The Clever Reason Smart Gardeners Chop Their Plants

Green Happiness
146 followers
Chopping back your indoor plant can seem like a daunting task that you just never want to
do for fear of killing it, but it's actually one of the best things you can do.
One of the most important things I have learned since growing my collection to well over 200
is that it's nearly impossible to kill them from just pruning.
I've pruned all sorts of plants in all sorts of different ways, from the light short back
and sides to the more drastic beheading, and in pretty much all cases, not only have they
survived but thrived.
But this isn't the only reason smart gardeners are chopping their plants back.
Not only is it great for your green little guy, it's also a seriously thrifty way to
increase the number of plants in your home completely for free.
There'll be no more traipsing to your local garden centre to spend hundreds or yet more.
If you've ever hesitated before making that first snip, you're not alone.
There's always that tiny voice saying, what if it doesn't grow back?
Or what if I made the wrong cut?
But here's the truth, plants are way more resilient than we give them credit for.
As long as you're using clean tools and cutting in the right place, your plant will recover
and in most cases will come back even stronger.
So let me show you some evidence of how even the hardest prune can transform your plant.
Meet Frank, my Ficus Elastica Tineci.
This guy is the variegated brother of the green rubber plant.
These guys tend to grow a single lanky stem forever, unless we play mother nature and
intervene with our choppers, and that's exactly what I did, twice.
The first cut was here, basically chopping the plant in two.
That may sound a little drastic but they always grow back and the result was turning one stem
into two.
On most plants, whenever we cut a stem, activates a couple of nodes and you end up with two.
It's a great way to branch them out into a more tree-like structure, which is what these
guys are in the wild, big old trees.
But why stop there I thought to myself.
So I didn't.
These two new stems got the cutting back treatment once they were large enough and now I have
five stems on the go.
Basically you can keep going with this until your little guy has more stems than he knows
what to do with.
But what about the top part that got cut off initially?
Well that didn't end up in the SMP bin, no, that turned into this guy.
Yep, meet Robert, the oldest son of Frank.
I'll show you how I achieved this in a sec, but you've probably noticed already that Robert
has received the same treatment as Frank.
Lots of prunes to branch him out just like his daddy.
Now to show you the consequences of all this pruning malarkey, let me introduce you to
Rosie, the Ficus Elastica Ruby.
As you can see, I've only just pruned her, so it's the ideal time to show you what's
going on.
First, you can just see the beginning of the new stem starting to emerge just below where
I made the cut.
These little bumps can actually be found all along the stem, but they only awaken when
we intervene with our pruners.
My plan, once these grow out to be about 15cm or so in length, is to cut again to get yet
more branches.
Now the top piece I cut off, I put that in a glass of water and as you can see, the first
roots are just starting to emerge.
This is one of the simplest ways we propagate our plants, pop the cutting in a glass of
water in a nice bright spot and wait patiently as roots start to develop.
It normally takes a few weeks depending on the plant.
Ficus are one of the slower ones to root.
When they're a good couple of inches long, we pot them on into soil and job done.
So that's one type of plant that I've shown that could be pruned successfully.
What about others?
Well, the plant world is your oyster.
Basically, anything with a stem can be pruned and propagated in this way.
I cut back this Croton here a few months ago and it looks like I've been blessed with
three new stems.
I successfully propagated the top piece, although it did take a very long time and recently
potted on that bad boy into his new home.
So not only do I have a better plant with lots more stems, but I've also got a brand
new free one.
If you're a subscriber to the channel, then you'll have seen me savagely hack up Moni
the Monstera in my old house because she was getting a bit unruly.
I couldn't keep all the cuttings because I just don't have the space, but these two fellas
are cuttings that I did keep for myself and they're growing out perfectly.
The Coleus is another example, but on steroids.
A plant like this would continue to grow with this single stem until it became a lanky mess.
This is actually a cutting I recently took from this guy.
Just look how many stems Daddy Coleus has got.
This is all because he's such a rapid grower that I constantly need to prune back.
So I've controlled his growth and made him extra bushy.
Come summer, he'll look like a real stallion, believe me.
J plants are another that are just ripe for pruning and propagating and the interesting
thing about these guys is that you can grow brand new plants from just the leaves.
Simply lay a leaf onto some moist soil and wait for roots and then new stems to appear.
It will take ages, but you really can grow tons of jades with just a single stem you cut off.
And propagating from leaves doesn't have to stop there.
A recent experiment I did was to take a leaf from my Rex Begonia, make some cuts along
the vein and lay it onto some moist soil in a Tupperware box so that I could keep the
humidity in.
Well, this is the result a few weeks later.
New plantlets are growing where I made the cuts.
These just need to be plucked out and potted on into their new homes and I'll have a bunch
of new begonias to either keep or give away to friends.
Now obviously not all plants grow stems.
Califare for example grow leaves from bulbs in the soil.
So how do we get these to grow nice and bushy?
Well, there isn't really a hack for this apart from giving them great indirect light so that
they produce lots of leaves.
The only real pruning we would do is to cut off damaged or diseased leaves or to thin
them out if they become a bit unruly.
And if we do want to propagate them, we simply divide them at the root ball and put them
on individually to grow on in a nice bright spot.
Now that we know the what's and the why's, let me show you the full process from start
to finish so that you know exactly where to cut and why and all the rest.
Let's use this Pothos Devil's Ivy as my next victim, I mean subject.
This guy has a couple of stems that I'm not wanting to attach to this moss pole.
This one in particular is veering off to the side making my living room look untidy.
I know making the decision to cut a large stem like this off your beloved plant can
fill you with dread but trust me, after a few weeks of pruning you'll not think twice
anymore and the plant probably wants you to do it.
Look, Mr Pothos is practically begging me.
So all I'm going to do is to pick a spot near the moss pole so that the new stem will hopefully
start growing onto it.
So a cut right here will do the trick.
Make sure to cut just below a leaf so that we still have the node on the stem.
The node is just the line on the stem where the leaf grows.
This is always where the rooting hormones are.
So this leaves me with a stem that has 5 leaves on.
And this isn't this Pothos' first rodeo.
Check out this stem where I made a previous cut and look at the stem that grew in its
place.
Proof that all this cutting is absolutely no issue for our guy.
And look how it's not attached to the pole.
I dunno, I should have tied it on I guess.
So our piece that we cut off with 5 leaves.
We could simply stick the piece as a whole into a glass of water and let the rooting
magic happen but this would be a fool's errand for a couple of reasons.
First there's probably too much leaf material here for the cutting to root quickly if the
leaf at all.
This cutting has zero roots to support the upkeep of these leaves.
They're basically drawing too much energy from the stem and rooting is massively slowed
down.
Ideally you just want 1 or 2 leaves.
This applies to cuttings of pretty much any plant.
And second, this is a massive waste of potential.
Instead of 1 new plant we've actually got 5 new plants here.
All we do is cut in between each leaf, trimming back the stem a little on both sides.
You see our cuttings only need this amount of stem to grow roots successfully.
Try not to cut too close to the node or cut it off entirely.
This is where the roots will grow from and then eventually a new stem.
And to speed up the rooting process even further, you could even cut the leaf in half.
And don't worry too much about this.
This leaf is not a keeper in the long run, it'll only be useful during rooting.
Once a new stem grows, this leaf will die off and reducing the leaf size minimises the
work the stem has to do to grow roots.
Only a small amount of leaf surface area is needed to photosynthesise.
Now that we have our cuttings prepped, we need to think about where we're going to put
them.
The most basic option is to simply pop them into some soil and forget about them.
But this has advantages and disadvantages.
First, there's no messing around.
The cutting will root in the pot of soil and a new stem will grow.
Nothing further will need to be done, it's dead simple.
But I've found cuttings tend to root slower in soil and sometimes they fail entirely.
I'm not sure why, but it's something I've noticed.
This is a pot of various pothos and philodendron cuttings that were added straight into soil
and for some reason these ones haven't taken.
Plus, with soil there's no option to peak on progress, we're in the dark as to whether
progress has been made until we see the first stem, which could be weeks or months further
down the road.
So the two options I like are simply a glass of water or a tote box filled with damp perlite.
With both these options we can track progress and the success rate seems to be a bit higher.
Today I'm going to add these to a glass of water and then pop them under my Santee growlights.
Cuttings root fantastically under growlights, better than the big ball of plasma in the
sky if you ask me.
Keep the lights on for 12 hours a day, during the day and not night and roots will appear
in about 4 weeks.
The sweaty tote box has simply been filled about a quarter of the way up with perlite,
moistened and then the cuttings added.
I found this to be the quickest and most foolproof method but you do have to put up with, well,
this.
Mr Sheffield isn't a fan let me tell you.
Now you're probably wondering what the best time of year to do this is right?
Spring and Summer surely?
Well not necessarily, I propagate all year round and get results even in the deepest
darkest winter.
As long as you're not suffering in a wickedly cold house and there is some daylight, or
better yet a growlight, they will root.
So, this process can more or less be followed for any plant with a stem, it's how I've got
so many monsteras in my home.
In fact, I reckon a good 30% of my plants have come from propagation.
If you're interested in going a little bit deeper into this, check out my online propagation
workshop that is linked in the description to this video, I show you the full process
of propagating a variety of plants and then how to pot them on like a pro, all in an easily
digestible format.
And for your next viewing pleasure, check out this video next and I'll see you there.
