Stig Education (Pratt and Whitney JT8D Engine Breakdown)

Engine in Focus
4 followers
Welcome back everybody, don’t worry we will resume normal videos after this one, I have been on a little bit of a break but I’m trying to keep you entertained with some of these informational videos. This one is on the iconic JT8D engine.
I tried to fill the video with as much pertinent information as possible, obviously it’s impossible to give you every single detail about this engine, but I do try my best.
If you are an expert on this engine or you have worked on it before or have flown aircraft that had this engine equipped please feel free to share your thoughts and your knowledge with the rest of us
As always thank you so much for watching, I appreciate you and I will see you on the next adventure
#machine #engine
Welcome back ladies and gentlemen and today we're going to do an engine breakdown. We haven't done
one of those in quite some time but we're not going to do it on the CFM Leap 1A and we're not
going to be doing it on the CFM 56s. No, we're going back to the classics. The iconic, the one
and only Pratt & Whitney JT8D. This incredible power plant has a very rich history and we gotta
mention it. It was built on the backbone of the Pratt & Whitney J52 but better known as the JT8A.
Used mostly on military aircraft such as this beautiful A6 Intruder as well as used on the
A4 Skyhawk. But as commercial aviation kept on growing, Pratt & Whitney was now tasked with
a new challenge to make a more modern engine to accommodate the new airframes that are coming out
and that's exactly what Pratt & Whitney did. The year was 1964 and Boeing has just come out with
a brand new aircraft. You know it very well, the Boeing 727-100 series. When the aircraft first
took flight it was equipped with the original engine, the JT8D-7. But the evolution of that
engine doesn't stop there. It has eight different types of models. Obviously I cannot talk about
every single one of them but I'll try my best to give you a differentiation between one of the
oldest ones and the newest ones. Not only do you see the evolution within the engine itself but
you can also see what type of aircraft that it got installed on. Matter of fact, the engineers
at Saab liked that engine so much that they commissioned Volvo to build them a modified
version of that engine. They called it the RM8. Basically a heavily modified engine or JT8D
with an afterburner. They installed it on the Saab 37 Vegan. There you go, that thing. Looks like the
Pratt & Whitney engine still wanted to hold on to its military roots. Rightfully so. All right,
let's keep on going. Just like most engines that you see today, the JT8D is an axial flow dual
spool engine. The bypass ratio is obviously smaller than comparison to the modern engines
you see today but over its time of evolution it did grow slightly not only with the bypass ratio
but as well as its length. Thrust performance also grew significantly from its birth. Originally it
usually had between 14,000 to 17,000 pounds of thrust but as the engine evolved to the JT8D-200
series it was capable of putting out about 18,000 to 21,000 pounds of thrust. These variants of
models with extremely high performance were installed usually on the Super 80s and the Super
27. Okay, enough about that. I'm not trying to make this into a Wikipedia page. Let's get into the
internal structure and the workings of this engine. As I mentioned earlier it is an axial flow turbofan
engine and it is a dual spool. Internally we're going to start with the compressor section. The
older variant that you're looking at. So the compressor section on this one only has 13 stage
split compressor. Look at it from front to back. From the front you have a six stage front low
pressure compressor. Moving into the core you have a seven stage rear high pressure compressor. You
move on to the combustion section with nine annular combustion chambers. After that you have a
single stage compressor drive turbine and right after that you have a three stage rear compressor
drive turbine. Both of these shafts are running on seven main bearings and just like with any other
high bypass turbofan or any low bypass turbofan the low pressure turbine runs the low pressure
compressor. The high pressure turbine runs the high pressure compressor. Both on individual shafts.
Jet engine technology has not gotten any different. They all run the same way it's just they're
getting more efficient. Higher bypass ratios, newer more modern materials, more efficiency,
and more longevity. Here's another variant of the JT8D. This time it's equipped on a 737 Jurassic.
Either a 100 or a 200 series right here. You can tell that's an older model engine because it does
not have the hush kit. One thing about this engine is that it's earth shatteringly loud.
Anyone has ever stood next to one of these or worked on them they understand. I have been
fortunate enough to work on the classic 737s, the MD-80s, and the 727s. One common thing between all
three of these aircraft is the mounting points for the engines. There's only three points of contact
and I was surprised myself when I first saw it. There are tiny little bolts and very tiny little
mounting points. But it's engineered well that's how it's made. I'll show it to you later on when
we get onto the engine itself. By the way a huge shout out to George T Baker and to Mr Munoz. Thank
you so much sir. And yeah this is an amazing facility and a great school for A&P. That's for
Airframe and Power Plant. That's the license you need to work on airplanes. But that's a topic for
another day. Here's a nice little shot of the inside of the MD-80. I'm sure it brings back fond
memories to whoever flown this airplane or whoever has maintained it. Back in my day I loved working
on them. It was fun. It's a very simple airplane but yeah it was a great time. Anyway back to the airplane.
As you can see a bunch of steam gauges all analog no digital or I should say very little digital.
These aircraft became evolved into the MD-80s and the MD-90s and the 717s. You saw more digital
interface being introduced into the aircraft avionics systems. Oh one thing I did forget to
mention about the compressor section. Remember I told you that was an older model? Well on the
newer models the dash 200s it has a 14 stage split compressor. That's one of the main differences
between the older models and the later models. Hence why the 200 is a bit longer. Another
advancement was the new low noise mixer. The engine a bit quieter but not that quiet. We used
to call it the cookie cutter. You know for obvious reasons. Here's a quick representation of internals
of an engine. I know this is not a JT8D. This is actually a GE CJ805. But it kind of gives you an
idea of how the internals work and how they spin. Okay let's begin to dissect this thing. So the
first thing you're going to notice is the spinner. But it's actually not a spinner. That big circular
cone that you see is actually called a bullet. To be more specific it's called an inlet bullet.
This is what's known on this engine as the front accessory drive group. Unlike modern engines that
thing actually does not spin. It's a stationary bullet or a fixture. It serves more as an
aerodynamic cover for certain components. One of which is the N1 tachometer. As well as the front
accessory drive cover and the number one bearing oil scavenge pump. This is the older model engine.
Let me show you what it looks like on the new one. This is the one that comes off the MD-80.
You'll still see the tachometer but now you'll notice a probe. A pressure probe. The PT2. You're
going to see it on the older model but it's going to be right next to the guide vanes down at the
bottom. Along with the temperature probe. Don't worry I'll point it out to you. Like I told you
guys these engines were evolving so fast and they were changing a lot of things on it. So
bear with me when I keep trying to bounce back and forth between the two variations
or multiple variations. Let's walk around to the left side of this engine and let's take a look at
that component right there. That component is called the fuel oil cooler. When an aircraft is
flying, fuel is cold, oil is hot. Why don't we bring them together to help each other out? Without
intermixing obviously. It's the old school version of a FCOC fuel cooled oil cooler. Right below it
is the fuel flow transmitter and the big thing underneath it is the oil tank. Don't worry we're
going to get back to the oil tank but let's focus on this. Take a look at this valve right here.
This is the starter shutoff valve. It works very similar to any other starter valve. Lead air source
either from the APU or ground cart will be pushed through the ducting and through the pylon and to
the engine to that starter valve. That starter valve will open up and allow air to go into the
starter. The starter will begin to turn. In turn will begin to turn the gearbox. The gearbox will
turn the engine. The sequence of events takes over of intake, compression, spark, fuel, combustion,
exhaust. Now you have a continuous burn and there's your propulsion. All right moving on.
Up next let's take a look at some ducting. Those pipes right there. This is part of your bleed
system. Front to back, 6th, 8th, 13th stage bleed. When you combine all these three things together
they become the compressor control bleed air system. They tap off certain portions of the
compressor and a diffuser to help the engine during startup and running. Basically prevents any
kind of surging of the engine. Also assists in cooling of the internal components of the engine.
On top of that this is where you get your bleed air for the aircraft as well as anti-ice system.
Since the power plant was constantly evolving and there were so many variations of them, you might not
see this type of configuration on a different engine. Some earlier varieties of the JTAD engines
do not even have the 8th stage bleed valves. Moving on to the business end of this engine.
Let's take a look at this. The blades you're seeing are the final stages of that turbine section.
Those inward pointing spikes are EGT, exhaust gas temperature probes. Leads me to talk about
how this engine actually rated its power. You see the aircraft and the engine was developed back in
the 60s. Very early stages of FADEC and EEC. So this airplane didn't have it. All the data had to be
gathered in a very much analog style. Pratt & Whitney engines are very well known for rating
their engines per EPR, engine pressure ratio. In order to get engine pressure ratio you need to
gather data from all points of the engine. Variety of pressure sensors and temperature sensors
scattered all across the engine. Everything from inlet and exhaust temperature, inlet and exhaust
pressure, RPM of N1 and N2. Those are the respective shafts. And all this data being sent up to the
flight deck to the pilots. Hence why you see all the steam gauges that you see. Because you had to
have a reading for pretty much every single thing on that engine. Back when you actually had to
monitor every single thing on that airplane. Now it's all computerized. When we move over and take
a look at the fuel control unit, it'll give you a real good perspective of how mechanical these
engines were. Moving to the front of the engine we're going to take a look at some of these valves.
The one closest to you is the engine anti-ice shutoff valve. And the two in the middle are the
anti-ice thermostatic air regulator valves. The purpose is to prevent any kind of icing formation
on the compressor inlet guide vanes, the inlet bullet and the nose cowling. The leading edge of
it. Eighth stage bleed air is being sourced to the bullet for the anti-icing. And the nose cowling is
getting its hot air from the 13th stage compressor. Near those big pipes we talked about earlier.
Let's move on down a little bit. Let's take a look at the oil tank. This one's pretty simple. It's a
basic oil tank just like any other jet engine. Purpose is to supply lubrication to the main
engine bearings and the accessory drives. Some were equipped with side gauges but the rule of
thumb is fill to spill. Especially on these engines. And if you're wondering what's the
capacity of these tanks. Well total usable engine oil is about 4.0 gallons, US gallons or 15 liters
or so. But you have to remember that when oil gets hot, oil expands. So the total capacity of the
actual tank is about 5.5 US gallons. You got about 1.5 gallons of expansion space. Now let's move on
to something really interesting and very old school. The generator. Now most of you are very
familiar with modern day aircraft generators. They're called IDGs. Integrated Drive Generators.
Well back then they didn't have that technology. Or just wasn't fully developed yet. Back then they
had to split it up into two separate units. Up front the black unit. That is called a CSD. A
Constant Speed Drive. The lighter unit attached to the aft portion of it with the wires coming out.
That's the actual generator. Since the engine speeds are consistently changing with different
RPMs and how the gearbox is turning. The CSD, the Constant Speed Drive, had to maintain a certain
speed to keep the generator turning at a constant rate. The power produced is very much similar to
modern jets. Each engine has one generator. They are brushless, air-cooled type. Rated around 40 kVA
with 120 to 208 volts. Three phase, 400 cycle per second output. The generator usually is held at
around 6,000 RPM. The red piping you see is the oil cooling for the CSD. Here's a nice little
schematic of it. Of the internals and pretty much the basis of the system. Feel free to pause and
check it out. Also gives you an idea of the internal workings of the CSD. All the gearing.
Right, moving on. We're almost done guys. Up next, that gray little box. I think most of you can guess
what that is. That's part of your ignition system. That is your exciter box. The exciter box energizes
your igniters, which gives you spark within your combustion section. The JTAD has a dual
ignition system. System A and System B for redundancy, and it has two igniters. Okay, I know
I'm bouncing back and forth. Bear with me. Moving back to the front of the engine, you see this
little radiator. I'm not 100% sure on this one, but help me out. Correct me if I'm wrong. I think that
is belonging to the CSD oil cooler. Remember earlier in the video, I mentioned the inlet pressure and
temperature sensor? Right there. That's the pressure sensor. That's a temperature sensor.
Better known as the P2 sensor and the T2 sensor. Another quick look on the other side of the engine,
and you'll see the corresponding anti-ice valves that we talked about earlier as well.
And here's the mount bolt that I talked about earlier as well. Look how small it is. There's
only three of them holding that whole engine up. Depending on the type of aircraft it's being
equipped on, it can be reconfigured to the sides or to the top. These engines can also be
interchanged within each other. Let's say if I want to replace number one engine with number
two and vice versa, I can move the mount bolts to the other side of the engine. As I said, these
engines are quite versatile. All right, moving on to the star of the show, the fuel unit. A few things
happening right here. One of them is a fuel metering unit. The other one is the fuel pump,
and as well as all the filtration system that goes behind it. This is a purely mechanical unit.
This has as direct control as you can get. Oh, before I forget, that's the EDP, engine-driven
hydraulic pump. Okay, back to the fuel and how it's controlled. From the throttle body down into
the pedestal via linkages, then go down to cables and pulleys and go route all the way down to the
back of the airplane, connecting at the back of the aircraft through the pylons and back to these
linkages right here, where the fuel is getting controlled directly from the throttle body.
That's quite amazing engineering for that time. Matter of fact, I got a pretty cool story for you
guys. Back in the old days when I used to work with some incredible master technicians who were
just pure experts on these engines, they were able to go up to this running engine and just by hand
adjust these link rods. True engine whisperers that could stand next to that engine and adjust
those rods and know exactly how much fuel it should be getting simply by the sound of it.
To this day, I'm always amazed by it. One thing I fail to show right here is the fuel nozzles and
fuel manifold because I don't have access to it, but the engine contains nine individual fuel
nozzles. One for each one of its combustion chambers. Towards the bottom of the engine, you'll
see some drain masts or these pipes that are coming out. Most of these are for individual components
and case drains. Overall, that's pretty much the majority of the components and the systems on the
JT8D. An absolutely phenomenal engine. I loved working on it and it's still running to this day.
They still have JT8Ds that are still in service because believe it or not, you still got some MD80s
still flying around. You still got some 737 with the classic engines, the Jurassic period, and you
still have 727s to this day flying around. My goodness, I completely forgot about one more
system. The thrust reversers. The thrust reverser is very unique on this one because it's very iconic
for that particular engine. It's clamshell type. Works very much like the fuel system. Very
rudimentary. Very mechanical. Mechanically actuated. Hydraulically assisted. Same type of cables that
ran from the front to the back for the fuel system, run from the front to the back for the thrust
reverser. And trust me, when they snap shut, you don't want to be anywhere near them because the
actuators that are powering those thrust reverser doors are pushing 3,000 psi. And a fun little fact
for you, back in the old days, back when it was allowed on airports, aircraft with such thrust
reverser systems were allowed to back up using the thrust reverser system. They don't let them do
that anymore. But I think some military jets still do it. Thank you all very much for watching. I hope
you guys enjoyed it. Please feel free to add more information if you got more information about
these engines or these aircraft. I'll leave you with a few images and a couple of videos I took
in the past and some old pictures from good old memory lane. But yep, that's about it. Thank you
all for watching. Take care. I'll see you all later. Bye!
