How Will A Plasma Globe REACT In Water?

Terrific Physics
40 followers
Well, this one reacts to everything.
In today's video, we're going to see what happens
if we take a plasma ball and turn it on underwater.
If you've never seen these plasma globes,
they're pretty fun.
It's basically a tiny Tesla coil inside of a glass bulb.
Really, a funny shape of glass bulb
that specifically goes right over the Tesla coil.
You add your hand as a path of electricity,
and all those little tendrils move toward it.
Here's the basic idea.
We've got a couple different sizes of plasma balls,
a fun little lamp toy,
and we're going to play around with them.
I want to see what happens
if we play around with them in a few ways.
What happens if we put them underwater,
put them near foil?
Can we use them to start a fire?
Are magnets going to do anything to them?
We might have to break one open as well.
Callie was telling me that they're usually full of neon,
and maybe a slight mix of some of the other noble gases.
Xenon, krypton, and argon are the other ones
that you can sometimes see in there.
Those are some of the noble gases.
That would be the elements that show up
on the far right side of the periodic table.
They're gases that are not very reactive,
because their outer valence shell is perfectly full,
which means they don't want to give away,
or take any new electrons.
So they're very unreactive to other elements,
but they are fairly reactive
to the right kind of electric exposure,
which is why you hear something called a neon sign.
That's because they fill glass tubes with neon gas,
and then run electricity through it,
and it gives you this very particular orangey pink color,
which you can see really nicely.
This might also be neon.
It might be one of the other colors,
but the different gases all glow different colors.
That's what they've got inside, and probably not much.
It might be a low pressure system as well.
It's set to a near atmospheric pressure.
Okay, so not very low.
So today, we've got all of these,
and we want to try some fun experiments with them.
Grant's done some experiments with these.
He had a giant one.
I think he did some fun experiments with that,
and then he smashed it with a hammer.
So Nate's first idea was to put one in water,
and that sounds really cool.
Put the glass in the water.
Just the glass.
Well, it certainly likes to go to the glass.
Now, I should say we are using just tap water here.
This is not distilled or anything.
They're traveling differently now.
The lines in that one are traveling much slower
than the ones in this one.
They're slower and thicker lines.
They're following the drops of water.
Like they can't decide where to go.
Also, new fun trick.
Oh, yeah.
It's like leaving a little trail of pink behind.
It follows your hand now.
Water is allowing that current to stay basically.
Before we look at the big ones,
let's talk about the tiny ones for a second.
These little ones come apart really easily.
So this tube, just so you know, is still completely sealed.
But in here, you have what's basically steel wool.
I think it's just a bunch of metal mesh,
and then I think some kind of metal has been applied
to the glass itself down at the end.
Oh, it is.
It's a baby Tesla.
Zap, zap, zap.
That's getting my finger real nice.
Yeah, but now you can see my skin smoking.
Good.
That hurts.
So I want to do it a lot.
I did lick the desktop Tesla coil once.
Don't do that.
There we go.
This way, it doesn't hurt me.
That's a little arc-y boy.
Actually, right before it forms the arc,
a very small dimple appears in the water.
Now, go ahead and pull it out.
You see that?
It's sucking everything towards it, and shooting it down.
Okay.
Oh, there we go.
Yeah.
Oh, that one looks like it went up.
It's pulling like dust particles towards it,
and then shooting them down into the water.
Let me add a little bit of cinnamon for you.
Wow.
Driving it down.
So when you put the Tesla coil into that glass ball,
that's got all of those noble gases,
it actually sort of gives those electrons a path to follow,
which is that tentacle that you see
that's constantly moving.
I can't help but wonder if that's what we're seeing,
is sort of that line of electrons
without the big glass ball and noble gases.
Very fun little accidental discovery.
Oh, before I put that on,
let's pull out some of the metal shavings and take a look.
Is it just one piece of filament?
Okay, so it is like...
It's like a super coarse grit steel wool.
I think that helps the electrical connection
and be in full contact with all of that in there.
I wanted to see what result we get with the larger one.
Okay, go for it.
Now, I'm curious if like...
Yes.
Oh, that's so pretty.
The whole thing's pink.
It's actually behaving pretty much normally.
Yeah.
What happens if I put my finger under the water with it?
Try it.
Doesn't really care.
It does.
It's like, I can't find anything right now.
Your finger isn't more interesting
than the water around it.
It's trying to just find...
Yeah, find the water.
And it's coated in cinnamon.
The aluminum conducts electricity better than the finger.
But if it's just the sheet of aluminum,
it doesn't have anywhere to go.
This is looking for a path to travel.
But if you touch the aluminum,
as Cal just demonstrated...
I didn't know.
It has a direction.
And look, I can even just, if I get close to it,
so I'm not touching it yet,
but you can see that one of the tendrils
like focuses quite a bit more.
Yep.
You know, not there.
I mean, some of the tendrils are still pointing at it,
and sort of staying to it,
but they're not really going anywhere.
The aluminum can't absorb much charge.
But then, if you actually touch the foil,
it will jump,
and you saw how it was making an arc to the water.
That can also happen to your finger,
or if you don't want it to zap your finger and hurt,
you can hold another piece.
Our camera guy's monitor is having a little bit
of trouble with this right now.
His monitor does not like the electromagnetic something.
Oh.
Oh, wow.
Okay.
Did it die?
Oh, no.
Mark, did we break your monitor?
We might have broken it.
What the heck?
Mark, I'm so sorry.
Try turning it off and back on again.
We're good.
Oh, sweet.
All right, let's not do that again.
Let's do it again.
Let's not break the monitor again.
All right, we can try and burn some of this.
Of course we are.
Oh.
Keep it flat, and just have it in contact with it,
and I'm going to see if I can burn right through the paper.
What you drawing?
Are you an actual fire?
When you had the flat of it,
you had actually quite a bit going there.
Neat.
Fun tricks with a plasma globe.
Want to put an entire one under the water and turn it on?
Sure.
Start with this guy.
I guess risk of shock is only as much as three,
or four batteries.
Battery housing, I think, is not waterproof.
So the batteries, I think, are going to get surrounded by water.
Cavity is now filling with water.
I'm actually surprised it's still doing anything.
Yeah.
Because those batteries have just got to be swimming at this point.
Surprisingly, continues to function despite having being submerged.
Turn that off for a second.
Okay, while you're prepping that,
I want to see if magnets do anything to them.
So I've got a magnet here.
So far, at this distance, the field seems unaffected.
Okay, here it is, but then it's also conductive,
and I'm touching it.
So let's see if I'm just gonna set this and take my hand away.
It's about like the foil.
There's a tiny, tiny bit that's gathering right around it.
But until I get my hand there...
Oh, there's a metal filings on the outside of this magnet,
and the plasma is igniting them.
Nate, check this one out.
Oh, well, it's certainly doing something with the power supply,
or the path of electricity.
Yeah.
So my plan won't work quite the same.
But we can still push this down into the water.
So once it's surrounded, it just connects...
Well, it was just connecting to the neck down at the bottom.
It started to move back to the rest of the globe a little bit.
Well, I want to change things up a little bit,
and just to see if it makes any difference,
I want to change the conductivity of the water.
So I'm going to add a lot of salt.
Now, what do you think will happen?
Not a lot.
I don't think it's actually going to change too much.
Okay.
But I just had to test
if having it be more conductive will do anything or not.
Start.
Plasma ball.
I'm just going to bring this near the water.
Doesn't look like it's changing.
I think it's about the same.
I think it might be sending a little bit more charge
down into it.
I can see that.
Yeah.
That is cool though.
With the salt water on the glass,
if I touch any part of it,
like larger portions of it light up pink.
That is really cool.
It's not just trailing after your finger.
It's like you've made tie-dye.
So I think it's working the same.
The only difference is
that the cinnamon no longer sinks as well,
because the salinity of the water makes it
so the cinnamon is more buoyant in it.
So now, I'm trying to drive something that floats
down into the water instead of something that sinks.
That one little blob is just acting weird.
So about the same.
Pretty much the same reaction with salt water and tap water.
Tap water may already have enough in it
that it just is going to work like that.
All right.
Just seeing what happens if I pour some vapor down on it.
It's neat.
I don't think it's doing much.
It looks like it could make a cool photo maybe,
a little smoking plasma ball.
But let's go for actual liquid nitrogen liquid.
It's not even registering.
Does not seem to do anything.
Well...
Okay.
Nothing.
So if we want a more likely breaking of the glass,
I can just take this and turn upside down,
so it's in contact with the liquid nitrogen.
I'll leave that one up to you.
Let's try it.
And of course,
it doesn't want to stay creating a perfect seal,
because it's pressurized.
Is it tempered glass?
No, just the shape.
Well, I'm going to say
that being cold does not much affect a plasma ball.
You froze it.
I did.
Oh, that's cool though.
It makes your fingerprints go spiky.
Look at that.
But it looks like little sun rays.
Well, let's break one.
Okay.
3, 2, 1.
Neat.
I can hear it trying to do things.
It's still kind of going.
This one's like frozen in place now.
Like, because of the water droplets,
it like only wants to go to those,
and so the little Medusa fibers aren't going anywhere.
They're just like, these are my spots.
These are currently set on sound mode,
which makes them react to sound.
This one's more sensitive,
and they seem to react to lower notes better.
Guys, despite our best efforts,
today's experiments were surprisingly gentle.
We still have two larger working plasma globes.
Is there anything else you want to see us do with these?
Let us know in the comments below.
Tell us to get bigger ones,
because that would be really fun,
and then tell me some way I can involve my torch.
Guys, that's not all.
We've always got more to see.
Click the box at the top to check out our most recent video,
and we'll see you in the next one.
Talk to you then.
