in a box. You don't need a truck to move it. They ship it right to
your door, free within the U.S. Break the seal and it blows up like a balloon. I've had this one
since last spring, though I just got a Helix bed frame to go with it. Like all Helix products,
it's great value for your money. It shipped to my door and it was a snap to set up.
That mattress is the Helix Dusk. How did I know which one to get? I took their quiz online. I
told them how Lauren and I like to sleep โ side or stomach, firm or soft. We do not agree on
these things, so Helix recommended the perfect compromise, which is a real foam and spring
mattress. Don't be thrown by the fact that it came in a box. It's not some glorified air mattress.
It's real. And I sleep way better on this thing than on the old-fashioned mattress that we used
to have from a furniture store. They give you a 100-night trial. If it's not the right match for
you, they'll come and take it back. Use my link in the description to save up to $200 on your
HelixSleep mattress. Plus you get two free pillows. That's helixsleep.com slash ragusea.
Thank you, Helix.
OK, when the syrup has cooled to the point where you're not gonna be able to scrape it
all out of the pot, that's the temperature we're looking for. I'm just scraping whatever I can get
out onto my stone countertop. As soon as it's down, I'll push it around to make sure it doesn't
stick to my counter, which it definitely will do if it's too hot. You could pour it onto a
ceramic plate to be safe, especially if your countertop is not heat-safe. Use a plate you
don't care about if it cracks, but it's certainly easier to work the candy right on the counter if
you can. It is still way too hot to touch for any length of time. I'm just touching it for an
instant so I can get it folded over on itself. The part that was touching the counter is now
too firm and it needs to move back to the center where it can re-liquify. You gotta work constantly
to keep the whole mass in thermal equilibrium. And it's time now to pull the candy. Stretch it
out, fold it over on itself, repeat. You'll note that I'm pulling it quickly and then throwing it
down on the counter, picking it up quickly before it sticks to the counter, stretching it out and
throwing it back down again before it burns me. I can only touch it for a second at a time.
Those are just normal, food-grade latex gloves from the grocery store that I'm wearing. They
give hardly any protection from heat. But if you ended up with hot syrup stuck to you,
you could at least tear the gloves off. I am used to working with very hot things with my bare hands
and I have an intuitive sense of how long I can touch these things before they injure me.
If you are not similarly experienced, I don't think you should make this candy,
though there are heat-resistant candy-making gloves that you can buy online.
The goal of pulling the syrup is to work microscopic air bubbles into the structure
of the candy as it cools and solidifies. If you don't work in the air, hard candy is
inedibly hard. You just have to suck on it to dissolve it. If you stretch it until it is puffy,
you get a structure that you can crunch through very easily once cooled.
As you can see, it's looking kind of satiny and white. That means we've got plenty of air
in there. The pros mix in their coloring before they do the stretching. I have found that when
working at home by myself, it's easier to stretch the whole batch at once, break it down, and then
add my colors chunk by chunk. How? By keeping the candy soft in the microwave. The pros have
assistants who roll the candy around on giant heat tables that maintain the perfect temperature
for keeping the candy workable. My home gas stovetop is too hot. It just melts the candy,
even on the lowest heat. You can keep it workable by microwaving it, literally two
or three seconds at a time, flipping it, giving it another two or three seconds.
The heat will build mostly at the center of the lump. I suspect this is because the outer layer
dries out and microwaves work chiefly by exciting water molecules in food. So you have to pull it
out, fold it over on itself, bring the firmer exterior into the looser interior to achieve
thermal equilibrium. Once it equilibrates and it's a nice workable consistency, I will fold
in the food coloring. For my method, it must be the gel-style food coloring. The thin, liquidy
food colorings would just spill out onto the floor. I'm stretching and twisting the candy
all over again to get that color worked through. Once it gets too hard, I'll just microwave it
again, two or three seconds at a time, flip, nuke again, two or three seconds. If you overheat it in
the microwave, it'll melt onto the floor. You'll never get it off, but you'll burn yourself trying.
Heat it a few seconds at a time, work the color through, and this is why I'm wearing the gloves.
I can just pull them off when I'm done, and now I can handle my white lump without color-polluting
it. I'm trying to keep that lump warm too, so I'll give that a little bit more time in the
microwave as I get my green lump back to a workable temperature. Don't forget to flip it
constantly or it will melt onto the microwave floor. I'm gonna try to do a citrus slice design
today, so I'm working this into a green triangular log. This will be the sections of the lime slice.
For the membrane surrounding the sections, I'm gonna cut off a small chunk of white
and get that back to a workable temperature. The pros use an actual white food coloring,
like titanium oxide. I've never seen that for sale at the grocery store.
This is white enough, and I'll wrap it around two sides of my triangle.
Heat that back up, two or three seconds per side, and I'll snip it into six sections. I
obviously could have gotten this hotter, but you wanna be conservative. If you melt the interior
of the candy, that will collapse all the air bubbles that we worked in there and the candy
will be too hard to crunch. There. I think that should look kinda like a lime slice once cut,
right? Maybe? Heat that up again, roll it out into a log. If you want an outer coating to
wrap around the whole design, you need to leave yourself at least a third of your candy mass for
that purpose. This I'm going to heat up again, fold to equilibrate the temperature, and then
work in some yellow food coloring to go with my lemon-lime flavoring. Stretch, pull, twist, etc.
And now I can work this into a sheet big enough to wrap around my lime log.
Heat that up again, a few seconds at a time, to the point where I can stretch this out.
Again, the pros do this on their giant heat tables, and they have assistants to help them
roll it out. I'm just doing it myself, one small section at a time, using a combination of
stretching and rolling. I am still having major problems with warping the image at this stage,
so please do not take my advice as expert. Maybe you really do need a second pair of
hands for this. But anyway, you can have some waste at the tips of your logs. Even the pros
have that problem. Just get whatever you can. Roll it as thin as possible. The thinner the logs are,
the cleaner they cut. And I think the sink is the perfect place to cut them at home. Just put some
kind of bin down there to catch the candy. And up here you have a precipice over which you can
suspend your little candy canes and guillotine them. I obviously have not mastered the touch
of this yet either, though again, I think the main problem is that I did not roll these quite
thin enough. And my design is a complete disaster inside. It's pure mush. I have done much better
on earlier batches. All kinds of shards are gonna fly everywhere as you're cutting, but
because I'm doing this in the sink, it doesn't matter. Similarly, when it's time to clean this
pot, just fill up the sink with water and leave it overnight. The sugar will dissolve all by
itself. You just rinse it off in the morning. So yeah, that batch was kind of a disaster,
design-wise. I did much better on previous attempts, but that's my method. See what you
can do with it. Does it work as well as the big heating and cooling tables that the pros use?
Absolutely not. And if all you want is candy, just buy it on the internet. I have a link to
my favorite shop in the description. But if what you want is the fun experience of manipulating
sugar lava yourself at home, then have at it. Again, be very careful. Proceed at your own risk.
