Learn how to create stunning translucent flowers using copy paper and this fun technique! Ad the flowers to your cards, scrapbook pages, journals, home decor and more!
Hey everyone, I've got a quick technique for you relating to a video that I put out just
a week or so ago showing you how to make copy paper almost translucent with clear embossing
powder.
Now when I did this I did it with a butterfly but this time I want to show you how to make
flower petals with the same technique.
They look absolutely adorable and really really easy to do as well.
Now this card here I've used hand cut flower petals so I've simply drawn myself a rough
flower shape, large, medium, small and then even smaller and done this technique.
But I'm going to show you using some dyes this time.
You can use either or depending on the size of flower you want and whether or not you've
actually got floral dyes.
So as I said before we're going to be using copy paper.
So this is just the regular paper that you put in your printer, really nice and thin.
Ideally the cheaper the better so get using that paper that maybe it's actually too thin
for some of your printing, use that.
I'm going to cut four of these floral dyes and I can't even remember the name of the
dyes I've had these years, hopefully you'll have something similar in your stash.
Now because I'm only cutting copy paper I've folded this in two because I know that it's
going to cut through absolutely beautifully and it just speeds up the time it takes to
create these flowers.
Now I'm going to add some colour to my petals.
If we look at this one I added a peachy pinky colour in the centre.
This time I'm going to do a pale blue just for a little bit of difference.
Any colour that matches your project or just leave them white if you're just trying this
out.
So I'm just going to take an alcohol based pen and I'm going to flick some colour out
from the centre towards the edges of the flowers.
Now I'm only keeping this in the centre, in fact this pen has pretty much dried up so
I'll probably have to get another one.
You can mix and match your colours within the layers, that's absolutely fine.
So now I've got my colour laid down it's time to make these really look like glass.
I'm going to take some embossing ink.
Now lots of people have told me you don't have to use embossing ink for this, if you
prefer to keep your pads fully saturated and not use as much ink you can use something
like glycerin.
So I'm just going to press each of my copy paper petals starting at the front, it doesn't
matter, you could go to do the front and the back anyway, but press it all into the pad
and then set that aside onto a heat resistant mat while we do the others.
You can do these one at a time if you prefer but I like to speed up my crafting as much
as possible and just get these all inked first and then do all the powder second.
Once the flowers have all been coated with a layer of clear embossing ink I'm going to
put over some clear embossing powder.
So for this I'm just going to sprinkle it over each one onto a scrap of cardstock so
that I can reuse the excess powder.
Just use a pair of tweezers, pick that up and lay it back on my heat resistant mat ready
for melting.
And then repeat this with the other two, I'm going to press these into the excess powder
instead of pouring it on top, make sure you've got everything covered and the same with this
fourth one.
Now I'm just going to move my powder out of the way for a moment while I heat set these.
So I'm taking a craft heat gun and I'm just going to hold them over the top, now you may
want to use a pair of tweezers or a pokey tool to hold them still but in general if
you're just heating from directly above you shouldn't have any issues with them blowing
around.
As you can see with these ones we've already got quite a bit of translucency there but
we're going to build that up even more by popping the back side, the reverse side into
our embossing ink and into our powder and coating that side too.
So in exactly the same way as we just did we're going to press into the powder, ensuring
you get the tips of the petals, that's most important because that's really the bit that
you're going to see on these bottom layers and then tapping over here into the powder
and laying down ready to heat set.
Now do bear in mind when you heat that second layer the layer underneath is likely to remelt
as well or at least get soft.
This is why I'm working on a silicone mat because this way if it does melt it's not
going to stick to the mat and as it cools I can easily peel it back off again.
Now when you lift these up, as I say absolutely beautiful, delicate florals but we are not
finished there.
We've still got some additional detail to add into each of these petals so I've just
zoomed into this next bit a little because this bit is where we add in that beautiful
detail that's a little bit harder to see from a distance.
Once these have completely cooled and you can choose which is your back, which is your
front, as you can see you can see the colour through both, we're going to start just laying
some folds into each of the petals and you want to do this from the centre out.
So just folding, cracking, creasing, scrunching even and you'll find you're actually cracking
open that clear embossing and you're revealing kind of the white paper underneath almost.
If I just squeeze this one as you can see there we've now got some lovely veins coming
through these petals.
So just work your way through each of the petals on each of the layers just in the same
technique, round and round, you do want to be very careful when you're doing this because
this is a very delicate material, there is the tendency for it to tear if you're a little
bit harsh with it so just do it gently, you don't need to apply a lot of pressure to create
this cracking.
Once you've been round one entire flower you can go ahead and do the rest of the layers.
Now one of the bonuses of this technique as well is if you're not keen on the amount of
cracking and creasing that you've done you can take your heat gun back to that flower,
re-melt the embossing powder and start all over again with very little in the way of
damage done to the petals.
So now I'm going to layer my petals up so I'm just going to use a hot glue gun because
I know this is clear and it will stick to the heat embossing so a small dab there, stagger
my petals and just press down in the centre like so and then the same for these ones too.
Now while that glue is drying I'm just going to lift up my petals and shape them but you
can make them a lot more flat if you're worried about something like postage for example.
Now for the centre of the flower my favourite thing to do is use some tiny beads of any
colour, I'm going to use black and put a glue dot onto a silicone mat so this needs
to be as large as you want the centre of your flower to be and then I'm going to pour over
while the glue's wet these beads and just leave that for a moment or two for that glue
to completely dry.
Once the glue dot has dried the beads will be stuck to it so you can lift it off the
sheet, put a tiny little bit more hot glue onto the reverse and press that down in the
centre of your flower.
And there we've got a really beautiful textured glass-like flower that you can put onto absolutely
any project.
This is simply made from copy paper, some colouring pens but you could also use something
like blending ink as well and whatever centre of the flower you like.
I've then put some die-cut leaves behind on this particular project but again you could
even do your leaves with the vellum-like appearance using copy paper if you wanted.
I hope you enjoyed this tutorial, don't forget of course to like and subscribe and leave
me a comment and let me know what you think of this technique and if you'll be trying it out.
Take care everybody, I'll see you again soon.