The German Bundeswehr plans to procure a new main battle tank starting in the 2030s as an interim solution until the introduction of the Main Ground Combat System (MGCS). This project is known under the designations Leopard 2 AX, Leopard 3, or simply Interim Solution. In this video, you will learn everything that is currently known about the future main battle tank of the Bundeswehr. Questions and suggestions are welcome in the comments.
Chapter -
00:00 - Introduction 00:45 - The Interim Solution 03:38 - Technical Data 09:38 - Conclusion
Welcome to my channel, your place to go when it comes to security and defence policy. On this channel I cover the following topics: Weapons and technology, armed forces and security and defence policy. I would like to use this channel to finally pursue my passion for this topic and look forward to every interested listener and lively discussions on the subject. I am always available for questions and suggestions.
Sources -
The German Bundeswehr plans to procure a new main battle tank starting in the 2030s
as an interim solution until the introduction of the Main Ground Combat System, MGCS for short.
This project is known under the designations Leopard 2AX, Leopard 3 or simply Interim Solution.
In this video, you will learn everything that is currently known about the future main battle
tank of the Bundeswehr. And with that, welcome to a new video on my channel.
If you want to stay up to date on security and defense policy,
feel free to subscribe to my channel so you don't miss any of my future videos. Let's get started.
Starting in the 2030s, the German Army requires a new main battle tank to bridge the gap until
the introduction of the MGCS. Since the MGCS is expected to replace the Leopard 2 around 2050,
the interim solution is anticipated to have a service life of approximately 20 years.
This new tank is expected to incorporate certain features and capabilities of the MGCS.
At first glance, the Leopard 2A8 seems like a natural choice. However, its procurement is
primarily a political decision aimed at achieving full equipment levels as quickly as possible.
The Leopard 2A8 does not fully meet the Army's requirements for a modern main battle tank.
In particular, it still has significant gaps in protection, mobility and sensor technology
compared to the Army's expectations. To address these shortcomings, the Army is evaluating possible
upgrades within the framework of the Leopard 2AX project, though this designation is still a
provisional working term. The project aims to achieve further improvements in firepower,
protection, mobility and night combat capability. Ultimately, the goal is to field a main battle
tank that is adapted to the current threat landscape and surpasses the Leopard 2A8 in
combat effectiveness. To explore these improvements, KNDS Germany, Rheinmetall and Henselt have been
commissioned to conduct a series of technical studies, which we will examine in more detail
shortly. According to the Bundeswehr's procurement office, the results of these studies are expected
by the end of 2026. Only after this will decisions regarding configuration and production numbers be
made. According to Hartpunkt, between 90 and 300 of these new tanks could be procured. Interestingly,
the Leopard 2AX initiative originally started with the intention of modernizing approximately
100 Leopard 2A5 and A6 tanks that had not yet been upgraded. However, current indications
suggest that the Bundeswehr is now considering acquiring brand new main battle tanks to replace
older models instead. The final quantity will depend on whether only the 100 unmodernized
Leopard 2s are replaced or whether nearly all pre-A8 versions will be phased out. Moreover, a
further increase in production numbers is conceivable due to new NATO capability targets.
From 2031 onwards, Germany might be required to provide NATO with two to six additional combat
brigades. And these are expected to be armored brigades rather than light or medium formations.
If this requirement materializes, the Bundeswehr's demand for main battle tanks could increase by
several hundred units. However, both the planned procurement starting in 2030 and the final number
of tanks face a major obstacle. Funding. At this stage, no clear financial commitment has been made,
leaving the future of the project uncertain. The main armament for the new battle tank is
planned to be the 130 mm smoothbore gun Slash L-52 from Rheinmetall, which is expected to be
significantly more powerful than the currently used 120 mm smoothbore gun. According to Rheinmetall,
the new gun's caliber, which is 8% larger, delivers around 50% more kinetic energy, thereby
significantly increasing the tank's penetration power and overall effectiveness. As part of the
Leopard 2AX project, Rheinmetall has been commissioned to conduct three technical studies
focusing on the development of specific ammunition types. The DM-13 ammunition is
intended to serve as the qualification round for the future tank gun and is being specifically
developed for the economic and timely certification of the new weapon system. Additionally, the DM-11
multifunctional high-explosive ammunition and the DM-23 kinetic energy ammunition are being finalized
for use with the 130 mm gun. The prototype of the 130 mm gun was first presented at the
Eurosatory Defense Exhibition in Paris in 2016. It has a length of 6.6 meters and weighs over
3.5 tons compared to the approximately 3 tons of the currently used 120 mm gun.
The ammunition weighs over 30 kilograms and is approximately 1.30 meters long,
making an autoloader necessary. This requirement leads to structural modifications to the tank's
turret and hull, further increasing development and integration efforts, as reported by Hartpunkt.
Additionally, KNDS Germany and Hensel have each been tasked with a technical study for the
development of an automatic field calibration system. Currently, the Leopard 2 relies on manual
field calibration performed by the gunner to compensate for thermal effects such as sun
exposure or barrel stress. An automated calibration system would reduce crew workload,
shorten calibration time, and ensure consistently high precision.
Another key consideration for the tank's armament is the integration of a remote-controlled weapon
station. This station could be equipped with a heavy machine gun or an automatic grenade launcher
intended for use against lightly armored vehicles, enemy infantry, and especially drones.
However, to counter drones effectively, the necessary sensor systems for drone detection
would need to be integrated. The protection level of the Leopard 2AX is also set to be
significantly improved compared to older versions. One of the key enhancements is the
multifunctional self-protection system, 2.0, MU-S 2.0 for short, an advanced version of the
MU-SS system, which will be introduced with a second batch of Puma infantry fighting vehicles.
MU-SS 2.0 was first unveiled at the Eurosatory Defense Exhibition in the summer of 2024 and
features reduced weight, a smaller silhouette, and enhanced capabilities. The system includes
four passive sensor heads with missile and laser warning sensors, a central control unit,
an advanced infrared jammer, and a countermeasure unit. According to the manufacturer, MU-SS 2.0
is capable of detecting anti-tank guided missiles, tracer rounds, rocket-propelled grenades,
muzzle flashes, and kinetic energy rounds. Additionally, it can precisely identify and
classify low-power lasers used in beam-riding guidance systems and laser rangefinders.
The system enables simultaneous detection, prioritization, and neutralization of multiple
threats, with all data being integrated into the battle management system.
KNDS Germany has been commissioned to further develop and integrate MU-SS into the Leopard 2AX.
This version will feature optical detection capabilities, a globally unique technology.
Using the cat's eye effect, the tank could actively scan its surroundings and detect reflections
from enemy optical systems, allowing it to identify even well-camouflaged weapon and
In parallel, Hensolt has been contracted by the BAAE and BW to develop the ODEON protection system,
a demonstrator for the automated detection of enemy optical systems.
The design phase began in December 2024, and the contract runs until the end of 2026 with a budget
of 17.6 million euros. ODEON is based on the MUST JAMMERHEAD 2 technology and is designed to detect
enemy drones and targeting systems in real-time, alert the crew, and display the threats.
Future development stages will add jamming and dazzling functions to disrupt enemy
reconnaissance systems using electronic interference and strong light pulses.
ODEON will function as a multi-sensor system that can be networked with existing systems,
helping to reduce false alarms. In the long term, a fusion of ODEON and MUST technologies
is planned to ensure comprehensive protection for the Leopard 2AX. Additionally, the active
protection system trophy is expected to be included in the tank's defensive suite.
To enhance the mobility of the Leopard 2AX KNDS, Germany has been commissioned to develop a new
engine called OLYMP. Unlike previous Leopard 2 engines, which were produced by MTU, this engine
is being developed by Liebherr, a first for the company, as Liebherr has only previously supplied
engines for infantry fighting vehicles and never for a main battle tank. According to a BAAINBW
statement, the OLYMP power unit will be a self-contained system comprising a combustion
engine, steering transmission system, cooling system, combustion air filtration, and exhaust
system. As part of a study to improve agility, the new power unit will be developed using as many
existing components as possible from the current system. If all technical studies are successfully
completed and the Bundeswehr decides to implement all the proposed new capabilities, the new main
battle tank would fundamentally differ from the current Leopard 2. Whether the future tank will
be designated as Leopard 2AX or Leopard 3 will largely depend on its final configuration.
As mentioned earlier, this new tank is intended to serve as an interim solution until the
introduction of the German-French MGCS. Given the complex history of joint tank projects between
Germany and France, this approach appears necessary. Previous attempts, such as the Standard Panzer
and the Kampfpanzer 90 program, failed due to differing defense policies and tactical requirements,
ultimately leading to national solutions. Furthermore, budget constraints in the past
have often turned interim solutions into long-term fixtures. Although history does not necessarily
have to repeat itself, doubts remain about the successful completion of this third attempt
of a German-French tank development. Many voices from politics, the armed forces,
and procurement organizations express skepticism about the MGCS project, which is primarily being
pushed forward at the highest political level, not necessarily out of strong belief in its success,
but rather out of concern that abandoning it could further strain the already tense relationship with
France. That concludes the overview of the Bundeswehr's future main battle tank. If you
enjoyed it, please give it a thumbs up and subscribe to my channel, so you can stay up
to date on security and defense policy in the future. A big thank you to Moritz, who will
undoubtedly do a great job editing this video again. And thank you to all of you for watching.
Hopefully, see you next time.