How to make automatic water fountain without electricity

Terrific Physics
40 followers
Hello everyone! In this video I'm going to show you how to extract pure neodymium
from neodymium magnets and what surprising things I encountered while
doing that. Let us start off with a little bit of history. I think in one way
or another most of us encounter neodymium magnets in life, whether that be when we
buy magnets for our refrigerators or when we use computer hard disk drives
which also use neodymium magnets. Nowadays this type of magnets is being
used more and more in lots of branches of science and technology thanks to
their high efficiency. However, this hasn't always been the case. First magnets
has been created even before first people were, because even iron ore, which
is called magnetite, has magnetic properties. Such natural and quite weak
magnets were used even by the ancient Egyptians. However, it became common to
use magnets less than 50 years ago when people started using cheap samarium
cobalt magnets and later on even cheaper ferrite magnets. Later in the 90s of the
20th century, scientists both in Japan and the USA invented a new type of
magnet which is an alloy of rare-earth metal called neodymium, iron and boron.
Adding neodymium helps to significantly increase efficiency of this material's
magnetic properties. At the dawn of their discovery back in 1982, this material was
made of powder consisting of neodymium, boron and iron, which were baked together.
At the same time, such magnets were several times more effective than
ferrite magnets, but they had one major flaw, which is a low Curie point. This
means that their magnetic properties quickly weaken as the temperature
increases up to 70 degrees Celsius, which is why they could not be used in some
spheres. However, science has advanced since then, and modern neodymium magnets
contain certain additives which make such magnets withstand heat above 200
degrees Celsius. They even have special symbols on them showing their magnetic
force and Curie point. To see what modern neodymium magnets consist of and extract
neodymium from them, I purchased such a magnet from a Chinese manufacturer. For
my experiments, today this country is a leader in the production of such magnets,
because China has monopolized the market of rare earth metals, one of which is
neodymium. First, I need to dissolve this small magnet in nitric acid. To speed up
the process, I decided to smash the magnet with a hammer. Don't be fooled by
the look of this magnet, which seems to be as hard as iron. After a couple of
blows with a hammer, such a magnet easily fragments into pieces, because it
consists of a fragile alloy, which is also easily oxidized in the air. To
prevent corrosion, neodymium magnets are coated in a layer of copper and nickel,
which is why they appear to be hard. Then, I decided to dissolve such a broken
magnet in nitric acid, which is why I dropped it into 100 milliliters of
concentrated nitric acid. Right away, there started a reaction, producing a lot
of orange and highly toxic nitrogen dioxide gas. Here, the magnet's main
components, which are iron and neodymium, have oxidized into nitrates, and boron
leftovers produced a small amount of boric acid, which can dissolve in such a
liquid. The magnet's nickel coating dissolved in the acid, but it was really thin,
which is why I can just neglect it. To finish the reaction, I left the flask
overnight under the extractor fan. On the next day, the whole magnet completely
dissolved, leaving a muddy solution with sediment. The content of the flask is a
mixture of iron and neodymium nitrate and leftovers of boron. I need to dissolve
them all. First, I add some water to the flask in order for the sediment to
slightly dissolve, and in order to make it easier to work with the solution. Then,
I needed to remove iron salts and somehow extract neodymium salts. To do
that, I decided to employ the so-called oxalic method. I prepared concentrated
oxalic acid solution in another beaker. To run the experiment, I poured some of
this solution into a plastic test tube. After that, I added a few drops of the
solution from the flask. There formed a sediment in the plastic test tube. This
is a good sign. After that, I let the solution sit for a couple of hours. Two
hours later, we can easily distinguish between the neodymium oxalate sediment
and the green solution, which is an oxalic complex of three valent iron. Thus,
when an excess amount of oxalic acid is added to such a magnet solution, iron and
rare earth metals can be divided. Their oxalates are insoluble in water and form
sediment. What matters is to make sure there is no two valent iron in solution,
which also forms an insoluble oxalate. To prevent that from happening, I added some
hydrogen peroxide to the magnet solution. I also saw black sediment consisting of
amorphous boron particles, which didn't dissolve in the acid. To extract all neodymium
from the solution, I used two liters of oxalic acid. After that, I left the
solution overnight in order for as many neodymium compounds as possible to sink
to the bottom. After running decantation of the solution and rinsing of the
sediment, I began to realize that there were some other rare earth metals besides
neodymium. The thing is, pure neodymium oxalate, as well as its oxide, are of
pinkish and violet-ish colors, which, depending on lighting, can change color.
When lit up by a luminescent lamp, it appears to be pink, and when lit up by
LED lamp, it appears to be greenish. My sediment in the beaker was grayish. That
is why to get to know for sure if there were any impurities, first I dried up the
powder, and then I decided to heat it up to 500 degrees Celsius. At such a
temperature, oxalates of rare earth metals decay, and we can identify
compounds formed, judging by other colors. This mixture started to glow brown, and
when it was exposed to the reducing burner flame, started to get more pale
again. Apparently, there was some other rare earth metal in the neodymium oxalate,
compounds of which are of dark color. Fortunately, there are not that many
options, and I immediately suspected that it was praseodymium. In contrast to pale
oxides of other rare earth metals, praseodymium oxide is compound of black
color. Besides, it has mixed oxidation states like iron ore. Okay, I get it with
praseodymium, but what about other impurities? Is there neodymium at all?
Forget to know that I dissolved some of the obtained brown powder in nitric acid.
I got such a greenish solution, and that's because of praseodymium impurities,
compounds of which are of bright green color. However, if we change lighting from
LED to luminescent, the color of the solution will change, which means there
are neodymium compounds in the solution. If we shine with a different light
sources on the test tube with a solution of pure neodymium chloride, we can
observe the same effect. Also, I decided to see how many leftovers iron compounds
I have in the solution, which is why I ran a qualitative iron reaction. For
comparison, first I added a drop of 10% iron chloride solution into a 1%
yellow potassium ferrocyanide, which identifies iron in the tested solution,
forming blue sediment of Prussian blue. Now I'm adding a drop of the tested
solution to 2% potassium ferrocyanide solution. The reaction did not start
immediately, and the color isn't very saturated, which means there is not that
much iron in the obtained oxide. Unfortunately, impurities of other rare
earth metals can be white and can only be detected with a chromatograph and by
employing special techniques we don't have at our university. That is why it is
not likely that I will be able to identify all impurities in this brown
solution. Another problem is that chemical separation of one rare earth
metal from another is a very difficult thing to do because of the very similar
chemical properties of these elements. It is done with the help of special iron
exchangers and is very costly. That is why Chinese manufacturers usually don't
bother to completely separate neodymium from praseodymium. Adding 2%
terbium and dysprosium to the mixture compensates for that. These additives
raise the working temperature of the obtained magnets. In the end, I tried to
reduce the obtained mixture of neodymium and praseodymium oxides with a metallic
lithium. To do that, I made such a crucible from niodium foil and attached
it to the retort stand. After that, I mixed the obtained oxide with pieces of
lithium and added 40% of table salt in order to boost separation of metal from
the lithium oxide. When the reaction ended, I dissolved the obtained lump in
water in order for the remaining lithium to react with water. At the end of the day,
I confirmed that these chemical reactions are very complex because I
got a ridiculously small amount of the metal. The rest either burned down or
didn't react at all. At factories, rare earth metals are obtained from fluorides
through electrolysis with the help of special devices. So, I think now you
really understood that neodymium magnets are not made only from neodymium iron
and boron. And if you liked this video, don't forget to give it a thumbs up and
subscribe to my channel to see many more new and interesting.
