Coffee Extraction - Connecting a Pierro Coffee Machine to mains water or a Portable water tank

KoffeeOne
96 followers
1 Video View·Apr 18, 2025
How to connect a Pierro Coffee Machine to a Portable Water tank
http://www.koffeeone.com.au/Espresso_Coffee_Machine_Pierro_Silver_Range/
hi my name is peter walker
i'm the ceo of pierro coffee machines
www.pierocoffeemachines.com
welcome back to our video demonstrations
on the piero today i'm going to show you
how you connect up your pro2 group to a
mains water connection feed or a
portable
tank if you're hiring a machine for a
weekend or for a functional for a
wedding okay
the first method is if you're going into
mains water
you will have a water kit
like such
that pressure limiting valve goes onto
your mains water tap
of course your filter will be hanging
off the bottom there
you place your main water feed into this
john gaspini so it's as simple as just
push it straight into where it says
outlet
if you need to remove this after you
dismantle your machine or you're
finished for the day you need to let the
water pressure off so you take your
your fuel off the bottom it's as simple
as you push it in and then you hold the
grey connection on the john guest fini
and the hose will come straight out so
i'll show that again so once it's in
you're pushing pull out so it's now
connected you push the white hose
towards the fitting hold the grey
connection and you'll just pull straight
out
once
you've connected the motor of course you
turn your main water on it'll start to
feed the water through the machine the
second method is you're using a water
jerry can so it's the same thing you
take your water lead and you push into
this tap here same thing you just push
straight in and pull out so it's
connected
once you're connected you can then turn
this tap here to allow the water feed to
run through the machine
the machine takes
12 liters of water to fill so if you're
using a jerrycan which is 20 litres when
you first turn on it'll be empty once
you've picked up from the high firm
it'll drain most of the water from the
jerry can first go
so once you connect up the main tour of
the drum the next step is to turn it on
you must fill the machine in the number
one setting only
so you turn to number one
you'll immediately see the blue lights
here flashing and you'll start to hear
the pump kick in
which is doing now is now going to
extract the water into the boiler
if your machine is dead empty for this
demonstration we've got about 10 liters
of eight liters in the boiler if the
boil is completely empty it may not
completely fill the boiler in the first
go if that happens what will happen you
hear the pump disconnect and you'll see
all these lights will be blue
what that will mean is the boiler it's
not quite full if that did happen you
turn the machine back to zero and then
back to one again
we'll see that it'll come off anymore
now because we've already
pre-pre-filled the boiler anyway for the
demonstration
as you can see now the pump is cut off
the lights are off so that means your
boiler is full you can now turn the
machine to number two
and it'll start to heat for you and
it'll heat up the temperature once it
gets up to your desired temperature here
which is normally 0.9 or 1 bar depending
what you've you've had the machine set
for you're ready you'll be understanding
new extractions
that's as simple as this so remember
just recap there's two methods range
water you have a connection kit like so
which goes to the mains water tap
through your filtration to your
connection hose form a drum straight
into the hose
remember to disconnect disconnect your
hoses quite simple tap off
push the white hose hold the fitting
pull the connection away
thank you very much hope the
demonstration showing how to hook up
your machine to your mains water
has been helpful my name is peter walker
i'm the ceo of pierre cough machines www
dot pierre coffee machines thank you
