Advanced Brush Settings in Lightroom and Photoshop

Photoshop Effects World
12 followers
#photoshop, #photoshoptutorial, #channelselection, #adobephotoshop, #photoshoptip #photoshoptutorials #photoshopeffects #photoshoplearning #DigitalTexture #DesignTutorial#CreativeEffects#TextureDesign#PhotoshopTextures#mockup
In this tutorial, we are going to take a look at how to turn this photo into this photo. And we
are mainly going to use the brushes inside of Lightroom and in Photoshop Camera Raw to do it.
Well, folks, my name is Matt Kloskowski. I want to welcome you to this tutorial. This is a really
fun one for me because I use brushes on so many of my photos. It's such an important part of my
workflow. And there's a couple of settings, whether it's Lightroom or Photoshop's Camera Raw,
there's a couple of settings, specifically density and flow that can make such a big difference.
And I see so many questions on it because in some ways it's kind of, it's kind of easy to
miss what they do. And then sometimes when you see what they do, it almost looks like they do
the same thing, but they're actually very different. Okay. So we're going to take a
look at that. You can, you can actually download this file. If you just check the link in the
description, you can go grab it. If you want to follow along and let's go ahead and get started
So we're going to start off. I'm going to hit the reset button right here inside of Lightroom,
and we'll start off. I'll show you the quick camera settings. If you're interested,
ISO 800, 18 millimeters, F11, six seconds. So, you know, nice little waterfall shot. This is a
waterfall just outside of Portland, Oregon. And what we're going to do is head over here to the
basic panel, probably warm it up a little bit, just add some, some overall warmth to it. Pull
back on my, my highlights a little bit, open up my shadows a bit. I actually think contrast between
whites and blacks looks fine. Probably go in and throw a little bit of sharpening on this one,
lots of details so I can crank it up to almost a hundred percent. And, and then come down here
to lens corrections. If I enable the profile corrections, it'll just let me, it'll let me
give it a little bit of that edge distortion and vignetting that you see in there sometimes.
All right, now let's get to the fun stuff. We're going to go choose the adjustment brush here
inside of Lightroom. And if you were to hop over to Photoshop, you were to choose the adjustment
brush in the top left corner, you will see the settings are exactly the same. They are the same
tool, works exactly the same. There's no differences between the two. So if you're using Photoshop,
settings are the same. In fact, if you're in Photoshop or maybe a program like Affinity
Photo, you might even find settings like flow for some of your brushes. So if you learn what it does
here, you'll actually understand what it does there as well. Okay, let's head back over here
at Lightroom. Let's take care of the, let's take care of the big settings here, which is going to
be size and feather. These are, you've probably seen these size, obviously the size of the brush,
big or small. You can use the right and left bracket key to make them bigger or smaller.
And then the feather is how hard the edge is. At a low feather setting, it's a very hard edge.
At a higher feather setting, it's a very soft edge. You can see the difference between the two.
I didn't change anything, but the feather setting in that example there. So you can see the inner
ring and the outer ring and the further along those, those rings get from each other, the more
that brush is going to feather and, and soften out on the edges there. Okay. So let's reset that.
We're going to start off simple here. I'm going to bring my exposure down
and I can get a fairly large brush and let's just, just brush in that background. That wall
was getting a little bit, getting a little bit bright there. And, and as I go through this,
you know, for me guys, this is, this is the, some of the biggest things that I do to my photo.
Once I get past the technical settings of, you know, just the overall toning and lens corrections
and just the, the techie kind of boring stuff. This is the stuff that brings my photos to life.
I spend most of my time here rather than with the sliders because I can, I can really draw
your attention to things and make the photo come alive. So in this case here, I darkened everything.
I'm going to go down here to erase and I didn't pay too much attention to the waterfall. So I'll
just go over there and just kind of swipe right down. And it's going to brighten that up. It
basically just erases the effect from there. A lot of people ask what the A and B settings do.
They're just brush presets. So you can click here between the two and you don't really set them. It
just remembers, just remembers your last setting. So if, you know, sometimes I have a very feathered
brush for A and a very hard edge brush for B inside of it. Now let's get to, that's probably
a little bit too dark for me. Now let's get to the, let's get to the fun stuff. We're going to
go down here to flow. So what's flow do? Flow to me comes in really handy when, when I want to do
this dodging and burning in the photo. And I want it, I, I want to be very creative with it. Okay.
Because what's going to happen is I'm going to have some areas that are going to be brighter,
darker. And as I'm painting around, I want to be able to control that brightness and darkness of
those areas. So what I can do is start to start to mess with the flow. So let's take a look at
an example here. The first thing I have to do is I have to click on new because I want to add a
whole new adjustment pin for my, my flow here. And I want to brighten things. So I'm going to
exaggerate this. I'm going to crank this up to about three, leave my flow at a hundred percent.
And let's bring the, let's bring the feather way down just so we can see as an example here.
And I'm going to brush. What I just did there is if you were to think of, think of the way flow
works, I set my exposure to plus three, whatever your sliders are. I set my exposure to plus three.
That's the upper limit. That's the cap of, of where this is going to go. And then flow is set
to a hundred. So when I brush, it's a hundred percent of plus three. So let's undo this and
let's bring flow down to 50%. Now, when I brush, it just brushed with 50% of three, whatever that,
whatever that number was. But as I brush more, I've just added the other 50%. And now I can go
in here and I can brush and brush and brush. And it's not going to get any brighter than plus three
plus three is my cap. That's the limit that I have here. Okay. So with flow at 50%, I get two swipes
before I get there. Now let's go ahead. Let's delete that one. Let's bring our flow down to
about 25%. So what's going to happen here? Well, I brush that's 25% of three, whatever number that
would be 75. Then I brush again. That's another 25%. I brush again. It's another 25%. I brush again.
It's another 25%. And now no matter how much I go back and forth, I'm never getting above that
three. It just took me longer to get there with a lower flow number. Okay. So that's what flow does.
Now, how would I use that in real life? Well, in real life, I'd probably give myself an upper cap
here. Give myself a lower flow setting like I have here. And I would brush my left bracket key,
make it a little smaller. I would brush around the rocks that I want to make brighter. Okay.
And then this rock particular, I want it to be brighter. So I'll brush a couple more times over.
I want this rock to get brighter. If I want it to get even brighter, I can brush again.
Okay. Remember I'll never go above 2.5 though, but this lets me at least vary that throughout.
And that's generally what you're going to want to do when you're doing this type of work is
you're going to want to vary it. Now, when you're using, when you're doing this technique,
chances are you're being very creative about it. You're, you know, it's a, it's kind of a very,
it's used the word flow. It's a very flowing process. You're not necessarily being exact.
You're kind of just going where the photo kind of pulls you along and you're being very creative
with it. But that works in these cases for, for what we're using here for flow,
even a little bit down here. Now let's get to density. So I'm going to crank my flow up to
a hundred here and, and let's go ahead and let's put our, let's put our exposure way back up at
three. So density, think of density as opacity. So at a hundred percent opacity at, you know,
what's this about three at a hundred percent opacity. When I, and let's go ahead and click
new, let's get a new adjustment. When I paint, I just painted with a hundred percent of three,
or in this case, I thought I put it at three. Let's put it back. I just painted with a hundred
percent of it. Okay. Delete that. Now let's bring our density down here to 50 and I paint.
I now just painted with 50% of three, which is 1.5. But here's the difference with density
is no matter how many times I go over it, it's not going to change. I can keep going over and
painting over and over and over, and it will not build up to that three. Cause I've set the density
at 50%. It's never going to go higher than 50% of three, which in this case is 1.5. So here's what
begs the question is if you're wondering, that sounds a lot like opacity. And if this were the
case, why wouldn't I just put the exposure at 1.5? Okay. Cause that's all it's doing here.
It's just, it's pulling me back to 1.5. Why wouldn't I just pull the exposure back there?
It's not building, it's not graduating up or anything like that. So why not just put the
density at one or the exposure at 1.5? Here's why. If you're getting into a situation that requires
a little bit more, a little bit more finesse and a little bit, I say finesse and also exact,
a little bit more exact in the nature of what you're painting on.
What you can do here is you can start to vary the density. And what I mean by that is,
as an example, if I were to, if I were to, let's say I wanted to make, let's say I wanted to make
these rocks brighter and I'm going to put my exposure up at 1.0. Let's say I want to make
these rocks brighter. Well, I would paint and I just set everything to plus one exposure.
What about if I want to make this rock a little bit brighter than this rock?
And I want to be a little bit more exact about it. I don't necessarily want to use the flow method
where I can build. I need to, I really need to be a little bit more finite about this.
Well, what would I have to do? I'd have to go to new. I'd have to make a new brush pin
and then I'd have to set it to something and paint over this rock because I can't do it with,
I can't do it with, with any other setting here. So I'd have to create a new brush adjustment and
paint over that rock if I wanted to vary these. And what I realized started happening in my workflow
is that I had these little brush pins all over the place. Okay. Without density, with keeping
density at a hundred, my only choice was to just create new brush pins when I wanted to vary
how much I wanted to paint and be exact about it in certain places.
With density, let's go ahead and delete that. With density, what I can do is I can set a number
and I can go and I can paint and paint. And if I decide I want to make something brighter rather
than click new and make a whole new adjustment brush pin, I can just go over here and maybe pull
my density up a little bit and then paint over here. I basically just increased the opacity of
that brush. If I want to make something even brighter, I can increase the density and then
come down here and paint. All right. I want to still keep with the same brush, but maybe not as
much. Now I can decrease the density and I can go over here and I can paint. So I'm going to delete
that because I don't know that I would paint all that stuff as bright as I was painting it, but
that's the difference. Because what you'll end up with is you'll have one brush pin, but you'll have
varying densities all throughout the image. And you can be a little bit more exact about it than
you can with your flow setting. So in this case, what I would do is crank that setting up. I'd go
over here, maybe brush down here a little bit, brush in there, maybe increase the density a
little bit, brush down here, brush over here a little bit. I'd create one more new adjustment
and I'd reduce the exposure. And I think I would, that's probably a little bit too much there.
Reduce the exposure and I'd come down here and paint a little bit down here at the bottom,
just to darken some of those areas, draw some light throughout the photo there. Okay. Like so.
If you want to see the before and after, there's a little toggle switch right down here. You can
see that's before, that's after. And then overall, I think I might've gone a little bit too bright in
a couple areas. You can always hover over and you can see what you've painted on. So in this case,
maybe I pull that back a little bit. All right. And then when I'm done, if it were me, I'd probably
throw a little bit of a vignette on here. I put a vignette on a lot of my landscape photos just
to tame the edges a little bit. I throw that on there, maybe increase the whites overall,
just a little bit and a little bit more warmth. Want to see the before and after? Let's take a
look here. I'll hit the backslash key. That's before. And that is after. So guys, I hope that
helps out. These were, these are settings. I know they've played people for years and years and
years. Hopefully it helps you out a little bit because they are very useful settings and kind
of understanding where they go, how they're used can really save you a lot of work. Especially
if you're going to go back and reedit your photo and you open it up to that brush,
you don't want to see 25 little brush pins around there. And hopefully this,
these little tricks help keep you from that. Guys, thanks for watching. Talk to you again real soon.
