Bem-vindo ao Tudo Planta Artesanato com Cimento! Você adora artesanato e está sempre em busca de novos projetos DIY (faça você mesmo)? Então, você está no lugar certo! No nosso canal, você encontrará uma variedade de tutoriais criativos e inspiradores que transformarão simples materiais de cimento em verdadeiras obras de arte para decorar sua casa e jardim.
É maravilhoso ter você aqui comigo!! confie em mim, você vai amar trabalhar com reciclagens!! vamos juntos? (siga o perfil me ajude a divulgar) se gostou deixe comentario! if you like follow me and share si te gusta sigueme y comparte
Participe da Nossa Jornada! Não se esqueça de se inscrever, curtir e compartilhar nossos vídeos para não perder nenhuma novidade. Deixe seus comentários e sugestões - adoramos ouvir suas ideias e feedback!
Hello, my loves. How are you? Is everything really okay? Are you sure? I'm so happy to
have you here with me in another video. The long-awaited video, right? A lot of people
asked for this teddy bear. Well, since you were already waiting, then it's here. Give it a thumbs
up, okay? Because then I'll know that you liked it, that you're already enjoying it and that you
want more things here on the channel. Well, let's recycle some more styrofoam and we're going to
So come with me, my loves. Let's make a stand to put the plant, okay? To give as a gift. People
will love it. But then you can make it any size you want, okay? This one here will be my base.
My little table to put the plant pot on top. I got an iron here. I'm going to measure it like this,
look. And I'm going to fold it here. Here I'm going to fold it like this, look.
Just so that it stays in place and the pin doesn't keep spinning.
And then the dough I'm going to use here is cement with styrofoam, okay? Okay,
just so it doesn't stick too much. It ends up helping me when it's time to unmold.
The three fingers of dough here. The circumference of this pot is 25 centimeters, okay?
25, so, I'll come back when it's dry. It turned out like this, super light. And I'm going to
leave these details like this, okay? From the plastic, I think it's really cool.
I'm going to set it aside here so we can continue. There's some dough left over here,
so I'm going to trim it down a bit, okay? Here there's just a little bit left over and then I'm
butt that's going to be sitting here. His belly, waist, and arm are half of him, right?
Later we're going to do more filling, okay? On the other side. Now here we're going to
I'll put it in the sun. Quick, let it dry so we can do the back too.
Tomorrow, right? In this case. Well, the next day I put it in the sun yesterday, right?
So, now we're going to do the side B here. How did it turn out? And we're going to work here now.
I'm already in love, guys. Really, that's not a little. I really like little things like that.
They're lively, cute. I really like them. To have the piece standing up,
just grab it on the rough spot, drag it until it corrodes and make the base, okay?
I taught you this. Just pass it on the ladder, on the floor. Mine is on my table. It's a little
over there. Look, to do another gluing here, you're going to make some slits in the piece
so it can penetrate and make the union. I've already prepared the paste here. It's the same
paste, okay? Now I'm going to start gluing it, right? I'm going to wet it here. Look, a lot.
Night. See? I'm going to put it in the sun, lying down. On its side. When you look at it from the
side, you can see the volume, okay? Sometimes you can lift it up quickly and look at it more
or less from the side. And then the ideal thing is to work like this, right? With it lying down
so that the dough doesn't go down. Because it's a lot of weight. While it's wet, it's quite heavy.
Once it's dry, it's easier. I know you're curious to know how I'm going to put this piece in here.
I'm just going to drill it, okay? But then I'm going to make a little hole in the little key.
Something like this. So I can fit it in, okay? Plans change when things get really difficult.
My intention was to stick this wire all the way down, right? To stick it all the way down,
as if it were easy to get in. Which is actually what I said, after 48 hours the dough is already
very hard. When it's only 24 hours, we can still stick it in at the end because it's still soft
inside. But when it dries, this thing here becomes a strong rock. So there's going to be
a change of plans, okay? So I'm going to do it because I couldn't get it in here all the way down,
no. So I'm going to make a hole here with the screwdriver to anchor it right here at this height.
Let's go, let's recap. Here I made this one. I put this long iron because I wanted to stick it in
here. But since it spent many days, right, more than 48 hours drying, it got very hard in here.
I couldn't get it through. This thing here becomes a rock, so I couldn't. You saw there
that I took the screwdriver, stuck it in, started hitting it, turning it, until I made a cavity
inside here. And then I cut it to the limit of the screwdriver and stuck it here so I could anchor
the piece inside here, okay? In this case, here we have to center this little stool so it's really
straight later, okay? But now I'm going to work on the rest of the modeling. I made a little more
cement paste with styrofoam. It's the same paste to continue making the things I have to do,
see? It's dry, and then I'm going to cover it. So, first I'm going to cover the whole piece,
then we'll do the details. So, the most important thing now is to cover it. And since it's soft like
this, the fact that the piece is dry, it absorbs it quickly and then sticks quickly, you know?
I'm going to try not to make it too thin either. It doesn't need to be anything coarse either.
You don't want it to be smooth like that. You can make the furry textures too.
Don't hit it with your hand like that. It already creates a texture, okay? If you don't do it now,
later you can take some cream that's a little bit pasty and then you can sprinkle it like I did with
Now I'm going to turn it over. I'm even going to make the bottom here so I don't have to
crush it. Don't be afraid. Did you see how it got crushed? But then we shape it so that it has a
nice crush, not an ugly one. And if you're looking from there, you'll see that there's the other ear,
right? Sew it right on the cup. Ready. Then I can wait for it to dry a little and take it off.
Just to compress the other ear a little, okay? So I know where it's going to fit.
It's like a prosthesis, see? I'm super dry. If you want to seal this piece,
you're going to put it in, wet it, put cement here in the middle and here in the middle too.
And then you're going to put it in and it'll be sealed, okay? I'm not going to seal it.
You can do it all over his body. Make him all hairy, okay? That's it. I'll be right back.
He's already finished and after the hair's here, I'm going to let him dry and I'll be right back.
Here, look, I plastered him all over. He's all hairy here. After it's dry, we can make some depth,
okay? So I made some depth here. We can fix it. Then I pulled it all the way down.
And here, look, I made a line. Take it from here to here. Take it from here to here.
It's finished. I'm going to wait for it to dry and then I'll come back just so we can sand and
paint, okay? Come on, let's try it then. Elle, she chose black, right? So, I'm going to go to work.
Use an airbrush. I like the airbrush because it goes where the brush can't
I'm going to use the airbrush to resin it and then I'll come back with it finished.
My loves, I'm going to have to record it like this because it belongs to a client,
okay? So I'm not going to do much so as not to ruin the painting. So, but you can get a rough
idea. Yes, this is for putting a base, right? But I don't have a base. But there are some artificial
flowers there. Just to give you an idea of how the context will look, okay? But it's a little
stand to put vases on and, anyway, I think it will look really cool in your house. I want you
to do it, okay? I hope you like the painting too. Sometimes it's really hard to show the painting,
but you can get a rough idea. Here it's nothing special. It's black with a little beige here on
its snout, on its paw. Nothing, nothing special. No, it's really easy, okay, my loves? That's it.
Let me give you a 360-degree view. I made it with all the love in the world so you can make it too,
right? And sell it. It's really beautiful. Mother's Day is almost here. You can make
this piece by recycling it, which is the best thing and you can earn a little money.
You can earn a little money. I'm going to ask you to like the video, okay? And share it,
subscribe to the channel, so you'll give me more motivation to create more beautiful things for us.
A big kiss. May God bless you all and see you soon. Bye, bye.