FREE PATTERN ~ How to Sew a Tiny Foldover Pouch | learn to sew | beginner | sewing tutorial

My Bag Corner
8 followers
Hi everyone, Svetlana Sotyak here, and today I'm going to show you how to make these super,
super adorable tiny fold-over pouches. This sweet little pouch finishes at three and a half inches
wide by approximately three and a quarter inches tall by one inch deep, and it would make a really
lovely place to store your sewing notions or supplies, or it could definitely be used as a
super adorable little coin pouch. To make this pouch, you will need two panels of quilting
cotton for the exterior of the pouch, two panels for the lining, and two panels of the interfacing.
Now, I'm using Pellen SF-101 for my interfacing, but any medium weight fusible interfacing will
work, and all the panels are five inches wide by six inches tall. You will also need a three and
a half inch long either ribbon or leather lace. I'm using a one-eighth inch wide leather lace,
and this is going to be for our closure loop, and you will of course need a button.
Let's start by fusing interfacing to the wrong side of our exterior panels. So, place your panel
right side down. Now, place the sticky part of the interfacing along the wrong side of the panel,
like so, and then bring the iron down, adhering the interfacing in place. Make sure you just place
it down, hit it with some steam, lift it up, and place it down again. So, don't do any of these
motions, so you don't move the interfacing. So, place it down, lift up. Now, stack the two exterior
panels and the two linings on top of each other, making sure you place them right sides together,
like so. There we go. Actually, I'll keep my linings on the bottom.
Place them all on top of each other, and now I'm going to use my ruler and a fabric marking pen
to mark a half inch corner along, or half inch square, along each bottom corner, like so.
Half inches right here, and now I will use sharp fabric shears to cut out these corners,
cutting through all four layers. All right, and this is what my panels look like at this point.
My two exterior panels and my two linings are right here. Now, next step is to bring our closure
loop, form it into this loop, like so, and I'm going to add it to the top edge of one of the
exterior panels. So, I'm going to fold it in half, like so, pinch it gently up on top, and this will
mark the middle point of the panel for me, and I'm going to place this loop right side down along
this top edge, right here, and I will use a sewing clip to hold my loop in place. Now, make sure
the loop is not twisted when you placed it here. You want it to look nice and straight,
right here, and I'm now going to take it to the sewing machine and stitch this loop in place by
going back and forth a few times with my sewing machine. Now, I'm going to place my exterior
panels right sides together, like so, line up all the edges, so I make sure everything is neatly
lined up, and I will use a few sewing clips to hold my panels together, and I'm going to do the
same with my lining panel. So, again, right sides together and clip along the edges, the two side
edges and the bottom edge, and I'm going to take these panels to my sewing machine and stitch along
the side edges and the bottom edge using quarter inch seam allowance, back stitching at the
beginning and end, and I'm going to do the same thing for both panels. The only difference is in
my lining, I'm going to leave about a two inch opening in the bottom seam, so I marked it right
here. This will be my opening, that's where I will not sew, so I'll start stitching right here, back
stitch, go to the end, stitch all the way up, stitch on the other side, and come right here and have this
opening in the bottom seam. And now that we stitched all the way around the side and bottom edges of
both exterior panels, as well as the linings, it's time to press the seams open. I have my iron set
to cotton setting, and I'm using some steam as well, and I'm going to first press over the panels
like so to set my stitches. Just press all the way around, and now I'm going to press the seams open
one panel at a time. And to do that, I'm just going to place it right here on my pressing board,
open up the seam, first finger press, and now use my iron to set it in place.
And go all the way around like that on all the other seams. Once I'm done here,
I'll turn it the other way and again press the seams open on this side.
So,
my seams on both exterior panel, as well as the lining, are pressed open, and now it's time to
box the corners. So, to do that, I'm going to reach inside the pouch like so,
and flatten one side seam over the bottom seam like that. See how it forms a little nice flat
straight edge right here? And I'm going to use a sewing clip to clip this corner in place,
so it doesn't shift on me. And I'm going to do the same for the other side. Again, just open it up,
flatten the seam, the side seam over the bottom seam, like so, and clip to hold it in place.
This is what it looks like. We'll be taking it to the sewing machine in a minute,
but I'm just going to do the same for my lining.
Okay, so now I'm going to take it to the sewing machine and stitch along these
clipped edges right here, using quarter inch seam allowance, backstitching at the beginning and end.
Okay, now my gussets are nicely closed, and it's time to turn my exterior piano right side out,
like so. I'm going to push out the corners, make them nice and neat.
There we go. And now I'm going to place this exterior piano inside the lining. So again,
the lining is wrong side out, and the exterior is right side out. And I'm going to place the
exterior piano inside the lining, like so. Push it in gently. And I'm going to first line up the
side seams, one seam over the other. I keep the seams open right here, and I'm going to use a
sewing clip to hold them in place. And I'll do the same on the other side. There we go. Make sure
the seam is nicely open. There we go. And now I'm just going to add a few clips around the top edge,
just to make sure it doesn't shift while I'm sewing. And I want to make sure that my button
loop closure is nice and straight right here, pushed down at a 90 degree angle. And I will
put a clip right here to hold it in place. And just add one more clip on the other side. And
now again, I'm going to stitch all the way around this top edge, using quarter inch seam allowance,
and backstitching at the end. And I'll be removing the clips as I sew.
All right, I stitched all the way around. I'm going to now simply finger press this seam open,
the one on top, right here along the top edge. You could definitely use an iron for this step,
but I find that finger pressing works fine. So just finger press it right here. And now I'm going
to turn the pouch right side out through this hole in the lining. I will tug on it a little bit,
tug on the lining and the exterior, just gently smoothing out this edge right here between the
panels. And as you can see, I still have this hole in the lining right here. I will close it
in a little bit. And now I'm going to gently push the lining inside the exterior panel.
Like so. Make sure the corners are neatly matching the other corners. And
I'm going to roll this top seam between my fingers and my thumb, just to make it
nice and straight. Like so. Roll it, and then kind of run your fingers and your thumb
across it to make it nice and crisp. Like so. And now I'll add a few clips to hold the two layers
together. I usually add clips at my side seams to make sure it's all lined up. Like so. And now I'm
going to stitch along this top edge using 1 1⁄8-inch seam allowance. And I found out that
the best way to do it is actually turn the pouch lining side out, like that. And this way I have
nice, easy access to this seam right here, because I want to make sure that I can see what it looks
like on this front edge. So I will start right here. I will backstitch at the end when I get
to the same point. And this is quite tied around here, so just take your time. Sew slowly and you
should be fine. I will clip off any extra thread ends right here. And it's also time to stitch this
opening in the lining closed. So because we pressed the seams open, they neatly line up over each other
like so. And I'm just going to use a clip to hold it in place. And I'll stitch right here along this
edge using 1 1⁄8-inch seam allowance, backstitching at the beginning and end. Just make sure you
pull your exterior panel away from the lining so you don't get it caught in the stitches.
And now it's time to turn the pouch right side out. I went ahead and pressed along this top
stitched edge right here to make it nice and crisp. And all we need to do now is fold the
pouch over by about 1 inch right here. And I'm going to use my fabric marking pen to mark the
placement of the button. So I hold my folded edge right here, pull on this button loop, and just
mark where my button will go. So this is where my button should be. And I'm going to use a
hand sewing needle and number 8 pearl cotton to attach my button in place.
And I just like to attach it through the exterior panel only so I don't have any ugly stitching on
the inside of the lining. So just through the exterior, but it's fine if you want to go through
the lining as well.
All right, that's it. The pouch is all finished. Thanks for watching guys. Please push a like
button if you enjoyed this video. And don't forget to subscribe to my YouTube channel
so you don't miss any of my upcoming video tutorials. Bye!
