BMW's 5-Minute 1,400 hp F1 Engine

FORMULA 1
74 followers
5 Video Views·Apr 14, 2025
How often do you encounter an engine that spans nearly three decades of its lifespan
and manages to power essentially anything from a road car to race cars with up to 20 times the
power of the road car engine? Seemingly an ordinary 4-cylinder was over-engineered and
built so robust that it found its use in all kinds of automobile applications,
including the most powerful Formula 1 to this day.
The story begins with a racing driver and engineer Baron Alex von Falkenhausen,
who sketched a brand new inline-four for BMW. Designed for ordinary automobiles,
specifically the Neue Klasse, the displacement started at 1500 cc, a living space for enlargement
up to 2 liters. Initially known as the M115, with the 15 suggesting its volume,
the engine consisted of a cast-iron engine block and a cast-aluminum cylinder head.
Considering it was introduced in 1962, it was solidly built with five main bearings,
forged counterweighted crankshaft, and a chain-driven
single-overhead camshaft head with hemispherical combustion chamber.
Racing potential of this relatively unassuming engine was unleashed soon after in the late 1960s.
BMW experimented with the engine, using a special radial valve configuration,
but due to its redundant complexity, it was soon dropped.
Later in the 70s, the FIA changed the rules for Formula 2 and allowed 2 liters from 1972.
With Nocken Paul Rocher as the lead engine designer, the team engineered a high-revving
beast of a motor that absolutely crushed the competition in a March 732, with Jean-Pierre
Jacques Charrière behind the wheel. The engine received titanium connecting rods
and a compression ratio as high as 13 to 1.
While the Formula 2 success was evident, the Munich company would not stop there,
standing right in front of its biggest challenge. In the late 1970s, Renault proved that Formula
1 was heading towards the turbo era and Cosworth's domination was about to end.
BMW's turbocharged 1.4L M12 variant of the engine managed to reach over 550hp at 2.6bars of boost
in a touring race car, which was significantly more than the DFV.
Engineers realized the potential of the M10-derived turbopowerplant,
and Rocher, with team manager Jochen Nierpasch,
overseeing development, began to create a suitable engine for the F1 journey.
As the turbo coefficient was 2, unlike 1.4 elsewhere, the engine displacement with
forced induction was allowed to be just under 1500cc. Initially, the goal was to hire Niki
Lauda and collaborate with McLaren, but neither of these materialized, and the BMW board refused
to greenlight the project. Nierpasch resigned, and with Dieter Stampert as his successor.
With more conviction, the board eventually gave it a try with Brembo.
The power of the M12 engine was now approximately 7 times more than the stock power of the road
engine. Amusing thing is that they didn't even use a special block. All these race engines were
based on the original cast-iron unit that had already covered over 100 000 km, which was more
than enough for any casting imperfections to manifest. Then, by order of Rocher,
they were stored outside for months to experience heat and cold temperature changes,
rainy weather, and there is a myth that employees were allowed to urinate on them.
While all the others used twin-turbo V6 and V8 units, BMW went a different way with the
inline-four single-turbo. With the possible 2-litre large man in mind, the M10 had enough
material, and the block itself was incredibly strong. The fact that it had only four cylinders
meant that it had also fewer valves, a smaller footprint, less friction, and produced much less
heat. This allowed the Brabham chassis designer, Gordon Murray, to accommodate smaller radiators,
make the body sleeker, and achieve better straight-line performance.
The M10-13 had cylinders of 89.2 by 16 mm in size to allow a 9.5 to 11.5 000 rpm limit.
The internals were ruggedly built, with Marley pistons and titanium connecting rods. Compared
to the M10, the M12 had valve-trained gears for camshaft drive and a drive-sump oil lubrication.
The compression ratio was dropped from the naturally aspirated race version of 13 to 1
to 7.5 to 1, and later even lower to prevent detonation, and a single triple-k turbo was used.
The power began at 550, then in 1983 it reached 680, and later 740 up to 900 hp racing trim.
Without boost pressure regulation, the sky was basically the limit, and with the special fuel
that BMW used, the loose wording and the wrong 102 octane limit were not enough to prevent
development of a custom fuel for the application.
Roche worked with 41 other engineers on the engine, they had plenty of resources at their disposal.
At the time, Brigham, then owned by Ben Acklestone, initially used the DFE before
early reliability issues and troubles of the BMW engine were solved.
The Brigham-BMW cooperation nearly fell apart, as the engine kept malfunctioning due to the
injection and ignition issues caused by the massive power surge. It utilized a Bosch ignition
and Google Fischer injection, and it took some time before they developed a suitable map.
The desired achievement finally came in the middle of the 1982 season,
when the BMW-powered Brigham BT50 secured its first victory in Canada with Nelson Piquet.
This marked the beginning of the turbo era and the end of the ultimate Cosworth era.
When the BMW engine was fully utilized in the championship,
Piquet managed to secure his second title in 1983, which was also the peak year of the
Brigham-BMW cooperation. After 1983, victories were scarce and most of the time, the car
achieved a lower position or retired. The engine of the turbo often failed in 1984 and 1985 seasons.
Furthermore, with a 220 liter fuel limit per race, its fuel consumption often prevented it
from finishing successfully, as the M12 used a tremendous amount of fuel to prevent detonation
and help cool the internals. Admittedly, the BMW M12-13 was the most powerful unit on the grid
in 1986, which was also the single year when naturally aspirated engines were not allowed
to participate. BMW went full crazy in 1986, developing the M12-13-1 engine that was laid
down 72 degrees for the Brabham BT55, while the Benetton B186 used the upright version.
The Benetton managed to secure a single victory in Mexico in 1986
and achieved a high stop speed of 352 kmph in Italy, but that was about it.
The engine reached boost figures over 5.5 bar as the wastegate was locked shut during
qualifications. Under these circumstances, the engine basically delivered the best possible
performance for a couple of minutes before it granulated itself into halves in the car park.
Gordon Murray said that they used dry ice and water spraying on the intercooler to cool that
beast down just to get that one perfect qualification lap, and it would last a couple of
minutes. No dyno was able to precisely measure the engine power beyond 1000 hp, the estimated
peak power was upwards of 1200-1300 hp, some even say 1400 hp, which is like 20 times the
power of the stock motor, and nearly 1000 hp per liter. It's hard to imagine such power figures
from an engine this tiny. The turbo lag was beyond imaginable, and the throttle timing
out of the corner must have been planned precisely. Anyway, it's incredible what
Roche was able to build from what seemed like a normal, boring piece of an engine.
