【愛德美模型】1⁄35 M1A2 Tusk 2 艾布拉姆斯製作(完整版)

坦克博物館
75粉絲
224 次觀看·2025年9月6日
大家好,我是Hobby Headquarters的Sandy
今天我們要開始製作一些現代的武器
今天我們要製作的是M1A2 TUS-2的模型
來自ACADEMY
我要感謝ACADEMY
ACADEMY很友善地提供了一些模型的樣本
用來製作我們的影片
看起來很棒,是100%全新的模型
讓我們開始吧
在開始之前,我想先說一下
這個模型裡面有四個手冊
一開始你可能會覺得
四個手冊裡面有很多部件
但其實不是的
裡面的手冊裡面的圖片很大
能夠顯示出發生了什麼
我給ACADEMY的信心
這個很簡單,很簡單地跟著指令
裡面有很多小部件
但你可以看到圖片的大小
每個部件的位置都很清晰
在我看過這本書之後
有些部件只是為了某些版本
因為這是三個版本的模型
模型的輪胎組裝得很好
ACADEMY在模型裡麪包括了
這些清晰的輪胎
他們清晰的原因是
因為真正的車子
有一個清晰的輪胎
這是讓你能夠看到
每個輪胎的內部液體水平
所以我現在要做的
就是把那些輪胎拆掉
然後我們會把那些輪胎
貼在模型上
然後我們可以把那些輪胎弄髒一點
看起來應該會很不錯
這臺車的輪胎
並不是一個浴缸的輪胎
它是一個單一的輪胎
但它有一些很強的支撐
在中間
其實當你把所有東西都組裝好
輪胎就會貼在一起
所以它會有一個很強的對應
並不是有任何問題
把它們放在一起
現在這裡有三個
不一樣的輪胎
你希望要把它們放在一起
兩個輪胎
只有一點小的差異
所以我建議大家
像你們看到的
就是把懸吊全部放在一起
然後把它們放在一起
然後你必須從車廂後面
向前走
或者輪胎會不停地
貼在一起
所以如果你這樣做
就應該不會有任何問題
我們要使用的
塑料扣輪胎
主要是因為
大部分的輪胎
是藏在後面的
它們很細緻
我從來沒有見過
就是你其實要貼上
一塊普通的塑料
塑料扣輪胎
把它們貼在一起
所以我貼了一點
超級貼紙在這裡
因為塑料扣輪胎
會有一點緊繃
我不希望它們
在後面拉扯
這是一個小建築技巧
當我們前進
在指示中
它會告訴你
先貼上輪胎
然後貼上這些小橫框
雖然這些橫框
這些長的
很容易貼上
但貼上橫框
這個
這個和這個
如果輪胎已經貼上了
所以我建議
你前進時
先貼上橫框
然後貼上輪胎
這樣會更容易貼上
這個後面
貼上很容易
你可能也注意到
我還有一個小漏洞
我沒有預期
這個瓶子會打開
我把它留下來
這就是
你切割的工序
在這個步驟
他們要求你
貼上視覺塊
貼上前面的部分
我會把它們留下來
因為當我們要塗上去
塗上去會更容易
所以我們不會貼上去
我們會把它放在那裡
就像你們看到的
很多時候
我的橫框都會打開
這樣我們就不用擔心
要貼上去
這個也要貼上
前面的螢幕
也要貼上
下一個步驟
是要貼上輪胎
貼上輪胎
或是把輪胎貼上輪胎
通常我不會這樣做
這樣會比較容易
貼上輪胎
但是我注意到
輪胎會比較容易貼上去
當我們貼上輪胎
它會貼上
希望你們可以看到這塊
我會把它中間貼上去
這個小貼紙
我建議你們
在貼上輪胎之前
要把整個邊緣都擦一擦
擦得非常非常順滑
因為它是非常緊扣的
如果你用橡皮擦
把它擦進去
它就有可能
會跳出來
因為我把它擦掉了
所以
你們看到我們
把它擦成這樣
把它擦進去
然後我們應該可以
擦進去
然後用橡皮擦
這套裝備給你三個選擇
做TUSK 1, TUSK 2
或者M1A2 版本2
我選擇做TUSK 2
這套裝備有鐵箱裝備和
這套裝備的鐵箱裝備
你必須先準備
從後面開孔
這套裝備有鐵箱裝備和
在後面的固定到這裏
我先把相機關閉
讓自己能夠更緊密地
把它們固定在一起
我已經把旁邊的裝備都
試一下
它有幾個固定的凳子
試一下
你不需要先使用它
因爲如果使用它
會很難在裝備上
和輪胎細節上
就像我說的,我已經把這兩個都做好了,所以我們就把這兩個放在一塊一塊的組合上,以後再組合
OK,ACADEMY包含了一個三角形的滑鼠桶
所以你會得到很多很好的細節,只有一個很小的數量的清潔
你必須要做在它上,那是當
塑料桶,用泡沫插進去的時候,非常有幫助
它可以很順利地清潔,不需要太多的
用泡沫插進去,這就會直接插進去,然後用一些泡沫插進去
然後再加上一些泡沫,這樣就完成了整個滑鼠桶
然後你讓滑鼠桶乾淨,它就會插進去
這裏,你還要確保插入這條線
然後你可以去,我們會去粘貼這個,一分鐘
你就會可以插進去,然後它就會完全粘貼在一起
我還粘貼了前面的攝像頭板
它們有點扭曲,所以
粘貼起來會有點難,但是你確保
每個角落都有一層粘貼,然後中間有一層滑鼠桶,這樣就很穩固
好,當我們把所有的小部件放在滑鼠桶上面
這裏有很多玻璃板,我們需要放進去,你只需要
看着,看着你做什麼,所以你往前走,會比畫作容易很多
例如,這些,這些,我當時在做一些測試
這些小玻璃板,其實是固定在一起的,它們固定得夠緊
我們可以這樣把它們固定住,然後把它們畫上,然後把它們分開
然後把玻璃板放進去,這樣我們不需要嘗試把裏面的東西遮住
其他部分只需要把玻璃板放進去,我們可以把它們固定住
然後我們就完成了,所以這並不是什麼問題,所以你只需要
看着所有的小東西,例如這些,這些都是固定的
這些都是固定的,這些也是固定的,所以我將開始
把所有的小東西固定在一起,就像我說的,我已經準備好
如果我需要遮住,但是我認爲我們不需要遮住任何這些東西,我們可以把它們固定住,
把它們畫上,然後分開,或者稍後就把玻璃板放進去
好的,還有一件事,我們還不需要把這些固定住,因爲我們還需要
把玻璃板從下面滑進去,所以我們將把它們固定住
如果我們需要把它們固定住,我們可以把它們畫上
我會嘗試給大家看,如何把小包裝固定在一起,這些都是非常細緻的
很多的沙發,因爲攝影機在我正在工作的地方
我將嘗試把它們固定在一起,如果不是,我可能要把它們分開
因爲是這麼細緻的工作,但是廣場訓練做的非常好,把這件事放在一起
這次我還有一點沙發的工作,我只是想要粘貼一些這些碎片
刮減它們一些,以便它們不會伸展太多,所以我們將嘗試在這一刻做
Turret Bustle Rack 這裏
And I was just dry fitting in a minute ago
In fact, it fits so well
Actually clicked in the shape
Almost couldn't get it off
To get glue on it
Also, I'm going to attach this little box first
I think this will be easier putting on now
Rather than waiting till we get that glued in shape
So this is just going to snap basically
Coming out from the top like this
And then just line up the bottom pegs here
And there's the click I was telling you about
And we'll just go ahead and put some glue on that
To make sure it stays that way
And then the side racks
We're just going to pop right into shape right here
Make sure that all stays connected on it
But actually you can see that it lines up
Pretty close to perfect without even gluing it yet
So we'll just do a little messing around with that
And get that to stick well
And now we're going to just put all the last
Of the little armor pieces
And little boxes and things like that
That go on this side
Pretty straightforward
I'm going to get up and tight in there with some glue
Camera's kind of in my way
But you'll get a general idea how it's going to look
So there's the right side of the vehicle all decked out
That little hole is actually going to get a piece of track
But we're going to paint that separately
That's everything but the armored glass
That goes inside of all that stuff
Which I like I told you
We'll be putting in separate later on
So now I'm going to go ahead and complete the other side
Because it's pretty much identical to this one
And we'll move on to some of the next steps
Okay
Principal construction is now complete
A lot of these parts like I told you earlier
Are just snapped into place right now
And they're going to come off as we go to paint it
So I just wanted to give you a
General idea of what the kit looks like
It looks pretty good to me
No problems with putting it together
Everything was pretty straightforward
A lot of little parts
But nothing that I think anyone can't handle
If they're willing to take their time on it
So overall a very very nice kit
Okay first step we're going to do
As usual we're going to spray it with XF-69 NATO black
Over the entire vehicle
Okay I'm taking Tamiya's XF-59
And I added just a little bit of white to it
Just to brighten it a little bit
And now we're going to go over
All of the surfaces of the tank
Okay after I completely painted it
With the dark yellow white mixture
I went over the entire model lightly
But not like a dust coat
But a little bit heavier than
What we normally do at the end
Of just regular XF-57 buff
And hopefully you can see in the video there
That how we're already starting to get
The discoloration and the different paneling
And that from doing our black and white undercoat on it
So it's starting to look really good
So I'm going to go ahead and spray the entire thing
With Lesterler's flat coat
That's going to seal everything in
Then we can go back over it
Start putting the decals on
And doing some of the weathering
And some more highlight painting
Okay what I've gone ahead and done here so far
Is there was only a couple of decals
That I was going to put on this
Like the name
And then some of the numbering on the back right there
Which I put on
And I need to actually clear coat again
To seal them in completely
I've gone over and done some of the
Little bit of minor detail painting
On little areas here and there
Plus after I dull coated the entire thing
I went over some of the highlighted panels
With a little buff
To kind of make them pop out a little bit more
Now the next step we're going to do
Is we're not going to overly weather this vehicle
But I am going to do a slight little black pin wash
On some of the back panels
Plus we're also going to weather up the tracks
And lower road wheels
With a little desert dust
To kind of blend that all in together
So let's start with the tracks next
Okay now we're going to start weathering the tracks
We're going to start off by using the desert dust
As our fixer
And start going along
Kind of heavy
Because I want it to really soak into
All the little nooks and crannies
On the vehicle here
And then using light sienna
As our dusting powder
Kind of put it
Making sure you're getting it all on those areas
And then we're going to come back around
Just a top paper towel
Because we want the pads to be clean
And you can see it starts to just leave
A little film on the pad
Which is kind of nice
Because it does kind of have some
A little dusty dirty effect
So I'm going to
It's kind of hard
Because the camera's in the way here
For me to finish this off
But that's the general idea
That we're going to go with
With the rest of the tracks
So I'm going to go ahead
And weather the rest of the tracks that way
And another thing we're going to do is
Hopefully I can show you this
Is we're going to take our
Our black wash from Vallejo
And we just want to highlight
With a real fine brush
Some of the panels that are on here
Now I did thin this down slightly
Go ahead and let that dry
Now I'm going to do the rest of the vehicle
But I got in real close and tight
So you guys could see that
We're also going to do all the vents
And things like that as well
Okay I've gone ahead and completed
The build up here
First of all we went in
Clear coated all of our decals in
And this is a little
Throwback to Spaceballs the movie
If you guys remember that from the 80s
I went and weathered all the inside of the tracks
As well as the road wheels themselves
Now I did do a little bit of light
Dry brushing on some of these panels
Hopefully you can see it in here
Just to make some of the panels
Pop out a little bit more
And a little more differentiate from each other
We also went and put a little bit of
The soot on the rear pieces on there
We also painted all the taillights
The red color that you need
Just kind of go around in circles here for you
Like I said I didn't want to
Over weather these too much
Because from the pictures I saw on it
Most of the pictures
Yeah they're dusty
But they're not completely beat up
So I wanted to keep it more true to that
Hopefully you can also see the red
That we went and painted the back of all those
Clear red before we popped them in
I was telling you that's why it was another reason
We wanted to leave the
The glass parts out separately
And those were easy to put in
After we were done with all our painting
So there is our completed model
And I want to thank Academy one more time
For providing us with the samples for this video
And thank you very much for watching
And please stay tuned
Because we have more videos coming
