BALL SKIRT TUTORIAL | Removable Skirt

Design Party Clothes
24 followers
Already sore.
Okay, definitely gonna cut that.
Gosh, I'm probably gonna get a bruise.
Okay, what a good start.
Hi guys, this is Carla.
Welcome to my channel.
If you're new here, welcome as well.
Hello, hello.
So today I want to show you guys how I make an A-line ball skirt.
So I feel like the trend nowadays for gowns, especially wedding dresses,
is all about convertible dresses.
Because I feel like people invest a lot of money on the wedding dresses
and it just makes more sense to buy something that's convertible,
something you can re-wear.
I have an English mesh that I'll be using for today's project.
And that's really basically it.
Just this one.
I mean, it's literally just like a ball skirt.
And it will be a little bit see-through
because she will be wearing like a mini dress underneath it.
So the mini will have some appliques on it
which will kind of peek through the dress or the skirt.
So it's pretty sexy.
It will be floor sweeping.
I'm gonna leave a little bit of...
The train won't be too long.
It will be just long enough and easy to manage.
The dress will be worn for like a bridal party.
So it doesn't make sense to make the train super long
where it's, you know, hard to maneuver.
As you get later into the night,
obviously she's going to remove that skirt.
And you know, she has some legs.
So I guess that's it.
Let's start.
So my secret here is this elastic band.
I feel like if you have something thicker, that would be better.
But what I do is I basically just tie it around the waist.
And since the waist is right down here and it dips at the waist,
I don't want the elastic to ride up.
I'm just gonna go ahead and place pins on both sides.
That way it doesn't go up.
It stays down there where we need it to be.
So this is the selvedge up here.
You just want to make sure you're at a 90 degree angle here.
So I like to personally start on the center front panel.
So I want a center front panel, side front panel,
and I think I'm going to just use one panel for the entire back.
So what I do is I basically just like place it under the elastic like so.
So I want a little bit of gather on the waist.
Nothing too crazy.
Again, center front.
And you kind of just like even it out.
So again, if you don't feel comfortable cutting your fabric on the mannequin,
feel free to do it on a table or the floor.
So I'm going to go ahead and cut it because this is again the right height that I want.
Probably think I'm crazy but you just want to basically I'm just using the floor as my guide.
And the key here is not changing the angle of how you hold your scissors.
And you should be okay.
I feel like if you're working on a muslin, you should definitely try this trick.
Okay, so that's pretty straight.
After I do this, well for the center front panel, we're only going to do one obviously.
For the side front panel, I'm just going to go ahead and drape one side and then
I can lay that one flat on the floor and copy that for the other side.
Because at the end of the day, I still I don't want to like drape
the whole thing on the mannequin because I still want it to look, I still want it to be even.
So one way to do that for sure is to just drape the half side and just mirror it to the other.
The mannequin is actually a little bit longer than my client a little bit. That way I can
still adjust it. So after I cut this, I mean it's pretty clean actually right now. I'm like a pro
at cutting. No, I'm just kidding. Go ahead and actually lay this on the floor and kind of like
you know clean it up. So before cutting the excess fabric at the waist, I just pin the gathers in
place. So after cutting that center front piece, I go ahead and fold the fabric like so and then
cut along the weft. I then drape the side front panel the same exact way I draped the center front
piece. And like I said to keep it symmetrical, I'm gonna use that same piece as my pattern to cut
the left side of the skirt. I haven't shaped it just yet. So you can see it's a little bit off
over here. So I'm just gonna go ahead and true it out as I cut the fabric. I then place the pieces
back onto the mannequin just so I get a better idea of what it looks like and see if I like it
so far. I'm ready for my panel. I have an audience. She's listening. I'm basically just gonna cut this
the same length on the side as the side front bodice or the side front panel and then it just
gradually gets longer in the back. So I'm just gonna eyeball it and then again,
shape it on the floor and whatnot. So
Yay! What do you think, Osha? Do you like it? Do you like it?
So far that's it and then I'm gonna cut
the top part, shape it, and then replicate.
My god, I swear. Jesus. Okay, so after cutting the back panels, I went ahead and pinned together
the center back so I can sew it. I'm just gonna leave about seven inches from seven to eight
inches from the waist for the center back zipper and then basically stitch from here
down to the hem. I then sewed up all the seams except for the waist.
And to achieve the gathered effect along the waist, I start by adding two rows of base stitching
with half an inch spacing between and manually gather the fabric by pulling the threads.
I then proceed to cutting a strip of fabric which will be my waistband which measures 75
inches long and two and a half inches wide. So this is gonna be our center front. Side seams
right here and then our center back. Stitch these close the tail of our waistband. Stitch both sides
and keep these open because this is where we sandwich our skirt panels. Before joining the
waistband to my skirt, I make sure that I match up my notches first and then go ahead and pin it
right sides together. And then I do another parallel stitch in between the two base stitching
that I just did. What we're doing here is just sandwiching the skirt into the waistband like so.
So I'm gonna stitch on the ditch. Probably stitch it on five for now
again because I still might need to unsew this after the fitting in case I need to do some
adjustments. Okay so my manager approved. This is what it looks like right now. I'm gonna leave
this base stitching here for now because there's a big chance that I'm gonna need to
redo the waistband because the next step is for me to add the horse hair. Back is okay too. I like
the length so far. Like I said this is not my client size so I just make it fit on this mannequin
just so we get a better idea of what it looks like when it sits right at the waist.
And now I'm ready for my horse hair. And since horse hair takes a while to sew,
this is the part where I play the new episodes of Grey's Anatomy. If you haven't seen it,
the second episode, the last part of it, don't even. Cry fest. I cried rivers. I mean come on,
Derek's eyes? Like Shonda Rhimes need to figure out a way to bring Derek back. Like the show is
just not the same without him. Like I don't even care if they bring him back as a dog.
Like I seriously don't care. Just like bring him back. Anyway this is what it looks like after
spending another 30 minutes pressing the horse hair.
She likes chocolate covered strawberries and wine. She likes notes that say I love you all the time.
Roses at your feet. Baby girl be mine. Baby girl be mine.
Say thank you. Ocean say thank you all for watching mom's video today. I hope you all had fun.
We'll see you again next week. Bye. Do you like it? What do you think of it?
Ocean likes it. Do you like it? Oh me too. Me too. Bye.
It's so dark.
