IndyCar vs Formula 1 car; Technical Comparison

FORMULA 1
74 followers
Apr 8, 2025
Formula 1 and IndyCar. To the untrained eye, the two racing categories might look, well,
the same. They're both incredibly quick single-seater racing cars,
piloted by some of the world's best drivers. But that's more or less where the similarities end.
IndyCar is a very different breed to F1 altogether. Teams buy in their cars rather
than develop them themselves. And there's just two engine suppliers on IndyCar's books,
instead of the four manufacturers that F1 has involved. Furthermore, IndyCar racing
has a significantly complex history. The CART-IRL split of 1996 could be worth a video all on its
own, and the eventual reunification of teams after ChampCar was bought out in 2008 all add to the
series' rich tapestry. With IndyCar receiving a surge of popularity around the world in recent
years, Fernando Alonso's appearance in two Indy 500s, sort of, the likes of Marcus Ericsson,
Felix Rosenqvist and Romain Grosjean defecting from F1 and Formula E to join up, and the addition
of Supercar's champion Scott McLaughlin, perhaps it's time to compare this year's F1 title defender,
the Mercedes W12, and IndyCar's title defender, Scott Dixon's Chip Ganassi racing machine,
side by side. Overall, the cars don't look dissimilar, but work to very different concepts.
Both have slightly raised noses to open up the floor to clean airflow, for example,
but IndyCar has a few extra differences with its rear wheel guards and lower engine cover,
to help mitigate things like drag. As Formula 1 focuses on making its side pods smaller and
each year, IndyCar's side pods are much rounder, and don't endure that level of development.
For some stats, IndyCars are around 770kg, which is heavier overall than an F1 car at 752kg in 2021.
An F1 car is 2 metres wide, around 5.5 metres long, and pushes out around 1000bhp. It can also
do over 350kmh in low drag trim. An IndyCar, meanwhile, is about 1.9 metres wide, 5.1 metres
long, and can produce up to 700bhp depending on the turbo boost. But in oval trim, it can
theoretically hit 370kmh, thanks to the reduced aerodynamics. One of the biggest visual differences
between F1 and IndyCar is the difference in choice of head protection system. F1 added the halo to
the 2018 regulations to ensure the drivers could be protected from impacts and debris.
IndyCar's head protection device has the frame of a halo within it, but the series employs the
AeroScreen, which adds a reinforced polycarbonate windshield to further protect the driver inside.
This was introduced for 2020, and although drivers reported that it made the handling
a little different, they found eventually that they didn't notice it. Although the AeroScreen
reduced driver cooling, the drivers are connected to an air pump to keep them from getting too hot.
As we all know, aerodynamic development within the bounds of the regulations is relatively free
in F1. Teams come up with different aero packages for different circuits, depending on whether
they're low drag or high downforce venues, and tailoring the cars to everything in between.
IndyCar has just two aero packages to play with, both distinctly different as they're
tailored for very different events. The standard aero kit is employed for all road courses and
the short ovals, such as Gateway on the 2021 calendar, and provides the most amount of
downforce overall. This comes with a full three-element front wing, although the third
is often removed for short oval races, along with a full-size rear wing and dipped wheelguards to
improve the overall downforce. Formula One cars meanwhile have five wing elements in total,
featuring a straighter end plate which feeds airflow around the front tyres. An F1 front wing
also has exposed tips, which aerodynamicists like to use to generate vortices to protect the rest of
the car from the front tyre wake. But for the large ovals and superspeedways such as the Crown
Dual Indy 500, the aero is stripped back for pure speed. The front wing is completely trimmed back
to its main plane and the rear wing is cut down to a deltoid-shaped wing for balance.
Moving on to the car's floors, IndyCar has a hole at the front of the sidepod to minimise the chance
that the car can become airborne in a heavy incident. Formula One cars as of 2021 use flat
floors with a diffuser at the rear, but for 2022 will transition to a Venturi tunnel arrangement
to reduce the reliance on the overbody wings producing downforce. This is something IndyCar
already does with two tunnels that sweep between the rear wheels to assist the expansion of airflow.
With a larger expansion area, the cars generate enough downforce to keep the cars on the road,
even when trimmed out for the superspeedway events. However, an F1 car generates much
more downforce compared to an IndyCar, especially given its open development overall.
Formula One uses a turbo-hybrid engine formula, underpinned by a turbocharged 1.6-litre V6 engine.
The hybrid components include an MGU-K, which regenerates energy from braking and deploys it,
an MGU-H, which regenerates energy from the turbo off-throttle and helps to spool it up
as a driver accelerates, and a battery pack to store that recovered energy.
Currently, Formula One has four manufacturers developing powertrains, Mercedes, Ferrari,
Renault and Honda, although Honda's powertrain will be taken on by Red Bull from 2022.
Although IndyCar also employs V6 engines, these have a displacement of 2.2 litres,
and have a twin-turbo arrangement. The turbos are supplied by BorgWarner,
which also lends its name to the Indy 500 winner's trophy.
Both Chevrolet and Honda supply IndyCar powertrains. Chevrolet's engine is designed
and built by Ilmore, while Honda's US-based performance development arm produces the
Honda units. IndyCar will move to hybrid powertrains in 2023, with displacement to
rise to 2.4 litres in addition to the hybrid systems on board. There's also a difference
in fuel between the two series. Formula One's rules mandate that 5.75% of the fuel currently
used must be from a sustainable biological source, but from 2022 the plan is to increase that to 10%.
For the next engine cycle, expected to be in 2025, Formula One hopes to ensure that 100%
of the fuel is from an e-fuel or renewable synthetic composition.
IndyCar already uses E85 fuels, with 85% bioethanol and 15% gasoline,
with the biocomponent produced from corn. The series has also suggested that it would like
to switch to an e-fuel in future, which have been feted as a carbon-neutral drop-in fuel
that could theoretically help motorsport shift away from hybrid components.
Formula One also has power steering, while IndyCar doesn't, meaning that the drivers
have to work harder at the wheel. But the IndyCar formula is much more simple,
and so setup rather than development is key. Pirelli supplies three compounds of tyre for
each F1 race, red-walled softs, yellow-walled mediums and white-walled hards. IndyCar has
just two supplied by Firestone for the road and street races, the red-walled soft alternate tyre
and the white-walled primary hard tyre. Tyres for oval courses are different and
are of a single type, with slightly larger diameters on the right-hand side to account
for the oval banking. IndyCar also has fuel stops, which has not been part of Formula One
since the end of 2009, and so the Dallara chassis they use have a smaller 70-litre fuel tank.
An F1 car has just over 1.5 times that, given it's permitted to have 110kg of fuel on board the car.
But just how different are they in terms of performance? By way of measuring that between
the two categories, let's look at a venue that they both visit, the Circuit of the Americas
in Austin, Texas. Formula One last visited the circuit in 2019, where Charles Leclerc set a 1
minute 36.169 second lap during the race. IndyCar was 12 seconds slower at that track that year,
with winner Colton Hurter setting a 1 minute 48.8953 second lap time en route to his first win,
a second slower than an LMP1 car. But on the flip side, IndyCar did take a slightly more
lax approach to track limits. The formats of the two series differ too. F1 in 2021 has 23
races spread across five different continents, while IndyCar has 17 races spread across the USA
and Canada, and spans purpose-built circuits, ovals and street courses. Formula One has 10
teams with two cars each, while IndyCar has teams running as many as five or six cars at select
events. Cars can run part-time in IndyCar, while some drivers opt to avoid the oval rounds and
share their entries with another driver. Ed Carpenter, for example, only races for his own
team at the oval rounds, and shares his car with Connor Daly in the 2021 season.
So, if you're a Formula One fan and fancy dipping your toe into the world of IndyCar,
there's lots of different things to enjoy. You might spot a few familiar faces,
all looking to try their luck in the US of A. And sure, IndyCar's machines are a little slower
than F1's, but there's certainly no lack of action or excitement in IndyCar today.
With the drivers constantly on the edge and the technology being pushed to its limits in both
series, both cars represent different pinnacles of motorsport engineering.
