Initial Installation of the Talento Automatic Coffee Machine

KoffeeOne
96 followers
1 Video View·Apr 18, 2025
Initial Installation of the Talento Automatic Coffee Machine
http://www.koffeeone.com.au/coffee-machines/
first time installation weights and
dimensions talento has no curved sides
or parts so that it can fit anywhere
easily even where space is lacking or
alongside other
equipment this super automatic is 840 mm
High 400 wide and 600
deep its net weight is 65
kilos power power depends on the
selected
settings you can choose to heat the
coffee boiler tank and steam in
sequential or parallel
modes with the first option the machine
needs a lower power input 3,000 watt but
it takes more time to heat
up when using the parallel option
talento needs 5,600 WS power to heat up
but it then needs a minimum time to get
back up to temperature especially when
making long beverages all of the
technical characteristics are stated on
the rating Plate located under the drip
tray
water supply and drainage the machine
has already connected 3/4 water supply
pipe during the initial installation the
service engineer needs to fit a filter
to the other end of the pipe and connect
this to the water
mains make sure that the inlet pressure
is no more than four bar and if this is
not the case fit a suitable pressure
reducer next prepare the drainage pipe
insert the clamp and insert it into the
relevant fitting under the
machine
tighten the pipe clamp firmly and then
connect the other end to the drainage
Outlet optional direct grounds discharge
the version with direct coffee grounds
discharge has a drawer fitted with a
funnel going to a conveyor that expels
the grounds directly into the
rubbish the service engineer needs to
fit the conveyor funnel into the drawer
and prepare the grounds discharge pipe
with the special
clamp before inserting it into the
relevant fitting under the machine and
tightening the clamp to make sure it's
firmly in
place
