Painting with light

Light Art
68 followers
Our key light is 60C, and we're double diffusing with this, I don't know what this is called, frost or something.
We're creating some key light. With just a key light, our background is a little bit too dark.
So we're using the 500C, 1200B outside the window, you know, giving this light in the background.
So this is 1200B, 500C more.
To wrap this light around a little bit more, so that the shadow side doesn't just fall into the dark completely,
we're using the 240C-L.
So this is our key light, again, 240C-L.
I intentionally didn't double diffuse this part to give our subject a little bit of specular,
a little bit of hard light hitting this side of his face, but then I'm trying to wrap this light around.
I want that light to be a little softer than this light.
So it's like a little hard light hitting this side, and then it's getting softer as it comes around.
To bring up the overall exposure, we are bouncing the 60C off of this white thingy.
And over here, we're using 500C to, you know, highlight the background.
And then outside, there's a light called Dyno.
This is our key light, 500C.
I'm bouncing the light off of this white, whatever this is called, and then, you know, double diffusing
with another white thingy that's creating fairly soft key light.
We have this ambient light coming from this window. This is all natural light.
This is, you know, wrapping around.
So without the ambient light, it's going to be too contrasting, just light and dark.
But because we have this ambient light, it's just wrapping around.
And we're using this negative fill to cut the light spill to the background.
What we're doing right now is trying to create eye lights or catch lights.
This is a pretty harsh light, so I don't want this light to directly affect our subject's face.
So we're trying to cut the light with this bundle.
I'm worried about this crack in the jacket.
So I'm going to raise this and fix the crack.
If there's a person standing here, I'm going to use this as a negative fill.
And then I'm just going to let the negative fill carry the light.
So that's acting like ambient light. That's creating our ambient light or feel light.
It's coming through this curtain, which is making this light a little softer.
And it's kind of pointing to the floor a little bit to bounce it off the floor.
That's our key light.
I don't know how many diffusion it's going through.
It's coming through that and we're bouncing the light off of this, again, white thingy.
And another layer of diffusion.
So that's triple diffusion.
And we have another one over here.
And finally, we've got this.
And then we have this negative fill to make the shadow deeper.
And we have this practical.
So all the lights are set to around like 4,000.
In camera, it's 5,000.
And this is probably around like 27.
Yeah, that's it.
It's a very soft key light and feel light.
Practical negative fill.
The 1200B outside the window, that's our key light.
And we're basically backlighting our subject, giving him the edge light.
We're using this tube light with color temperature set to 7,500 Kelvin.
And the 1200B is set to like 4,000 Kelvin, I think.
So that's giving a little bit of contrast, blue and orange.
This is also giving a bit of brightness on the shadow side as well.
Camera speed.
Every shot in the film was lit with lights from Nanlite and Nanlux.
I purchased a couple of lights from them earlier this year,
including four power tubes, which I use all the time.
In fact, I'm using them right now as my key and fill and edge light.
We had some of the bigger lights on set,
like the 1200Bs and 900Cs and a couple of Dynos as well.
And they were great.
But what impressed me the most was this Nanlite 500C.
This is a full color RGBW LED spotlight.
Now, this is the brightest Nanlite fixture available with RGB color.
This 500 watt light is pretty damn powerful
and has a CCT range from 2,700 Kelvin up to 7,500 Kelvin.
And also green to magenta adjustment, gel presets,
where you can control red, green, blue and white separately.
And that means no need for color zones when using these lights in most cases,
which will save you a lot of time when setting up your lights,
especially for small crews or one man band filmmakers.
You can fine tune the dimming from 0 to 100% in 0.1% increments,
which allows you to be very precise and get the exact brightness you want.
It has all the great built-in lighting effects that Nanlite offers as well,
which I actually use them quite often more than I was thinking,
especially the fire effect or the candle effect.
And you can dial in specific settings to get your desired look, which is great.
And the light is well built.
It feels really solid and well constructed as well.
A power supply is included to run on a standard AC outlet,
but you can also run these with V-mount batteries with optional accessories.
So you can use them out in the field without having to carry around things like,
you know, power stations or generators, which is awesome.
The Nanlite 500C is a powerful, colourful, versatile and accurate light.
So if you're looking for a powerful light on a budget,
I recommend checking these out.
I put a link down below.
So yeah, that's it for today and I'll see you guys in the next one.
Bye.
