🛠️ Venha descobrir o poder da sua criatividade e faça parte dessa jornada sustentável Aproveite o desconto exclusivo! https://sun.eduzz.com/1629449?cupom=PASCOA2025 cupom valido ate 31/03/2025
Bem-vindo ao Tudo Planta Artesanato com Cimento! Você adora artesanato e está sempre em busca de novos projetos DIY (faça você mesmo)? Então, você está no lugar certo! No nosso canal, você encontrará uma variedade de tutoriais criativos e inspiradores que transformarão simples materiais de cimento em verdadeiras obras de arte para decorar sua casa e jardim.
É maravilhoso ter você aqui comigo!! confie em mim, você vai amar trabalhar com reciclagens!! vamos juntos? (siga o perfil me ajude a divulgar) se gostou deixe comentario! if you like follow me and share si te gusta sigueme y comparte
Participe da Nossa Jornada! Não se esqueça de se inscrever, curtir e compartilhar nossos vídeos para não perder nenhuma novidade. Deixe seus comentários e sugestões - adoramos ouvir suas ideias e feedback!
Hello my loves, how are you all doing? Are you
sure? I'm very
happy to have you here with me in another
video. I want to thank you for the thumbs up
you gave me at the beginning of the video. This is
all very important for our channel.
Thank you very much. Today we're going to recycle
a little bit of Styrofoam, taking advantage of the fact that
Easter is coming, and we're going to make this
most beautiful baby in the whole world. I'm
sure you'll make it and you'll fall
in love. I'll take the opportunity to say that
there's a coupon available for anyone who wants to
take the course. Okay, guys, enjoy.
Let's go to the video. So come
with me. I have the dough here. The cement
and
Styrofoam. This one here, I'm going to make half and half.
First, I'll make the top part and
tomorrow I'll make the bottom part. I'm going to make
a piece that's not so big.
This part here will be the bottom of the
vase. Well, there it is. Put it
together. Okay. Let's start
shaping the cavity. Don't forget that it's going to
drag. After that, we're going to
cover it all with dough. We only
really need the structure. Okay,
if you want to make it with movement,
you have to put something behind it
so you can lift it up.
then you can stretch it more but
the ideal is that you put iron in.
ok you can put the forehead here. I'm going to put the
eyes here is the snout that I'm going to
work on it still here is the neck
and here the part of the
chest is where I'm going to make the
vase I'm going to leave it about a finger thick.
one finger is good. Look to have a good
cavity I'm going to fill this pantyhose
here with sand. ok. Wet soil
because we can
shape it in the shape we
want. you see the height. look at mine's height
here. it's
six fingers
already very high. you put it
there and start shaping it. it's so it's at the
height you
want to start lining it. I've
already made more dough. this one here will be a
different Pou that I didn't put the
phyllite.
if you want to hang this piece you
have to stick irons in it. so it
gains
sustainability. here the dough is
very rigid when it's dry. sometimes I take a
big risk in not putting iron
because I trust so much in this strength
that it becomes this this this material that I
don't put in.
but you can put it in if you
want, so I stuck it in. the iron from the head
to here the neck ok if you are not
very sure about the ear you can
put the little irons too just stick them
there ok
wait for it to dry and I will come back when it is dry ok being
very careful I will
take it out of here because I need to use the
table right good thing there is a little
plastic I will put it in the sun for it to
dry a little more ok so we
can work Only then
now we will work on this one
without forcing too much
here I will improve this cavity here ok I
will open it a little here to
make the back I need to make
the slits to stick the next mass there it
is the same scheme we will work
and leave
it baked ok so the
mass can dry I have already made the cement mass here with it
is the same mass and now I will work
here so I will wet it here oh
I will let it dry in the sun
preferably keeping it on top of the level
we modeled in the front it is ready
Now just wait for it to dry so we can
cover it with the mass giving all the
details and such ok I will put it there in the
sun and I will
come back to get an idea more or less
here I can't turn it over or it will fall down
ok it is already dry and now We're going to make
the cuts before modeling the
rebars. We're going to level them.
I made the cement dough with
clay. I don't have much of a table now because I
broke mine and only this
little piece was left here. What a
horror. I didn't make a very hard dough. It's
very soft. And then I'm going to start
working on it here. Starting from the bottom,
even opening everything up the same way. We model
everything. It can't be a very thin dough,
but it doesn't need to be
rough
either. Be careful, because I usually
break things here. The
position gets in the way a little, but I'm
sure you'll get
better at it because you're not
recording. It's easier, right?
Modeling PR min. You have to find the best
position so you can see it. So it
's a bit complicated.
The trick is to cover it, line
the brush with water, it evens out a little
crooked. That's all, but
to
this side. Because I'm filming from the front, but it
's all that, but to this side. Okay, I'll try to
move it more to this side.
Centered with this one.
Oh, so that's it. I'll let it
dry so we can go back. Okay, it's already
very
hot. I'm going to paint it all white,
after it dries I've been adding the
colors. I started painting right here because
I was doing a live, but there's no
mistake. I'm going to follow the same lines. Okay, I
painted it all white, then I got
a cream, then I came here, just covering the
middle. Oh, I put some
mascara around the little white eye. I'm going to paint it here
under the chin, too. I
put it upside down
so I can draw it
here. Okay, I really don't know what to do
here. I don't know if I should make a bunch of
flowers
here. Look, to clean the little eye, just
take a cotton swab with
water, let it run, okay? Pass it on the
glass, then pass it dry as soon as
it comes out.
Fill this one with little flowers. Okay,
I'm going to do this crazy thing with my finger.
You can do it with a cotton swab
too,
okay. It was supposed to be like this. Look, it's cute. It
's because of the
folds, you understand. It's going to go wrong.
So, I'm going to get a little
piece to
stamp. It's like a
hibiscus. It's coming out beautiful, right? Just be careful
not to hit the ears and break them
because I'm of these, you know,
wait for it to dry 100% to apply resin,
okay, I'll be right back. The resin is going to be very rough. I'll
spray it if I use the brush here, I
'll stain it. Dry it with the dryer.
So that's it, my loves. I hope
you liked this step by
step. It was very easy. I'm sure
you'll do it. When
you do it, tag me on social media
so I can see it. Remember that in the
description of this video there are links to the
masses. Okay, also leave
these links pinned in the comments so you
can learn how to make the masses. I
also want to inform you that there is a coupon for
those who want to take the course. Okay, it's very
cheap, very accessible. I'll leave the
link here in the description. Don't miss
this opportunity. There are many
exclusive classes for you who like to
work selling these pieces. Everything is
made with a lot of love, with a lot of care
for you. Okay, as soon as you
acquire it, tell me so I can
put you in our
craft group on WhatsApp. That way I
can help you with the whole
process. Check if you're subscribed
here on the channel. If the bell is activated,
so when I post new videos,
you'll be able to be notified share
if you can ok post it on
your social networks you can also
post it on WhatsApp groups which I
know there are a lot I'm counting on you a
big kiss may God bless
you all and see you soon bye bye
h