A man built a recreation center for his wife

Hello friends I haven't seen everything I want to tell you show how we built a swimming pool on our site the first thing you need to choose a place that will be well lit and will almost always be in the Sun that is during the day after that you need to choose soil to speed up the process I used the motor cultivator that is with its help I plowed the ground and then loaded it with a shovel into a cart and took it out at the same time he leveled the area that is this land that I chose from under the foundations of the swimming pool I once threw it on the side in order to level it in the next stage after we have already chosen the right amount of land we need to make a solid foundation for the pool this is done using geotextiles that is first you need to spread the geotextile and then sprinkle sand on top after we fill everything with sand it needs to be leveled very well since our area was slightly sloped and needed to be leveled with this in mind I made a wooden rake for this it was much easier to level with them then there was the question of thrombosis to do this we had to buy a hand roller like this that fills with water the size of the barrel underwater is 60 L using it it was very convenient to level the sand and as you can see the result was very good next I had to finalize all this with manual rules and then pour water so that the sand was compacted as much as possible after the foundation was leveled we installed insulation this is done so that after we put the pool and fill it with water the heat of the water does not go into the ground due to this the pool will keep warm water much longer we insulate it using PE panel these are foil panels they have two sides of foil thickness 50 mm when the foundation is ready for the pool you can stop the pool itself that is for the convenience of assembling the frame we did it together after we put the frame together we lightly filled it with water so we wouldn't blow it away in the wind the next step is the the installation of the Pavilion itself The Pavilion is assembled as a Constructor initially you need to assemble the foundation the foundation we made from a wooden beam a very important point is that the beam needs to be pre- soaked some kind of tree protective agent so that it retains its appearance longer the next moment the frame itself is assembled and covered with polycarbonate polycarbonate we espcially chose a two-colored lower part we have a transparent upper part we have a turquoise color this is done so that inside the pool also seems such a small effect of the sea our Pavilion is also equipped eight windows and two large entrance swing gates that is many will ask the question will it not be too hot actually no after using the Pavilion and the windows we hardly use one gate enough which we open we hardly touch two gates the advantage of such a pavilion and swimming pool in it is that you do not depend on the weather at all that is Sun rain snow wind and hail it doesn't matter it's always comfortable to swim in the Pavilion and most importantly if you want the water to heat up faster in the pool you just close all the doors and in seok and the sun will do its job quite quickly and one of the most important advantages of such a pool is that you absolutely do not depend on the weather and our swimming season now begins in April and ends in October yes in the first and last months of the swimming season we heat the water with a special stove for heating pools but all the rest of the time the water calmly keeps its temperature we did not regret the installation of our pool for a second indeed it did not cost us very much this is one of the most budget options to install a swimming pool on your site but for today I still have more useful information you can find on my channel subscribe