Restoring a neglected Picea (Spruce) bonsai forest

Bonsai Ideas
277 followers
8 Video Views·Mar 9, 2025
When you are looking at plants for sale, always make sure you check the pot.
I bought this plant at a big fair last weekend.
Over the weekend, lots of traders were there, one of which is a famous potter.
He was selling this tree. He said 50 bucks.
Great deal, I thought. Yes, it was a great deal because I picked up the pot
and I actually just wanted the pot because I love this shape.
This is gorgeous for the small juniper that I have.
It was one of his own pots and a very early one.
It looks like this is one from the late 90s.
This is almost a collector's item, so I made a great deal.
Now the question is, what am I going to do?
Renovate this. I'll have to completely rewire this.
There's lots of little buds on there, but yeah.
Wire, restyle and then repot in a new pot and use this pot for another tree.
Right, middle of winter. Now it's time to have a look at this forest.
There are typically way more branches on a tree like this than you need.
Very often what I see is that a tree that has just been styled
doesn't have all these little branches wired but just the primary branches.
This is what we're after all over the whole tree.
Keep in mind if you are styling a tree like this
that you really thin out these branches and start wiring all the sub branches and fan them out.
The more you open up these individual branches the more realistic the styling will look.
There's a couple of things that we need to do to make this better.
First of all the moss is here crawling up on the little trunks
and I'm going to remove them so I can better see what's happening here around the roots.
But I don't expect anything spectacular.
Next to that the branches have all come up so they need to be wired down a little bit more.
That way more sunlight can hit the surface of these branches and more buds will come up.
Here this branch is going to go and all the way come down.
Then I look at this trunk.
It is quite thick, it has nice movement and it's old but this part is really awkward.
It is a lot longer than the tree next to it
but there is a little side branch here that I might be able to use.
So I'm probably going to just cut this off.
Similarly if I look here this is a very long branch and it's a bit awkward.
It comes from the back of the tree and moves basically back into this forest part.
So I'm probably just going to cut it off and keep a little gin here in place.
This little branch will take over.
Moving up I'll have to see what I'm going to do here.
This is styled like a side branch which I could use.
I could use it all the way like this to really hang over the rest of the forest
and fill it up with side branches from here.
Or I could decide I'm going to clip it off and I'm going to try and bring it back up.
But I think this curve is already too strong to do that.
Now what is the order that I'm going to do these things?
I'm first going to clean out the soil.
Once it is cleaned out I'll start pruning and wiring the lowest branches on each of these trees.
They will set the rhythm for a tree.
So it looks like all of these are planted very shallow with all the roots on the surface.
So I'm not going to change anything on the planting angle.
That means that with that this cleaning for now is good enough.
I can see what's happening and I don't need to change anything on the planting angle right now.
Let's see whether the bark wants to come off.
It is winter.
It means that the bark is typically a little bit tighter on the branch than you'd have it in summer.
That's good for bending but it's not so great if you want to get the bark off.
But this is still okay.
Now what we see here on the lowest branch is opposing branches at many different locations.
And I can't remove all of them because the tree is quite bare.
But here this one at the base of this branch in an elbow I'm going to remove this one.
This is something that I'll have to do over time.
Every single time that I look at the tree remove individual side branches
that are really in awkward spots.
Now before I wire I always go through all the branches and I look for bifurbification,
trifurbification.
I clean that out.
Then I remove all the old needles that are on these branches.
I can't remove everything.
But if you have a branch like this and you say well this is this year's growth
and this branch as well then this is all a year older.
If you remove them it is a lot easier to get the wire on the branch.
Otherwise you always have to put the wire between the needles and I don't really like that.
And these opposing branches are just a result of how a spruce naturally grows.
It has a continuation bud and it has two side buds every winter.
So if you don't pay attention in spring this is what you're going to get a three-way split.
Now here I need to check one branch, two branch.
This one has a bifurbification so this one definitely is going to be kept.
Then there's a branch here to the left.
One to the right.
So this one could go out and I keep this one as a continuation.
Also if I look at the length there of equal length there's a tiny little bud sitting in there.
But neither of them has a lot of side branches.
So taking this out will improve structure and ramnification.
And then at that time if I'm going to wire it it is useful to have a little bit of open space.
Allowing the wire to sit snugly against the branch.
But you want to keep quite a few needles on there.
Don't make the branch completely bare because the needles are needed for photosynthesis of course.
So this is now pretty much ready for wiring.
Take a few more needles out and that's it.
For wiring I am going to be using thin copper wire.
Copper wire has stronger holding power per thickness.
And therefore these thin branches are set in place much more strongly using copper wire than aluminium.
Also it needs to stay on for quite a long time because spruce doesn't set their branches all that quickly.
That means that every time you bump a branch you want it to stay in place.
And then once that's done it's all done for wiring.
I always start with the most important branches.
These are the thickest ones and for that I have here 1.8 millimeters of copper.
And I'm just going to apply it straight on the trunk all the way to the top.
So this provides a nice anchor and will give me some ability to also move the top branch.
Keep in mind that as the branch gets thinner and thinner at a certain point
you can use a different strength wire.
You don't need to use the same wire all the way throughout the tree.
Before I decide how exactly I'm going to shape the branch.
Also wire all the side branches.
This I do of course with thinner wire.
And this probably is about one millimeter.
And here again as always I start parallel to the existing wire on the branch.
The main branch.
I can loop a few loops around the side branch that I'm going to position and wire with this one.
And then I just follow it down.
I'm going to go around the trunk at least once for stability.
And then when it reaches a side branch that I can wire with this I just loop it around and over.
And then I can just wire the whole branch out.
Just like that.
And as said this is already quite thick for this little ending.
And I'm just going to curve it inward a little bit so it doesn't loop out anymore.
Here finalize the looping.
Now I can wire these with much thinner wire than this.
These two I can still do with the wire that I had.
Problem is here they're very close to each other.
So what do I do?
I go all the way back up to this one.
And I say I'm going to wire you as well.
I'm just going to follow this one down.
Hook it around.
It's now anchored.
And I loop it around this branch.
Just like that.
And of course here I didn't plug the needles yet.
So I need to clean that out a little bit.
This is an iterative process right?
You plug clean wire, clean trim, everything mixed.
Make sure you don't push off these little side branches because they are useful for later.
And then it's always a choice which one do you take.
Well this is the thicker one.
So I'm just following the thicker branch and I'm wiring that out.
Trying to trap as few needles as possible.
And here I'm getting towards the end.
Note that the needles here are quite brown.
I don't think this branch is very strong or healthy.
So I'm not going to wire it out all that strongly.
And now basically I've got some of these main branches sitting.
And I can start positioning the whole lot.
And this branch I want to angle down quite steeply.
And then the ends a little bit up.
Fill this space with this branch.
And this can now come over the whole area.
Filling up the space a little bit more.
This in line with the other one.
Just like that.
This is a basic setting now for this branch.
Here I can add a little bit more wire and add it here.
These I can wire out as well but I'll do that with a lot thinner wire.
This is basically almost a hair.
This is enough.
This is thick enough to give it a very gentle positioning.
It doesn't need a lot more than that.
And of course once you're done laying it out.
Always check.
Here is a little trifurbification.
And I remove that one at the top.
And I look at the end and if there's more than two buds.
I remove one of them.
But here we're still okay.
So this is now laid out.
These are the first well one and a half two branches.
I can now do the one here in the back similarly.
But let's first look at the one on the right hand side.
Now this branch I want to get down to here.
And at the same time I was thinking about removing this.
And bringing this upright.
I think it will work having it like this.
Then I can just remove this whole part here.
I'm also not going to keep a gin or something.
I'm just going to remove it completely.
It is completely bare all the way up to here.
There's no side branches on either side.
I have a double branching here.
A bar branch.
Here it is just going to go.
Then for this branch I'm going to use again the somewhat thicker wire.
I'm going to go all the way up along the trunk line.
And I'm going to take this branch and also wire it over in this fashion.
Now it doesn't have to hold all that much on this main trunk.
So I'm using very wide loops.
Just to get all the way to the top here.
Where it does have to hold something.
And here all the way to the end as well.
I'm actually wiring the wrong direction.
On this angle it's a lot easier for me to wire.
And as before here also there are a lot of bar branches.
Opposing branches that really shouldn't all be there.
Now if I go all the way from the top.
You get one on the right.
One on the left.
So I want one on the right here.
Which works well because this has a side branch and some good buds.
So I could remove this one.
And then I would keep this one.
Which also has a nice side branch and a few buds.
And this one would be removed.
So just like this.
Clean out the whole branch.
I remove some of the needles.
To ease wiring.
There's a little branch going down.
I'm taking that out as well.
And now just like this.
I've cleaned this all up.
And I can take the thinner copper wire.
To wire out this branch structure further.
And all wired out we can now position them.
To create an evenly distributed pad of foliage.
And at the same time we of course need to make sure that this branch.
Gets the same downward angle as I have on the other branch.
And then lift it up a little bit to give natural slant.
Now this top I would like to bring back outward a little bit.
Hopefully this now fits a little bit with the shape that it already had.
Just like this.
And now I can wire this out also in individual little branches.
And this branch of course can now come back into this space as well.
Wire it out and bring this up a little bit.
And this way you shape it out as a much more natural tree.
Branch, another branch.
This needs to fill out.
Then I split the three branches into one in the back, one to the side and a new top.
This also will need to establish.
Now this is quite long.
It's going to go forward but not this long.
And there's a nice bud sitting there.
Now it's a matter of just wiring out all these other branches
and positioning them in exactly the same fashion.
And then deciding how this is going to pan out.
One thing that I am a little bit annoyed about is this trunk.
So there is gentle slender movement but not all that much.
And I don't really like how it sits.
And ideally I'd have it have a few tighter curves in there.
Something like this.
And instead of using one very heavy wire I'm using two somewhat thinner wires.
And I'm putting the second one in the middle between the first one.
This will aid in getting better support along the whole trunk line.
It's easier to apply and easier to remove.
And it helps reduce the risk of cracking.
But basically it is because I can't get in here with very thick wire at the moment.
Just too awkward.
Benefit is of course that here in the top I can more easily
apply the wire now to the big side branch that I want to reposition as well.
Just make sure that I end up over it.
Because I'm going to bend it down.
So over and around for this one.
Now it's just a matter of putting those extreme short bends in there without breaking the tree.
Because it's already an old trunk and it's not that pliable anymore without real heavy wire.
But at least it's got a little bit more movement now.
And I've decided to keep this long branch as a first very droopy branch in the composition.
Just like this.
So this can come down as well like that.
I think that will look okay.
And I realize this is quite a bit of wiring.
But this is part of the whole process of building a good bonsai.
Also wiring the whole thing out.
A good coniferous bonsai has been fully wired once completely in its life it is said.
And I think I agree with it.
You need to really wire the whole tree out once or twice to really get the shape set.
And this branch I'm not sure whether it will live.
It only has a few buds and a few needles.
But I'm going to try.
What I always find surprising is that when you start wiring out a tree like this
there's a lot more branches that you can use for the final styling than you'd originally think.
And as you are wiring these branches and the side branches
and you start whipping them up in different levels
all of a sudden there is all these additional opportunities.
So it looks like initially all these trees are very bare.
But then once you start wiring them out properly branch by branch
side branch after side branch you get a lot more volume.
And this basically if you're wiring a tree like this
make sure you really try to wire out all the individual side branches.
Because that is what gives volume to your tree in the long run.
You don't need a lot of branches.
You just need branches that are properly wired out and placed.
That creates the volume in the tree.
Now really make sure you grab each and every single branch
and wire them out and position them.
Because all these branches together is what makes the tree.
There are typically way more branches on a tree like this than you need.
But it does require you positioning all these side branches.
If you don't do this then you get very lumpy big branches.
But in the end for the illusion of a bonsai
it is good to have all these little side branches in place.
That is what brings the scaling and realistic looking stylings.
I truly believe that the fine wiring,
so the wiring of these little side branches,
is what makes the big difference between a refined bonsai
and an initial styling by somebody who is just starting off.
Very often what I see is that a tree that has just been styled
doesn't have all these little branches wired but just the primary branches.
And that's fine.
But it does require fine wiring as well at a later stage
to really get this open thin refined look.
By wiring out all these little branches I am allowing for more accurate positioning.
Now here I'm going to take a bit of a risk.
I'm just going to prune it back.
This is reasonably well laid out now.
And this creates a nice open pad that can grow on, can get back budding.
This is what we're after.
All over the whole tree.
So that means that every single one of these side branches
except for maybe the very shortest stumps need to be wired out.
And I think with that this styling is done.
It is now going to go outside into the garden.
It's going to be in the rain, in the wind.
I'm going to give it lots and lots of sun
because I want all these branches on the inside now to start budding.
And in early spring I'll just pull it out of this pot
and put in a more affordable container.
I'm going to plant my big juniper in this one.
Yeah, so keep in mind if you are styling a tree like this
that you really thin out these branches
and start wiring all the sub branches and fan them out.
The more you open up these individual branches
the more realistic the styling will look.
Every branch has its own space that it occupies.
It doesn't interfere with any other branches.
And they all grow outwards from basically the center of this group planting.
Overall the whole canopy needs to come together as if it were one tree.
And with that you get a realistic forest planting.
Now normally the tallest tree is the oldest tree
and also the fattest in this composition.
That is not the case.
But I've now removed lots and lots of the side branches
which explains why it isn't all that fat even though it is very tall.
I can fix this by letting one of the branches in the top run for two or three years
and then it will fatten up.
But as the bark is already quite aged I don't think I will.
Yeah, this is pretty much it.
Keep growing bonsai!
Thank you for watching and see you next time.
