For more than 130 years, the crankshaft has been utilized in internal combustion engines to transfer the reciprocating linear motion of the pistons to rotary motion so it’s available for propulsion, pumping and power production.
The function of the crankshaft design represents a major shortcoming in the transfer of motion, due to the limitations of its inherent geometry, creating numerous inefficiencies and negative impacts in the overall design of the engine.
The CV engine design replaces the crankshaft with a Powershaft & Rodrack Assembly. The CV engine design produces as much as 58% more torque than a crankshaft-based engine producing equal power, while cutting fuel consumption by more than half and slashing exhaust emissions by more than 70%.
The Constant Velocity Motion Technology is the solution to nearly all of the inherent design and functional limitations created by the geometric inefficiencies of crankshaft-based engines, pumps, compressors, air motors, hydro-generators and other applications, both existing and yet to be invented. #machine#engine
With extraordinary fuel efficiency, fewer and cleaner emissions, impressive power to weight
ratios and full range torque, this simple engine design will revolutionize energy and transportation.
Let's compare the CV design to the standard crankshaft. One advantage of the CV engine is the
number of power strokes per shaft rotation. Firing each cylinder twice as often allows us to cut
engine rpm in half, thereby reducing wear on internal components, prolonging lubricant life
and requiring fewer transmission speeds. Here is the familiar crankshaft or CS design. Note how
there is one brief moment where the lever arm is at its maximum. This is the instant of its highest
potential leverage or torque and is indicated by the yellow highlights here and here. The red
highlights shown at top and bottom designate piston top dead center TDC and bottom dead center BDC
and this green arrow represents the position of center shaft rotation. Now imagine if you were
able to increase the same leverage by 40% and then extend the amount of time that the full torque is
available from just a minuscule moment to 85% of the stroke. This is what the CV design achieves
for the internal combustion engine. Here is the torque curve for the CV design. Shortly after
ignition occurs and combustion pressure is at its highest, the CV reaches its maximum leverage,
transferring the piston linear motion to rotary motion with over five times the power output of
the CS. This is also beneficial for the use of rapid burning fuel such as natural gas, ethanol or
hydrogen. With this advantage, less fuel is required to produce more power. Combining this fuel reduction
with a more complete burn and shorter ignition duration ensures CO2 and NOx emissions will be
significantly reduced. Let's compare the piston side load of a standard crankshaft engine. The CV
design inherently has no piston to cylinder wall contact. This eliminates piston wear, cylinder
wall scoring, internal contamination and related premature component failure while also providing
increased thermal efficiency through the reduction of friction related heat. Now let's look at
combustion pressure data taken from a running diesel engine. As the ignition of fuel occurs
and pressure is at its highest, the CV engine will be able to transfer that energy into rotational
torque just after piston TDC. The crankshaft design reaches full torque nearly halfway through the
while pressure is considerably diminished. This advantage allows the CV engine to capture higher
combustion pressures and because of this, we estimate over 50% fuel savings.
Here we have the CJ2 prototype. With its hollow power shaft, we can utilize a common shaft down
the center to couple the engine with the transmission in a modular format. Using an
electric direct drive motor, we can begin to turn the common shaft. At this point, the electric clutch
engages and begins turning the center hub which is directly connected to the engine's power shaft.
This configuration allows for multiple engine couplings such as a two-cylinder and a four-
cylinder to operate in tandem as power demand fluctuates. Energizing the clutches to combine
power units as needed provides another layer of efficiency by matching load requirements.
In this scenario, the four-cylinder CJ2 is required to begin moving the vehicle. The direct
drive electric motor is energized and the clutch engaged and as soon as the engine starts, the
electric motor can now begin to act as a generator providing power for ignition and accessories.
Shifting the transmission from neutral to drive, the CJ2 gets things moving. As power demand
increases, the two-cylinder CJ1 clutch energizes and provides additional capacity. When the power
demand decreases such as with city driving, the CJ2 clutch can then be de-energized and that engine
shut down offering an even more efficient mode of operation.