I Made a Paludarium With Flowing Waterfalls, Here's How!

Aquaspace & Terrarium Designs
32 followers
Apr 12, 2025 #Paludarium #Handicraft
Learn how to create a stunning paludarium with a working waterfall in this step-by-step tutorial! This video is packed with tips and tricks to help you craft your own piece of nature indoors. A paludarium combines the beauty of both aquatic and terrestrial elements to create a stunning natural ecosystem, why not try making one yourself:)
#Paludarium #Handicraft
In this video I'll show you how to make a lush nano paludarium with not one but two flowing
waterfalls. Stick around to the end as I'm even going to show you how it evolves from day one
all the way up to day 80. Let's waste no time and get straight into the build.
What I'll be using is this glass tank that I built myself from picture frame glass.
It's got a hinged door and a leveling mat on the bottom. I've shown how to make these tanks
plenty of times before so if you want to learn how check out the video on screen now.
One important feature is this small gap in the top, this will play a key role in the waterfall
working properly. The idea I've got for this build isn't just one waterfall as I think I
want two waterfalls on either side of the paludarium. The first thing that I'm doing is
placing a foam mat inside the tank which is going to help protect the glass from the rocks that are
about to go inside. The stones I've selected for this build are known as geo rocks and they're one
of my favorites due to their detailed texture. To add to the hardscape even further I'm going to
use a few pieces of bog wood as well. I'm starting by placing in some geo rocks to try and create a
base that the wood can then go on top of. Despite having a picture in my head it still takes a whole
lot of trial and error to try and make it come to life. After a short while I think I've achieved
something that I like. The left and right piece of wood are going to be where the waterfalls flow down.
A few more small pieces of rock will help fill in the gaps around the base and add a bit more detail.
As is the hardscape is very unstable so I'm going to need to lock it down.
As you might have guessed the easiest and most reliable way of doing this is with the super glue
and tissue method. I'm taking a small piece of tissue and wedging it between the wood and rock
and then soaking it with some liquid type super glue. It dries really fast and forms a strong and
safe bond. With the hardscape nice and solid it's time to move on to the next step. Instead of
placing a pump inside the tank which would certainly be hard to fit and even harder to clean
I'm going to use an external canister filter. I built this filter myself and I do have a tutorial
on the channel showing you exactly how to make one. I'm going to use these long plastic straws
as intake and output pipes inside the paludarium. They both fit perfectly inside the gap that I left
in the lid. To start off I'm going to create the intake as I think it's going to be the easiest.
I'm using a sharp blade to cut a notch out the bottom which will allow it to pull up water.
It's certainly not the neatest but it should work just fine.
I'll definitely place in some filter foam around it just to make sure it doesn't get clogged up.
As for the top I think it's going to work much better at a 90 degree angle instead of coming
straight out. I'm using some electrical tape to block up one end of the straw. Now I'm going to
flip it round and fill the straw up with some fine sand. A small funnel makes this task much easier.
Now that the straw's filled up I'm going to cover the other end with some more tape to lock it all
inside. This is a jig that I'm going to use to bend the straw to the correct angle. To bend it
it needs to be heated up and a lighter is a simple and easy way to do this. I'm doing my best to heat
it up very gradually and evenly as you don't want the flame to burn the plastic. Now that it's nice
and soft I'm going to go ahead and bend it at a 90 degree angle. After holding it in place for
about 20 seconds it's cooled down enough to stay in place. The reason I filled the straw up with
sand is because it stops it from collapsing in on itself when bending it. With the tape and sand
removed I can place it inside and as you can see it fits in perfectly. Now it's time to work on the
output pipe which is going to be slightly more complicated especially as I want two waterfalls.
Using the exact same methods that I just showed you I've gone ahead and created all the parts
that I think I need. The hole in this straw was created by heating up a screwdriver and simply
melting it through. As for attaching these pieces together I'm going to use these small pieces of
silicone tubing. It's all quite fiddly to install but I've tried to create them in a way that makes
them completely invisible once the tank is complete. This is the output for the waterfall
on the left and this small one is the output for the waterfall on the right. I'm expecting the flow
on the left to be significantly weaker than the right as it's got a lot more distance to travel
but hopefully it'll make its way out. The only things that need to be attached with glue is the
output on the right that goes into the hole in the center of the straw and then pinning the output on
the left behind the driftwood. I'm really happy with how discreet the pipework is and once the
plants are in I think it's going to be almost invisible. Before moving on I want to set up the
filter and give the waterfalls a quick test run. I'm using some silicone tubing to attach the filter
to the input and output pipes. Now I'm priming the filter by simply filling it up with some water.
This is important to do as it won't run if you don't do this.
As expected the left side is significantly weaker than the right but after some time it did start
to even out. It's great to see the filter working just as I planned and it's super quiet which is
always a plus. Later on I'll place things in like moss and plants around the outputs to help the
water flow down over the wood a bit more naturally. Now that I know the waterfalls are working as they
should let's move on with the build. I'm going to use this sharp blade to cut out the excess foam
at the base of the tank. Next I'm going to place in some filter foam around the intake pipe.
This will prevent large objects from being sucked up by the pump which could potentially block it.
I'm also going to use the foam to fill in these gaps in the hardscape. I'm going to be pouring
substrate behind the hardscape soon and if I leave these gaps open it's simply going to spill into
the foreground. For this paludarium I'm going to try something really simple for the substrate.
This is some fine liqueur and it's all I'm going to use for the substrate layer.
I've never used it as a standalone substrate before so I'm really curious to see how it gets on.
If it does end up working out it's going to be a massive win as this stuff is really quite cheap
in comparison to aqua soil which is what I'll usually use. I'll probably add some more later
to cover up the pipe work but for now I'm going to start working on the foreground.
I'm starting with just a layer of fine sand. Although it looks better it certainly doesn't
look too natural so let's fix that by giving it some contrast and detail. I'm starting with
some fine gravel and pouring it pretty much everywhere. Next I'm going to do the same with
some small pea gravel but add slightly less. Finally I'll add some larger pea gravel followed
by a light dusting of sand to finish it off. Just by adding a bit more variety in stones and
gravel you can see how much more natural it looks. Before I can add any plants I need to do a couple
things. I'm giving the paludarium a really good spray down and then I'm going to install a black
background on the back panel of glass. I think this will help frame in the scape much better
as you simply won't be able to see what's behind it. To create a background on a budget you can
simply tape on a black piece of paper. Now I think it's about time to start bringing the paludarium
to life with some plants. The first plant going in is trident fern. I'm mainly going to plant it
around the inside and outside of the wood to help hide all the pipe work. This along with all the
other plants I'll be using are sold as aquatic plants but they grow great inside paludariums
due to the high humidity. I'm already loving how it looks and it's only going to get better
and better as I've got plenty more plants to come. Next I'm going to plant in some anubias
and bucephalandra. I think the small delicate leaves of these plants are going to add some
nice detail to the paludarium. I can plant the majority of them by wedging them inside gaps and
cracks but for the ones that I can't I'm using a small amount of gel type super glue. These types
of plants are prone to drying out so keeping them damp really is essential. The next plant to go in
is this crypt. I'm going to plant it into the leaker right in the center. This plant is quite
demanding of nutrients so it's going to be interesting to see how it gets on with no real
substrate. To fill in more of the background I'm going to plant in some hygrophila. I absolutely
love the unique detail in this plant's leaves and I think it adds a natural look to whatever
scape it goes in. I've still got a few plants to add but before doing so I'm going to fill the
tank up with water. Just like always I'm placing a small piece of paper towel inside the tank to
stop the water disrupting the sand or scape too much. I'm not using any fancy water and it's just
regular tap water that's been dechlorinated. To bring a bit more detail to the water's surface
I'm going to place in some floating plants. I think a couple different species varying in size
and texture always adds a more natural look. Now let's install the filter and get the waterfalls
running before adding any moss. Right at the top of the intake I'm adding a small amount of filter
wool to help polish the water. It's working great but as I said earlier I want the water to flow
down over the wood a bit more naturally. Adding moss is a super easy way to manipulate the flow
of the water. I'm adding small patches of this Christmas moss around the output pipes and as
you can see it drastically changes the flow. Before leaving the paludarium to grow in I'm
going to add some springtails. These tiny bugs will help keep the ecosystem clean and healthy
by eating things like mold and decaying matter. Now all that's left to do is to close the hinged
door and leave the paludarium to grow in and establish. It's been just under three months
since I set this nano paludarium up and I'm glad to say that it's thriving. To my surprise all the
plants are doing unbelievably well. I was half expecting to see some nutrient deficiencies by
now but as you can see that's simply not the case. I definitely need to do a bit more
experimentation with this substrate method as these results are really quite promising.
As for the waterfalls they're both still flowing perfectly and I really love watching these slow
drips over on the left side. Now let's take a look under the water as things are slightly
different than I expected. As I'm sure you can tell the water's got a bit of coloration to it.
The reason for this coloration is simply because the bogwood is slowly leaching tannins into the
water. I could fix it by simply doing more water changes or even adding some carbon to the filter
but to be honest I really like how natural it makes the tank look. Let me know what you think
in the comments. If you look closely you might be able to see some life inhabiting the water.
A couple weeks ago I added a small group of tiny baby cherry shrimp. They're all doing really well
and despite their small size they have grown significantly since I introduced them which I'm
guessing is due to the abundance of food. I doubt I'll keep them in here once they're fully grown
as it might be a bit small but it's going to serve as a great grow out tank. As for the external
filter there's no issues to report whatsoever. It's still working just as it was on day one but
it might need a slight clean soon. Other than general maintenance such as cleaning the glass
I really haven't done too much at all. Believe it or not I've only done two water changes in the
past 80 days. I do think this has played a key role in the success of the paludarium as it's
kept all the parameters nice and stable. I'd love to hear your thoughts on this build in the comments
below and as always thank you for watching. If you enjoyed this video why not check out
this one next as I think you might enjoy it too.
