What's inside the Statue of Liberty_

Modern Arch
65 followers
4 Video Views·Mar 14, 2025
🕒 Timestamp:
0:00 - Introduction
0:24 - Geography
1:37 - History and Facts
2:44 - Construction
5:31 - Renovation
5:48 - Exterior Tour
7:17 - Inside the Pedestal Tour
8:40 - Inside the Statue Tour
Comments are disabled for this video.
In this video, let's take a close look at the inside of the Statue of Liberty.
We'll take a quick look at the history, how the statue was built, and where you can go on the
inside. The statue's official name is Liberty Enlightening the World, but today it's known
as the Statue of Liberty. It was a gift to the United States from the people of France in the
If we zoom in on Europe, right here is France. And across the ocean over here is the United States.
The Statue of Liberty is right here on the east coast. If we zoom in here,
you can see the state of New York and the state of New Jersey. Right in between the
two states is the Upper Bay, often called the New York Harbor. The Statue of Liberty is here,
on Liberty Island. And if we zoom out again, you can see Manhattan with all of its famous
New York buildings. Here's Governor's Island, another popular tourist destination. And right
here is Ellis Island, where many immigrants entered the United States from 1892 to 1954.
As boats sailed into the harbor, the Statue of Liberty would be one of the first views that
immigrants would see coming to the United States. The Statue of Liberty has come to be known as a
of freedom. In her right hand, she holds a torch. And in her left hand, she holds a tablet that has
the date of the Declaration of Independence in Roman numerals. One thing you can't see from the
ground is a broken shackle and chain. This is meant to symbolize the end of slavery. The statue
is 46 meters tall. If you count from the ground up, it's 93 meters tall. That's about as tall as
a 20-story building. Here's the size of a person in comparison to the statue's big toe. When it
was complete in 1886, it was the tallest statue in the world. But that title is now held by the
Statue of Unity in India. The Statue of Liberty is made up of copper. That's right, it was originally
the color of a penny. It only took about 20 years for the air and rain to slowly oxidize the metal
and turn it the color green. The copper metal has a thickness of only 2.4 millimeters. That's less
than the thickness of two American pennies. The statue was built in pieces and a statue this big
takes a lot of planning. The statue was designed by the French sculptor Frédéric-Auguste Bortoldi.
First, he made the initial sculpture out of clay. This was only 1.2 meters high.
The average adult is a little taller than this. Next, a larger version would be twice the size
and would be made out of plaster. The next version would be much bigger. This is one-fourth the size
of the full statue. At each stage of enlargement, Bortoldi would be able to further perfect the
details of the statue. For the full-size version, it had to be built in pieces so it would fit inside
the workshop. At one point, to raise money, the finished version of the statue's head was displayed
in France and the right arm and torch was displayed in the United States. Visitors could pay money to
climb to the top of each of these. So how do we get from the plaster model of the statue to the
finished copper version? Well, the final version was made out of sheets of copper. They used a method
called repousse. Here's how this works. They would take pieces of the full-size plaster model of the
statue and build a wooden mold right up next to it. This would then be used to shape the pieces
of copper. They would hammer them in place until they would fit the shape of the wooden mold.
After that, the copper was supported on the inside with iron straps. Now, we have a completed piece
of the Statue of Liberty. By themselves, these pieces would never be able to hold their own weight.
It needs a supporting structure and this was designed by Gustave Eiffel. His name might sound
familiar to you. Just a few years later, he would go on to help build the Eiffel Tower in Paris, France.
The Statue of Liberty has an iron pylon at the very center. You can think of this as the spine
to the Statue of Liberty. Then, smaller support beams were built around this to support the copper
pieces of the statue. The structure would allow the statue to sway in the wind by up to 12
centimeters at the very top. This was all first built in Paris, France and it took almost 10 years
to build. Then, once completed, it was taken apart into 350 different pieces. All of this was shipped
across the ocean to the United States. It took another four months to reassemble the statue on
top of the pedestal. The French paid for the statue itself, but the United States paid for
the pedestal. When the statue was finished in 1886, this was called Bedloe's Island, but today we call
it Liberty Island. The Statue of Liberty has received a few renovations over the years.
One of these renovations was the torch. It had been damaged and was leaking rainwater.
It was replaced in the 1980s. The original torch is still on display. I'll show you where later in
the video. To get to Liberty Island, you have to take the ferry, unless you're a really good swimmer,
but I don't recommend that. A ferry leaves from two places, Liberty State Park in New Jersey
and the Battery on the southern tip of Manhattan. It takes about 15 minutes to get to Liberty Island.
The island has a land area of just under 15 acres. This is Flagpole Plaza, the Information Center,
Cafe and Bookstore, and the Gift Shop. This is the Statue of Liberty Museum.
This was opened in 2019, so it's still fairly new. We head down this way to get to the statue.
There's plenty of areas to walk around here. That way, you can see the statue up close from any
angle you choose. The base of the statue looks like a star shape. This is the remnants of an
old military base called Fort Wood. It was used in the early 1800s, but now it's the base of
the Statue of Liberty. This part is called the pedestal. When you buy a pedestal ticket, you can
go anywhere on top of the base of the statue and all the way up to the observation deck. If you
want to go inside the statue, you'll need to buy a ticket to go all the way up to the crown. It's a
little harder to get a hold of one of these tickets. You usually have to reserve a few weeks or
even months in advance. However, since the pandemic, you can still go to the island, but the public
isn't allowed into any part of the pedestal or statue. Hopefully, that'll change soon. To get to
the inside of the statue, we'll enter from here. These doors are called the centennial doors.
Remember that you have to have a pedestal ticket to go inside. Enter here to get into the pedestal
lobby. The original torch to the Statue of Liberty used to be right here in the center.
When the museum opened in 2019, the torch was moved over there. So now the pedestal lobby is
wide open again. The old museum used to be here in this area, but now most everything has been moved
over to the new museum. Now it's time to make our way to the top of the pedestal. You've got two
options. The elevator is here or the stairs are here. There are 192 steps to the top of the pedestal.
Inside here, you can see the stairs to go up and the stairs to climb back down on the other side.
There are seven floors inside the pedestal. So this is 1P, 2P, and all the way up to 7P,
the very top. At level 3P, you can go outside and view the surrounding areas. And at level 6P is
the official observation deck. You can go outside either here or here. Once outside, you'll get a
good 360 degree view of anywhere in the harbor. If you have a ticket to go up to the crown, then
head up to level 7P. This is where you start your climb up to the top of the statue.
This is called the double helix stairway. One way up and the other way to come back down.
These stairs fit right in the middle of the support structure. There's not a lot of room on
here and I hope you're not afraid of heights. If you get tired, there are a few resting places.
And just in case, there's also an emergency elevator inside of the statue, not for regular
public use. It carries only three people and can stop at a few of the platforms along the spiral
stairway. During your climb, you'll be able to see the metal framework that holds up the statue.
You can even see the individual ripples of the statue's dress. And finally, we reach the top of
the spiral stairs. This area is called the crown. Only a limited number of people can be up here at
once. It's a great place to look out of the windows onto the harbor. There's a total of 25
windows on the crown. On the inside, you can even see the individual patterns of the statue's hair.
On the back, you'll also notice some lights that will be turned on at night.
Once you are finished up here, you can start making your way down the other side of the double
helix stairway. A lot of people ask about the torch. In 1916, there was an explosion in New York
Harbor that damaged the statue. Since then, they've never reopened the torch for public access.
However, maintenance workers still have to occasionally climb the torch.
Right at the statue's neck, you can see the gate that gives access to the arm.
Once through here, there's a long ladder up the arm. It's not the easiest climb. Then onto another
ladder, and at the very top, there's a tiny door that opens up to the fresh air outside.
So hopefully, COVID restrictions will continue to ease up,
and visits will once again be allowed inside of the statue. We'll see you next time.
