TOP 10 AIR DRY CLAY IDEAS | Minimal and Aesthetic Home Decor Projects

Crafted Touch
15 followers
20 Video Views·Feb 26, 2025
@simplybya
Hello everyone my name is Angelika and welcome to my channel. For today's video I've prepared
something slightly different. Since I started my journey on YouTube I've created many home
decor items using air dry clay. Those videos are very popular among other videos and projects on
my channel so I've decided to pick my top favorite air dry clay projects and put them together in
one longer video. I like working with air dry clay so it was quite hard to pick only 10 projects
but I tried to choose the most unique ones and the ones which in my opinion came out almost as
good as you would get them from the shop. So with that being said let's jump right into the first
project. Before I start to work of any clay project I like to protect my worktop with
greaseproof paper. It makes it much easier to clean like also helps removing the unrolled clay
from the table. I always take the amount of clay I need and knead it between my hands. Clay after
contact with the warmth from your hands and body becomes much softer and more flexible to work with.
I've also got my rolling pin which I only use for crafts. To create this wall hanging I roll out
piece of clay flat to the same thickness. Using round cookie cutter I cut out five identical
circles. To be able to hang them on the wall I need to create a hole which will help me to connect
each piece to the wooden towel. I basically found random item which I will be able to create small
holes with. So this is my full moon. Now I'm going to create other face of the moon. For next two
circles I'm cutting half of them out. Going with my finger I smooth the edges down.
And then again I'm creating holes on the top of each shape. For last two pieces I'm cutting out
three quarter of the whole shape. To make them identical I place one ready shape on the hole
and cut it the same place. After few days of drying clay become hard and more durable.
I take sanding block and sand down any imperfections. Of course still be quite
gentle while doing it as the pieces are quite small and thin so they might break if you put
too much pressure. Now pick up your favorite color and paint them. I've chosen gold acrylic
paint and I paint each piece all around few times. Once the paint is dry I can start attaching them
to my towel. I simply take cotton cord and make double knot to tie both parts together.
Then one extra string to the top for hanging it on the wall and my moon wall decor is ready.
This was one of my first air dry clay project I've created and I still like how it looks and
the vibe it brings to the room. To create this braided vase I will be using air dry clay but in
almost terracotta color. I will also be using tin. I roll out this clay and divide it into
smaller parts. Each of this part I roll with my hands to create long and thin kind of strings.
Cut this piece in half and then fold it in half. Length of this clay should match the height of
your tin. Place two same length pieces next to each other and start twisting them in opposite
direction away from each other. Lay them closer to each other and press them slightly together
to connect it. This way I've created one of many braids. I repeat the process to create
enough braids to cover my entirely tin. Then I take one braid at the time and place it on the
tin. I wrap each end around the edge of the tin and press it slightly down. Then I do the same
with each braid. Once it's all covered I roll another piece of clay and wrap it on the top
of the vase just to add some extra detail and finish it off. I really like the terracotta color
you can always use different clay or just spray paint it once it's dry. To create nice round shape
out of clay you will need any size of bowl. Place it upside down on the clay and trace it along the
line. Remove the excess clay and lift your bowl. Place cling film on the bowl which shape you want
to recreate. Cling film will help with removing the clay from the bowl when it's dry. Take your
round piece of clay and move onto the bowl. Tap the sides slightly so they stick to the bowl.
With the excess clay cut it off and join two ends together.
In situation like this wooden and brush come very helpful. To create small holes around the bowl
edges you would ideally need something what actually cuts the holes out. I didn't have
anything like this so instead I use some pointy tool which I press down and move around to create
hole. I try to keep the same distance between each hole. Once the all holes were done I've left it
to fully dry. After that time I remove it gently and using sanding paper I sanded down all the
edges and imperfections. To make it a bit stronger like also protect from humidity I applying thick
layer of gloss mod podge. You of course can use matt one it doesn't really matter. I apply it inside
and outside the bowl. Now it's time to create this unique detail for this bowl. I take quite thick
cord and measure four lengths of the bowl's edge. Then I take needle with the contrasting color
thread and tie it to the first hole keeping the thick cord in between. I go from the inside of the
bowl through the second hole, hold it in place and then push the needles through next hole. This way
the pink thread is pulled tight and holds the thick cord in place. I carry on with this process
all the way around the bowl. Once the first level is completed I move the cord above the first one.
Now instead of going through the hole I push the needle just under the first row of cord. I pull
it up and carry on to the next spot. Same with the next cord I tie it to the cord placed below.
I cut off the excess cord and my bowl is ready. I like the contrasting
colors of white and pink. Different color or cord will also look great.
This project is actually from my Christmas related video. I really like it so I've decided
to include it in here anyway. I will be using templates which I've created from kraft paper.
They are basically one third of circle. I've glued two pieces of paper together to make it a bit
stronger. I roll out the clay, move the template on the top of it and cut the exact shape out. I take
the paper part and roll it to create cone. Glue it with any glue to secure it. Then I take the clay
part and wrap it around the paper cone. I cut out the excess clay and connect two ends together.
To help with this process you can always use some sponge and water. I take my plastic cutter and
start creating star shape holes around the cone. Of course you can create any shapes. As I said
before this was the Christmas episode that's why I'm using stars but to be honest I think they are
universal and you can keep them out all year round. Once the clay dries I remove the paper part
and the tea holder is ready. I recommend using battery powered candle not the fire one.
For the next project you will need small round plate. Roll out piece of clay and cut out the
rectangle shape. Then divide this piece into same size straps. Altogether I will need seven of them
and they are as long as the diameter of the plate is. Before I place them on the plate I
wrap some cling film around it and then smooth the edges of each piece of the clay.
I place four straps horizontally and three vertically creating waving effect. It's very
easy just take one strap and go with it above the opposite one then under above and so on.
Once this is completed I leave it this position until fully dry. Pick up your favorite acrylic
paint and paint the whole tray. To make it more outstanding I take old toothbrush which I dip in
darker color paint and splash it above the tray creating this unique pattern. And again to protect
it I apply thick layer of mod podge. After creating this tray for the first time I was
really impressed with the result. It looks very high-end and modern. To create flower pot
out of clay find the right side plastic container and wrap it with cling film. It's important that
the container is plastic so you can squeeze it later when removing it from the clay.
Roll out big piece of clay and take the measurements from your container. This way
you will know how big piece you need. Using ruler cut out the rectangle shape which later
wrap around the container. This way you created sides of your planter. When you connect two ends
together you can make some small cuts on the one end water another end and then just press
both of them together. For the bottom of my planter I roll out another piece of clay. I place
my pot on top of it and then trace the exact shape as a bottom of my container. And then by tapping
slightly connect both of these pieces together. Now it's time to create the nose. I take small
piece of clay which I knead between my hands so it becomes softer. Then I start shaping the nose
shape. It's some kind of triangle with one side flat. Once I achieve the right shape I attach it
to the pot. With the knife I create small cuts which reflects lips. For both opposite sides of
the pot I'm adding three small balls as a special detail to the whole construction.
Before I leave it to dry I go around with water to smooth out any imperfections. Once it's dry
squeeze the plastic container and with gentle moves remove it. As you can see there is a small
crack inside the pot. It's not actually the crack it's just where the connection of the two ends is.
But that's not a problem. I take small piece of clay which I dip in the water and then fill the gap
To create texture effect on my pot I'm adding baking soda to my paint. And then using brush
I apply it all around my pot. For the edges I decided to paint them gold. And to secure the
inside of the pot from any damages or humidity I applied thick layer of mod podge. I really like
this pot. You can often see it on my intro. It's just so unique and looks high-end.
To create cactus wall hanging I've created templates which after putting together reflect
the cactus shape. I take each piece and transfer it its shape onto the clay. At first I go with
pencil and trace the lines around and then I take sharp knife and cut those shapes out.
I put them in the position they are going to hang on the wall
and start creating small holes to be able to connect them all together.
To create a pattern on each piece of the clay I will be using metal wire. I fold it in half
creating little loop at the one end. And with these three pieces from the right I'm going
diagonally down creating some sort of ditches. One is in the center plus two extra on each side.
For the arm parts of the cactus I just create small irregular dents. Once it's all dry I give
it a quick sanding. Using dark green acrylic paint I paint all the parts all around. Small
dents I'm filling with brown color paint. To give it more gloss I apply mod podge. I place all the
pieces in the right position so now it's time to connect them all together. I make small knot at
the front of the piece and then go through the other hole. And I do the same when connecting
two separate pieces together. If you're a plant lover this would be a great addition to your collection.
To create bell shape you will need some item which its shape reflects the bell shape. I found
this candle which I think would work perfectly. I take few measurements from this dish and transfer
them onto my clay. This part will create the wall of the bell. Now I have to create top for it. And
like in the previous project I place the item on the top of the clay and cut the round shape out.
This candle will work as my mod and to be able to remove the clay from it I secure it with
greaseproof paper. Try to make it as smooth as you can so you won't get any uneven shapes inside of
the bell. Starting with the rectangle shape I wrap it around the candle. I press it down so it takes
the exact shape. I cut out the excess clay and connect two ends together. And then I add the top
of the bell. To smooth the surface I use the sponge which I dip in the water. With the sharp knife I
straighten the edge of the bell and then remove it slightly from the candle. To make small hole at the
top I'm using metal straw but it can be any item which makes holes. Altogether I've created three
bells. Even they are white I apply extra white paint on them. And then with the black paint and
thin brush I've created some pattern on them. Of course these bells are more for the decorative
purpose so I'm only placing inside of it then wooden bead. I make few knots to secure it in
one place and then add more beads on the string for nicer finish. They look super cute hanging
from the wall. You can of course customize them whichever way you want by adding more color or
different pattern. This is a project for someone who loves plants but forgets about watering them.
I take piece of clay which I divide into smaller irregular parts. I take one piece at a time and I
roll it between my hands to create the ball. Then I take this ball and roll it between my hands again
this time creating more of the cone shape. I press it all down to flatten it. This way I've created
one of many parts of the zebra plant. As you can see I've made many similar pieces. I've tried to
create different sizes of them. I put them all on toilet roll to hold the right shape. Before I leave
them to dry I'm going to attach metal wire to each of them. I push the wire slightly into the thicker
end of the leaf. Deep enough so the wire stays in one position. After they are all dry I can start
painting them. I start with the green paint and then with the white paint and thin brush I create
horizontal lines. Once that is dry I cover them all with mod podge for gloss effect. Starting with
the most pointy part I wrap all the other leaves around it one at a time. Twisting the wire helps
to hold them all together in one position. I add another part to next spare space around the center
piece. I take terracotta board. I place some paper on the bottom and then start filling it with sand.
I put my zebra plant inside and then I top it up with sand. I think it came out looking very
realistic and cute. This project was my recent thrift flip. I've got this lamp for £1 from
thrifting store. I roll out big piece of clay which I'm moving onto this lamp. I basically create
coat for my lamp. I press it on down to reflect the exact lamp shape and with the knife I cut out
any excess clay. For the empty space I roll out extra piece of clay and fill it with it. All this
connection don't have to be super perfect as I'm going to create very busy pattern on it anyway.
Only make sure that they are connected together and staying in the right place. I cut out the
hole for the cable and straighten the bottom of the lamp. To create some kind of honeycomb pattern
I will be using plastic acorn but it can be anything what creates small and round
dents. I'm going with my acorn diagonally creating one row at the time. Dents don't have to be perfect
that's what creates this unique look. And then I create another row just next to the first one.
It's super satisfying process. Once the lamp was fully covered with dents I left it till dry.
I remove top part of the lamp and secure it with paper tape like also the cable.
I give it a good spray paint. I take the gold paint and sponge roller and I slightly go with
it around the lamp. This way you only paint the edges of dents leaving them clean and white inside.
I really like how this lamp turned out something very different to what I was
usually doing with the clay before. I hope you enjoyed this video if you did don't forget to
give a big thumb up and subscribe to my channel as I post new content every single Wednesday.
I will leave all the links to the original videos down below like also I created separate playlists
with all my air dry clay projects. And for now thank you so much for watching
have a lovely week and I will see you in my next video. Bye!
